Official DiscountVapers.com Thread

Status
Not open for further replies.

Zooker

Ultra Member
ECF Veteran
Verified Member
Mar 30, 2012
1,732
6,473
Washington State
Can anybody recommend an atomizer that takes alot of juice? I want to try dripping again but I just feel like its so tedious!! Is there an atty out there that takes like 20-40 drops??

I don't know if this is old news or not to you kaleb, but just yesterday I heard of Bonuts...basically all it is is rollling pieces of stainless steal mesh/screen (pipe screens) and curving them into a u-shape to fit around the inside of your atty, you then drip on them and it holds way more juice. If you search for "bonuts" here on the forum, you'll find lots of info on them.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
The vision eternity does. I was able to drop about 35 drops. But I think some people have done 40 with no problem. It's a rebuildable though, so unless you have done rebuildables before, this may not be the one for you. I don't think DV carries it, though.

No I have been told I should stay away, has a hit or miss leaking problem??
 

wolandepiphanius

Darth Wolandvader
ECF Veteran
Verified Member
Jun 22, 2012
4,538
9,067
San Francisco, CA
No I have been told I should stay away, has a hit or miss leaking problem??

I haven't had a problem with leaking, but I know some people do. I think the problem is that you need to rebuild with a very thick wick, and not use the one that comes with it (though that did work). I used a 3mm & a 1.5mm wick together and dropped around 30 drops, tilting the eternity while doing it, and no leaks. I've had it for about 2 weeks now and I do like it even though I'm not too fond of dripping.

But the plus side is that it can be converted to use those old ego-t tanks. So you actually have 2 devices in one. And the tanks don't leak because if they do, the juice will just drop into the bottom chamber. And it works better than the old ego-t tanks ever did. But frankly, I wouldn't buy another one. One is enough for me, but others who love dripping might like them even more.
 

philly1234

Senior Member
ECF Veteran
Verified Member
Aug 26, 2012
128
129
baltimore
As an Update the the DV Vivi Nova

The new ones I received now take the same head as the DV Mini Nova, which is a good thing, but they are different from the original DV Nova which is a bad thing.

If you purchased a DV Vivi Nova 2.4 or 22.8 tank (unit only) prior to October 15th then you need the Universal coil head.
If you purchased a DV Vivi Nova 2.4 or 22.8 tank (unit only) after October 15th then you need the "DV Vivi Nova coil head".

If for some reason the Universals are not fitting (happened to kaleb) I will swap the old one for the new one.
Kalbe has sent me a older unit so I can make ceryain which head will fit it, I'll go through as may as I can to see if there is something up with them and figure it all out.

For now...the "DV Vivi Nova tank" now uses the "DV Vivi Nova coil head".
Going forward all DV Vivi Nova, 3ml and Mini will take the same head so no need to buy different heads any more.

The manufacturer explicitly denies these have ever taken any other head which is obviously bull....

Kind of confused on this issue...so all this is only about the DV Vivi Novas 3 mils and not the DV minis...or does this include the minis? I ask because I bought one mini before the 15th, and one later when they came back in stock. The current mini heads will fit both of these, or I need two different heads? Should I say replacement heads before someone makes a bad joke?
 

KalebK

Vaping Master
ECF Veteran
Verified Member
Apr 2, 2012
3,181
5,526
Spokane, WA
I don't know if this is old news or not to you kaleb, but just yesterday I heard of Bonuts...basically all it is is rollling pieces of stainless steal mesh/screen (pipe screens) and curving them into a u-shape to fit around the inside of your atty, you then drip on them and it holds way more juice. If you search for "bonuts" here on the forum, you'll find lots of info on them.

Awesome, thanks Zooker, I'll look into that!!
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Kind of confused on this issue...so all this is only about the DV Vivi Novas 3 mils and not the DV minis...or does this include the minis? I ask because I bought one mini before the 15th, and one later when they came back in stock. The current mini heads will fit both of these, or I need two different heads? Should I say replacement heads before someone makes a bad joke?


Your DV Mini and ALL DV Minis take the same heads, they are listed as "DV Mini Vivi Nova Coil Head"
The NEW DV Vivi Nova (not mini) ALSO takes the same head but I have listed that one as: "DV Vivi Nova Coil Head" just to avoid any confusion going forward.

Kaleb sent me an original DV Vivi Nova that I was out of stock on to compare to the newest batch I received and I am going through it today it is clearly different from the original and I will post a specific rundown on it shortly but you are all set with either of the heads listed above.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
I have a serious question to pose to the community.

I just got done reading this:
Notes on Child Nicotine Poisoning and E-Cigs | Ecig Advanced News

In the article it brings up a valid point about colorful labels and enticement of children. I use colorful labels on most of my liquid.
I would like some opinions, I just recently redesigned my labels and they are still colorful and look enticing somewhat possibly to children.

Should I make my labels black and white with a big SKULL and Poison notification on it to discourage potential use by a child?
 

d9mel

Super Member
ECF Veteran
Verified Member
Jan 14, 2012
498
369
Spa City
Customers buy e liquid for the quality e liquid, not the appearance of the packaging... hopefully. I think b&w labelling is a good idea.
I also believe all vapers should treat their liquid as a potentially hazardous chemical. Proper organization and storage helps to prevent misplaced liquids and keeps them out of reach of the little ones.
I have a 14 year old son, and in the year that I've been vaping have kept an open dialogue about the severe danger associated with the products that I use.
Every situation is different and common sense and safety is critical.
Thanks for bringing up this topic
 

BuGlen

Divergent
Supporting Member
ECF Veteran
Mar 6, 2012
1,952
3,976
Tampa, Florida
I have a serious question to pose to the community.

I just got done reading this:
Notes on Child Nicotine Poisoning and E-Cigs | Ecig Advanced News

In the article it brings up a valid point about colorful labels and enticement of children. I use colorful labels on most of my liquid.
I would like some opinions, I just recently redesigned my labels and they are still colorful and look enticing somewhat possibly to children.

Should I make my labels black and white with a big SKULL and Poison notification on it to discourage potential use by a child?

The B&W label should be fine, especially if you can get ink that won't run if some of the juice gets outside the bottle. Also, if you have room on the label, a poison symbol like you've mentioned wouldn't be a bad idea. It doesn't have to be huge, but just large enough to not be overlooked, and that should be fine.

Ultimately, I agree with d9mel that it is the responsibility of the adults (parents) in the household to ensure that dangerous chemicals are out of the reach of small children. Adding a warning to the invoice you ship with the products might be a good idea as well.
 

sparky parker

Senior Member
ECF Veteran
May 6, 2012
95
152
central illinois
I have a serious question to pose to the community.

I just got done reading this:
Notes on Child Nicotine Poisoning and E-Cigs | Ecig Advanced News

In the article it brings up a valid point about colorful labels and enticement of children. I use colorful labels on most of my liquid.
I would like some opinions, I just recently redesigned my labels and they are still colorful and look enticing somewhat possibly to children.

Should I make my labels black and white with a big SKULL and Poison notification on it to discourage potential use by a child?

I dont think the skull would help, my 4 year old loves skulls ( including my skull drip tip ), might try circle with line (like on no smoking signs).
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
this is my newest label before I though about color schemes:

newlabel.jpg
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
New Product:

Artemas Locking 510 DCT - Gun Metal - Exclusive Edition

This is a very sharp looking tank, if you like smoktech cartos this is a huge winner.






NEW version of the DCT Tank! IN Gun Metal

What makes this Artemas tank exclusive you ask? Good question!
It comes with your choice of Single Coil or Dual Coil Carto and a matching drip tip. NO EXTRA COST!
Ok so the drip tip isn't Gun Metal, but it's as close as I could get and it's not a cheap one, it's an Anodized Slate 510 Drip tip
Completes the look and looks extremely sharp all together.

Comes with a grooved channel on the bottom to hold the cartomizer and keep it from spinning. Plus a bottom cap screws on locking the cartomizer in place..
Now the cartomizer will not spin or come out by accident.
Made of anodized aluminum top and bottom with a plastic window in the middle


1.5 ohm DUAL hole pre-punched Smok Tech dual coil 510 cartomizer
OR.
1.7 ohm single hole pre-punched Smok Tech single coil 510 cartomizer

Holds about 5ml of e-liquid

Please note this does not come pre assembled, you'll get a packaged Artemas Gun Metal tank, a packaged Carto and a packaged Drip tip!
We won't get our grubby fingers on your tank (although we do recommend you clean the metal outside parts of the tank to a nice shine before using.).



Eric's review:
Hey come on, I put this together how could it be anything more than amazing! .It takes all smoktech replacement carto's has a spin blocker cap and is a solid and beautiful tank, who doesn't like Gun Metal?

***************

I also have this in black and chrome (but without the special tip or carto selection)
Plus we received a bunch of replacement cartos today in many resistances and coils.

****************

Vision eGo Spinner 1300mah - Chrome

No pic yet, sorry, camera battery died afgter taking the artemas pictures.

But it's shinny!

**************

Drip tips galore!


510 Bronze Vase drip tip


510 Rose Copper Vase drip tip



Two Glow in the dark tips, the vase tip is back in stock and a new standard 510.

Glow In The Dark Drip Tip - 510


Glow In The Dark Drip Tip - Vase



Snake Drip Tip



510 Gyroidal Extreme stainless steel drip tip




Drip Tip - 510 Stainless Short drip tip


******************

Plus:

Kanthal wire in 28, 30, 32, 34!
 

KalebK

Vaping Master
ECF Veteran
Verified Member
Apr 2, 2012
3,181
5,526
Spokane, WA
New Product:

Artemas Locking 510 DCT - Gun Metal - Exclusive Edition

This is a very sharp looking tank, if you like smoktech cartos this is a huge winner.






NEW version of the DCT Tank! IN Gun Metal

What makes this Artemas tank exclusive you ask? Good question!
It comes with your choice of Single Coil or Dual Coil Carto and a matching drip tip. NO EXTRA COST!
Ok so the drip tip isn't Gun Metal, but it's as close as I could get and it's not a cheap one, it's an Anodized Slate 510 Drip tip
Completes the look and looks extremely sharp all together.

Comes with a grooved channel on the bottom to hold the cartomizer and keep it from spinning. Plus a bottom cap screws on locking the cartomizer in place..
Now the cartomizer will not spin or come out by accident.
Made of anodized aluminum top and bottom with a plastic window in the middle


1.5 ohm DUAL hole pre-punched Smok Tech dual coil 510 cartomizer
OR.
1.7 ohm single hole pre-punched Smok Tech single coil 510 cartomizer

Holds about 5ml of e-liquid

Please note this does not come pre assembled, you'll get a packaged Artemas Gun Metal tank, a packaged Carto and a packaged Drip tip!
We won't get our grubby fingers on your tank (although we do recommend you clean the metal outside parts of the tank to a nice shine before using.).



Eric's review:
Hey come on, I put this together how could it be anything more than amazing! .It takes all smoktech replacement carto's has a spin blocker cap and is a solid and beautiful tank, who doesn't like Gun Metal?

***************

I also have this in black and chrome (but without the special tip or carto selection)
Plus we received a bunch of replacement cartos today in many resistances and coils.

****************

Vision eGo Spinner 1300mah - Chrome

No pic yet, sorry, camera battery died afgter taking the artemas pictures.

But it's shinny!

**************

Drip tips galore!


510 Bronze Vase drip tip


510 Rose Copper Vase drip tip



Two Glow in the dark tips, the vase tip is back in stock and a new standard 510.

Glow In The Dark Drip Tip - 510


Glow In The Dark Drip Tip - Vase



Snake Drip Tip



510 Gyroidal Extreme stainless steel drip tip




Drip Tip - 510 Stainless Short drip tip


******************

Plus:

Kanthal wire in 28, 30, 32, 34!

Ohhh!!! Everything is so shiny and pretty!!!
 

philly1234

Senior Member
ECF Veteran
Verified Member
Aug 26, 2012
128
129
baltimore
Your DV Mini and ALL DV Minis take the same heads, they are listed as "DV Mini Vivi Nova Coil Head"
The NEW DV Vivi Nova (not mini) ALSO takes the same head but I have listed that one as: "DV Vivi Nova Coil Head" just to avoid any confusion going forward.

Kaleb sent me an original DV Vivi Nova that I was out of stock on to compare to the newest batch I received and I am going through it today it is clearly different from the original and I will post a specific rundown on it shortly but you are all set with either of the heads listed above.

Gotcha...thanks!
 
Status
Not open for further replies.

Users who are viewing this thread