Official DiscountVapers.com Thread
- Thread starter gormly
- Start date
- th_trl_thread_readers 0
- Status
Yep I was playing and vaping lol.I have an old laptop and it won't work on it.A 10 year old laptop but its nice and it works lol.
Hey Chopper, What kind of voltages are you getting out of this passthru? Is it variable?
Urge
Urge
Hi All, welcome to all of Erics newer Customers! Welcome to the Outstanding Value and Customer Service that IS Discountvapers!
Wanted to stop by since it was Dec 14th that I ordered our Go Go Dual Coil Cartomizers. LOL My Wife is still using the very same one she opened the day we got them. She uses the same juice in it all the time so it has not yet lost any flavor, th or vapor and I must say, I have not cleaned it yet either. These things are absolutely amazing!!
Hope everyone is having an awesome Weekend;
Nate aka Darth Vapor
Wanted to stop by since it was Dec 14th that I ordered our Go Go Dual Coil Cartomizers. LOL My Wife is still using the very same one she opened the day we got them. She uses the same juice in it all the time so it has not yet lost any flavor, th or vapor and I must say, I have not cleaned it yet either. These things are absolutely amazing!!
Hope everyone is having an awesome Weekend;
Nate aka Darth Vapor
5 volt I believe and sorry to say no variable.I don't have a multi meter to test this but it hits like crazy and I'm using a Boge 2.0 LR carto in my tank and its not frying it.Ive used it all last night and today and still going strong the carto I mean.
Football weekend?
I took my boys to the science Museum this weekend also, they loved it.
New goodies coming in this week.
Eric, How big(or small) did you make the hole (holes?) in the 3.5ml clearo? I would think 1/16th"-1/8th" would work well. Did you do one or two? Can I put in an order for the 3.5ml clearos and you will fill it when they come in or should I wait?
Alright, the Patriots are going to the superbowl-AGAIN! Damn, it's fun living in titletown.
Urge
Alright, the Patriots are going to the superbowl-AGAIN! Damn, it's fun living in titletown.
Urge
Last edited:
I opened the 3.5ml Clearo up for pre-orders along with the Go-go dual coils.
However...
1. Anything ordered along with it will also be delayed until I get them.
2. You can cancel anytime (just email me).
3. I cannot guaranty when they will arrive although I am going to pester them like mad.
The Go-go Dual coils went FAST and while I doubled (almost tripled) my last order, the response and email inquiries I am getting is enormous. So if you are willing to wait but want them as soon as they come in, Pre-order is the way. This will also allow me to plan the demand and have backup shipments on the way.
Note the three comments above apply to this as well.
Unfortunately no, the boges sell out within a day or so when I get them, I do not make any profit on them and at this point I'd rather order and sell what's on hand. Further, 95% of all orders for the Boge cartos are only for the boge cartros, no batteries, cases, drip tips etc. So I see the Boge product as a convenient way for some to save a little money when they are in stock. (which I am totally cool with)
This may and probably will change as I start to order more in the future, but my website was supported by Go-go users and I intend to keep them fully stocked once this Chinese New Year holiday is over. That doesn't mean I will not cater to the 510 market, only that my first priority is getting more Go-go back in stock.
But you can count on me to carry them as soon as I can, I still have 2/3rds of an order due me and I plan on ordering gain as soon as I get them.
I got my "pink" vision clearomizer tanks today. I haven't even had a chance to load one up yet but as soon as I do I'll be sure to leave a review on them. Thanks for such super fast shipping!
Two New Products to tide us over until the end of CNY
Ok, so these products are "filler" I do not have many in stock and while I have tested both of them I haven't decided if I will continue to order them. It'll depend on reviews.
First up
Ovale V6 Variable Voltage Kit
(the following is the description I wrote on the site)
The Oval V6 VV system is another breakthrough based on variable voltage, up to 6V from this simple and elegant handheld device.
The Oval V6 VV system provides a max of 6V voltage for maximum vapor
Operating voltage can be set to 3.7V, 5V and 6V, and is indicated by a red(3.7V) - orange(5V) - blue(6V) LED light display.
THE STARTER KIT CONSISTS OF THE FOLLOWING PARTS:
- 1X OVAL V6 VV SYSTEM WITH VARIABLE VOLTAGE DEVICE
- A 900MAH BATTERY 2X
- 1X LI-ION CHARGER (CHARGER UNIT)
- 2X CLEAROMIZER EVAPORATOR
The Ovale can be used with all of our clearomizers including the LED light ups, 4.5ml Tanks and even the giantomizer (with 510 to ego adaoters) and can evn be used with the Go-go cartomizer (with appropriate adapter)
Note: the two included cartomizers are optimized for 6V usage, however do NOT use Low Resistance cartomizers or any cartomizers under 3.0ohm at the higher voltages, doing so may cause damage to the device and or cartomizer. I will not accept returns for overvolting errors (I can tell)
. Please be sure of the ohm rating of cartomizers you are using.
My review:
I like it, it is a nice little hand held and comfortable VV device. The included cartomizer works best at 5V but is still good at 6V even though that might seem kind of high. The carto is a perfect match to the voltage.
The 3.7 setting can be used with just about anything I have in stock (some require adapters)
It's a 510 system but works with the giantomizers (and looks really cool with them) and also Go-gos.
But HEED THE WARNING, do not use the higher voltages with the lower ohm cartos. Go-go's seem ok at the 5V but I didn't want to try the 6V My personal recommendation is to only use the clearomizers on this device.
************************************
Next up:
Nova LCD 650mAh Kit
LCD Unit keeps track of puff count and remaining battery life. Rechargable with mini USB cord, plug in, not a screw in like other devices.
Extremely light compared to other ecig devices.
Please note: While I believe this is a nice electronic device, light and produces good vapor and flavor, the cartridge is proprietary I do not have stock of the cartidges yet. It is cleanable and resuable but at this time, replacements aren't available. Also, on several of these items I have noticed slight imperfections in the paint around the silver band, and due to it being plastic rather than metal, it is a ,bit more fragile. Not "drop and it shatters fragile" but still, less than metal counterparts. Please keep this in mind when ordering.
NOVA Features:
* Unique design
* Plastic body shell, feels light and delicate
* LCD screen to show battery capacity
* 1.2 ml clearomizer
* Automically locked when press 5 times within 2 seconds
* With Mini USB 8 Pin compatiable with generic USB mini cords
Contents:
1. 2 atomizer / clearomizer
2. 1 battery
3. 1 USB charger
4. 1 USB adapter
5. 1 10ml Bottle
6. 2 tip
Size: L148 x D23mm
Weight: 76g
Battery capacity: 650mAh
Battery lifespan: 300 times
First thing you will notice is the price...; 24.99 It actually should be lower than this but with the small order quantity and shipping I had to add a little more to it. I do not have replacement cartos right now and I wont be able to get them until mid February, if I sell a few of these I will order them.
My review:
Very light, works well, vapor production is up there with the best of them.
This has one of the smoothest tastes and full vapor production I have tested.
Feels a bit cheap when you swap with any metal ecig but that's due to the injection molded plastic.
The carto is cleanable so it should last a while, at least until I get replacements in. No adapter I have seems to work with this although it is a 808D or at least certainly seems like it but it has outside threads on the connector which I haven't seen before. Nothing but the original carto works with this.
****************************
I didn't get many of these for the simple reason that they were only purchased because no one else would ship anything before the holiday and I thought it was cool looking
Ok, so these products are "filler" I do not have many in stock and while I have tested both of them I haven't decided if I will continue to order them. It'll depend on reviews.
First up
Ovale V6 Variable Voltage Kit
(the following is the description I wrote on the site)
The Oval V6 VV system is another breakthrough based on variable voltage, up to 6V from this simple and elegant handheld device.
The Oval V6 VV system provides a max of 6V voltage for maximum vapor
Operating voltage can be set to 3.7V, 5V and 6V, and is indicated by a red(3.7V) - orange(5V) - blue(6V) LED light display.
THE STARTER KIT CONSISTS OF THE FOLLOWING PARTS:
- 1X OVAL V6 VV SYSTEM WITH VARIABLE VOLTAGE DEVICE
- A 900MAH BATTERY 2X
- 1X LI-ION CHARGER (CHARGER UNIT)
- 2X CLEAROMIZER EVAPORATOR
The Ovale can be used with all of our clearomizers including the LED light ups, 4.5ml Tanks and even the giantomizer (with 510 to ego adaoters) and can evn be used with the Go-go cartomizer (with appropriate adapter)
Note: the two included cartomizers are optimized for 6V usage, however do NOT use Low Resistance cartomizers or any cartomizers under 3.0ohm at the higher voltages, doing so may cause damage to the device and or cartomizer. I will not accept returns for overvolting errors (I can tell)
. Please be sure of the ohm rating of cartomizers you are using.
My review:
I like it, it is a nice little hand held and comfortable VV device. The included cartomizer works best at 5V but is still good at 6V even though that might seem kind of high. The carto is a perfect match to the voltage.
The 3.7 setting can be used with just about anything I have in stock (some require adapters)
It's a 510 system but works with the giantomizers (and looks really cool with them) and also Go-gos.
But HEED THE WARNING, do not use the higher voltages with the lower ohm cartos. Go-go's seem ok at the 5V but I didn't want to try the 6V My personal recommendation is to only use the clearomizers on this device.
************************************
Next up:
Nova LCD 650mAh Kit
LCD Unit keeps track of puff count and remaining battery life. Rechargable with mini USB cord, plug in, not a screw in like other devices.
Extremely light compared to other ecig devices.
Please note: While I believe this is a nice electronic device, light and produces good vapor and flavor, the cartridge is proprietary I do not have stock of the cartidges yet. It is cleanable and resuable but at this time, replacements aren't available. Also, on several of these items I have noticed slight imperfections in the paint around the silver band, and due to it being plastic rather than metal, it is a ,bit more fragile. Not "drop and it shatters fragile" but still, less than metal counterparts. Please keep this in mind when ordering.
NOVA Features:
* Unique design
* Plastic body shell, feels light and delicate
* LCD screen to show battery capacity
* 1.2 ml clearomizer
* Automically locked when press 5 times within 2 seconds
* With Mini USB 8 Pin compatiable with generic USB mini cords
Contents:
1. 2 atomizer / clearomizer
2. 1 battery
3. 1 USB charger
4. 1 USB adapter
5. 1 10ml Bottle
6. 2 tip
Size: L148 x D23mm
Weight: 76g
Battery capacity: 650mAh
Battery lifespan: 300 times
First thing you will notice is the price...; 24.99 It actually should be lower than this but with the small order quantity and shipping I had to add a little more to it. I do not have replacement cartos right now and I wont be able to get them until mid February, if I sell a few of these I will order them.
My review:
Very light, works well, vapor production is up there with the best of them.
This has one of the smoothest tastes and full vapor production I have tested.
Feels a bit cheap when you swap with any metal ecig but that's due to the injection molded plastic.
The carto is cleanable so it should last a while, at least until I get replacements in. No adapter I have seems to work with this although it is a 808D or at least certainly seems like it but it has outside threads on the connector which I haven't seen before. Nothing but the original carto works with this.
****************************
I didn't get many of these for the simple reason that they were only purchased because no one else would ship anything before the holiday and I thought it was cool looking
I just got my 4.5 ml Vision today and it is working real good so far. I did lay it down for a while and the juice drained back into the top part of the tank. Is this normal? It does seem to go through the juice rather quick but I guess that is to be expected with all the vapor these produce. Has anyone tried Atomic Cinnacide in these? That juice seemed to destroy my ggdcc's rather quickly.
I just got my 4.5 ml Vision today and it is working real good so far. I did lay it down for a while and the juice drained back into the top part of the tank. Is this normal? It does seem to go through the juice rather quick but I guess that is to be expected with all the vapor these produce. Has anyone tried Atomic Cinnacide in these? That juice seemed to destroy my ggdcc's rather quickly.
Yes, it's normal, there are two holes at the top.
It will drain back down when it's back upright. Poor design, I think they need to mold the stoppers better so that the fill holes are tapered toward the bottom so you could still fill it but it wouldn't leak out.
maybe I'll send them a diagram
I was wandering around ECF this morning and found this thread...
http://www.e-cigarette-forum.com/forum/experiments-equipment/10475-cola-method-taken-another-level-works.html
I have issues rebuilding the cartos that go in Chopper's tank. I can't get the filler to slide down past the barbs that stick out from where they punched the holes. Rebuilding the regular cartos is no problem. I am thinking of just buying the regular stainless steel cartos and drilling them out myself so I don't have any sharp metal sticking into the carto. I am also thinking about converting my tanks to use the 3.5ml clearos when Eric has them back in stock. They are SO easy to clean. In the meantime, I like this concept of soaking the cartos in the ice machine cleaner and having it remove the residue without having to do a dry burn. Eventually, if you do the dry burns they are going to burn out the coil. Has anyone here tried this? What was your experience?
mohawkx-have you tried this? What do you think?
Urge
http://www.e-cigarette-forum.com/forum/experiments-equipment/10475-cola-method-taken-another-level-works.html
I have issues rebuilding the cartos that go in Chopper's tank. I can't get the filler to slide down past the barbs that stick out from where they punched the holes. Rebuilding the regular cartos is no problem. I am thinking of just buying the regular stainless steel cartos and drilling them out myself so I don't have any sharp metal sticking into the carto. I am also thinking about converting my tanks to use the 3.5ml clearos when Eric has them back in stock. They are SO easy to clean. In the meantime, I like this concept of soaking the cartos in the ice machine cleaner and having it remove the residue without having to do a dry burn. Eventually, if you do the dry burns they are going to burn out the coil. Has anyone here tried this? What was your experience?
mohawkx-have you tried this? What do you think?
Urge
I wish I could do the drilling method, the only reason they aren't drilled right now is I do not have a guaranteed method to eliminate shavings from the metal getting sucked up into your lungs after the drill. I hesitate to take the fill out first and then repack because it's never perfect afterwards.
as far as dry burns, in my non professional opinion, they will not harm the coil unless you burn them for more than 5 seconds at a time over and over, the Nichrome is made to handle the current, at least for a short time. The purpose of the dry burn is to burn off the gunk that doesn't get burned off because it's always wet, but Nichrome can be heated up without a problem for short periods of time.
Personally I would never use a chemical to clean a cartomizer, trace residues and all that.
That's not to say you shouldn't, it's just my personal take on it.
OK these are my first tanks of any sort (I know, I'm woefully behind the times) but I'm absolutely in love! Please tell me you have more clears coming. I love the purple but having a dozen of one color seems a bit silly
OK these are my first tanks of any sort (I know, I'm woefully behind the times) but I'm absolutely in love! Please tell me you have more clears coming. I love the purple but having a dozen of one color seems a bit silly
You mean the 4.5's? I don't have clear but I have green, blue and pink, I am going to get more yes and translucent white will be one of them but I am not sure they come in clear. I will find out.
Just to be clear these aren't technically "tanks". They are cartomizers with a tank like capacity. Tanks are generally an acrylic casing around an existing and replaceable carto. Just so you know, I call them tanks only because they look like them
I have dry burned cartos 15-20 times in a row to clean off all the gunk. I burn them until the light goes out(7 secs?). I have lost a few cartos but I couldn't directly attribute that to dry burning them. I do think that dry burning will eventually cause them to fail earlier than they would otherwise. As far as using phosphoric acid to clean them, this product is used to clean out water lines in a fridge used to make ice. If this was a potential hazard I think the govt. would be there saying you can't do that. Short of that there would have been civil or criminal complaints if this was an issue. Of course, after cleaning you should thoroughly rinse them out. The thread I referenced is almost 3 years old, if it was an issue don't you think this problem would have come up?
Eric, is there any possibility that the folks who make the cartos might drill the hole for the tank rather than punching it. They could do that before they put in the filler and assemble it so no metal shavings.
Urge
Eric, is there any possibility that the folks who make the cartos might drill the hole for the tank rather than punching it. They could do that before they put in the filler and assemble it so no metal shavings.
Urge
- Status
Similar threads
- Locked
