Official DiscountVapers.com Thread

[gormly]

STOCK:

Our stock situation is going to be pretty bad in about two weeks, as I have said before our sales are through the roof, we had our busiest day ever Friday. Because we have to order 3-4 weeks in advance and I purchase based on sales trends, I thought I had stocked up on enough items, for example the Kanger T3 and T2 coil heads.. well previous estimates gave us enough stock to last two months, at the current rate of sales (over the past 3 weeks).. it's two weeks supply and it's like that for every single product lately.

Lowering my prices probably didn't help the situation either (lol)

I am doing my best to get my orders in for when the factories open again after their holiday but I am not optimistic about my stock levels. I am also trying to source "locally" from friendly vendors and friends (which sadly in this industry are few and far between) so please bear with me, if you need to go somewhere else but you feel loyal.. do what you need to do.

I will restock everything, but if I am out in the next week or so keep in mind I will not get any shipments until the 3rd week of February at the absolute earliest if you can hold out great, if not.. just get it where you can (and come back next time)

I still have some orders due this week, some new stuff and all the smoktech cartos, more AGA's and more stuff from Kanger but it's not really enough, I hope it is but probably not.

so if you see a bunch of things go out of stock, I am still carrying them, it's just a symptom of being successful at the absolutely wrong time..

 

[gormly]

Oh and wouldn't you know, after getting post notifications for almost a full week from ECF on posts.. poof, they are now gone again....

 

[wolandepiphanius]

STOCK:

Our stock situation is going to be pretty bad in about two weeks, as I have said before our sales are through the roof, we had our busiest day ever Friday. Because we have to order 3-4 weeks in advance and I purchase based on sales trends, I thought I had stocked up on enough items, for example the Kanger T3 and T2 coil heads.. well previous estimates gave us enough stock to last two months, at the current rate of sales (over the past 3 weeks).. it's two weeks supply and it's like that for every single product lately.

Lowering my prices probably didn't help the situation either (lol)

I am doing my best to get my orders in for when the factories open again after their holiday but I am not optimistic about my stock levels. I am also trying to source "locally" from friendly vendors and friends (which sadly in this industry are few and far between) so please bear with me, if you need to go somewhere else but you feel loyal.. do what you need to do.

I will restock everything, but if I am out in the next week or so keep in mind I will not get any shipments until the 3rd week of February at the absolute earliest if you can hold out great, if not.. just get it where you can (and come back next time)

I still have some orders due this week, some new stuff and all the smoktech cartos, more AGA's and more stuff from Kanger but it's not really enough, I hope it is but probably not.

so if you see a bunch of things go out of stock, I am still carrying them, it's just a symptom of being successful at the absolutely wrong time..

The only thing I want right now are the fc-2000 ceramic wicks. So, I'm good.

 

[bmrdave]

Re: Haze

What if you just mix the flavoring used in Haze into dropper bottles and sell that without telling us what's in it? Then we could just add it to the nic base of our choice and you would save a lot of time but still make money.
I'm rotating mine with some other juices to make it last but it's still my favorite and the only stuff I ever "chain" vape.

 

[philly1234]

Re: Liquids

Are you going to stock up on the Halo again, or was that a bust? I'd rather get everything from you, but if you're not going to restock I guess I'll go back to the source.

 

[calpis]

Eric, you're awesome. Just saiyan.

 

[Tully Mars]

Re: Liquids

Are you going to stock up on the Halo again, or was that a bust? I'd rather get everything from you, but if you're not going to restock I guess I'll go back to the source.

Yeah, whut she said. There are 'some" Halo flavors that I will buy in 15ml sizes now.

 

[gormly]

The only thing I want right now are the fc-2000 ceramic wicks. So, I'm good.

keep an eye out on the site tonight then and you'd better click refresh a lot...I only received a portion of my order due to them telling me the most important size had a lot come in too small.

I will post here also, but they are here, just need pics and figure out how we are going to pack them.

Re: Liquids

Are you going to stock up on the Halo again, or was that a bust? I'd rather get everything from you, but if you're not going to restock I guess I'll go back to the source.

I will be doing it again but only at the larger sizes, the smaller sizes are (almost) profitless and they sit here for a while so it's hard to have funds tied up, the larger sizes, although I can't sell them for less than their MSRP I can make something on.
soon I think.

Re: Haze

What if you just mix the flavoring used in Haze into dropper bottles and sell that without telling us what's in it? Then we could just add it to the nic base of our choice and you would save a lot of time but still make money.
I'm rotating mine with some other juices to make it last but it's still my favorite and the only stuff I ever "chain" vape.

good idea I will think about it.

 

[ratpack7]

got my order in for ceramic wicks

 

[gormly]

Ceramic Wicks are here for those interested

I am packing these in spare CE5 tubes I have so they do not get damaged in shipping. You can order a max of two sets.
If you order two sets all 6 pieces will be in the same tube.

3/32 size:
From what I have been able to summize this one will fit every rebuildable atomizer I sell currently. If you have purchased a rebuildable that can utilize mesh from DiscountVapers, this one will fit.
Please do not email me asking if this will fit, check the hole on your rebuildable if it is 3/32 or larger it will fit

These do not fit the drippers like the Phoenix, I am sure someone can figure it out but they are not specifically made for this.

1/8 size:
This size does not seem to fit any product I have it is too thick, if you have purchased a rebuildable from me, this will NOT fit, you need the smaller size 3/32. Please measure the hole you have to make sure this will fit your device, if your hole is smaller than 1/8th it will not fit. Please do not message me asking if it will fit what you have, if it is not from my store I will not know

My disclaimer for this item:
This product is fragile and cannot handle sheer forces, makes sure you handle this with care. Due to the nature of this product there are no refunds or exchanges.

This includes breakage in shipping, it is far too easy for someone to break one and tell me it came to them broken, if you are not willing to take the risk, do not buy this item.
We are shipping these in CE4/CE5 clearomizer tubes that we have extra of and wrapping them in bubble, in the entire time I have sold vape gear I have had one tube break in shipping because a postal worker decide to stomp on it. I have had a fair amount "crack" but only one outright break. This is the best option I have right now, I am going to try to get some small tube bottles for the future. I am saying this ahead of time, sending me a picture of a broken tube will not be proof they were broken in shipping, I am doing my best to make sure they are shipped properly. You all know me, you know I am fair, but in this case.. this is too new and they are too few in supply.

I wrapped one up, threw it around, dropped a box on it and did everything short of stomp on the package. They were still intact.

This policy may change in the near future as this item gains popularity and volume. For now consider this an experimental purchase.
Please report your experiences by leaving a review.

I will post more when I know more, I asked LD to investigate the sizes, but I need to move onto other things I am sure he has a boat load of things to do, but if I learn anymore I will post it. As of right now I am not sure what the 1/8ths will fit.

 

[philly1234]

I'm cool with getting larger sizes...I would imagine most people who buy Halo from you already know what they like and will buy a big bottle. I like Belgian Cocoa and Tribeca

 

[wolandepiphanius]

Thanks Eric! I just put in an order for the ceramic wicks!!! Finally. You're the best!

Oh, by the way, ship out my order first . Just kidding.

 

[calpis]

Just ordered my ceramic too!

 

[calpis]

Just realized that I can finally close that chrome tab that was keeping watch over the FC2000 page for over 2 weeks now.

 

[Dieseler]

Eric i ordered from you 1 set of the ceramic 1/8th wicks. These i can say for sure fit the real DID made in Greece as i have several and the 1/8th drill but fits in its wick hole with a small amount of wiggle room .

The did clones and the aga rebuildables 1/8th will not fit at all simply too big for those.

Im surprised you still have some available in 1/8th size with all the mention of these type of wicks on the forum , when i get my set they will get a good workout to test and if i feel it performs better that my 500 mesh i will order more in the future when you have more stock.

 

[sparky parker]

The second set of numbers in the battery number ("350" and "490") refer to the length of the battery. The "18" is the width.

Therefore, it is impossible for an 18490 to function as a 18350.

There could be a case where you could use an 18490 in place of an 18350 IF the spring would compress enough to accommodate the additional 140 mm.

RodeoGeorge

Rodeo, the way i understand battery markings 18 is width, 49 or 35 is length (not counting nipple), and 0 is for a round battery, 14mm difference.
still alot of differance, i dont see them being interchangable, i would guess they ment 18500 1mm differance.

just a guess

 

[WA3PNT]

Rodeo, the way i understand battery markings 18 is width, 49 or 35 is length (not counting nipple), and 0 is for a round battery, 14mm difference.
still alot of differance, i dont see them being interchangable, i would guess they ment 18500 1mm differance.

just a guess

I stand corrected. You are absolutely correct. That's what happens when a 70 year old brain is engaged. LOL

Thanks for the correction.

RodeoGeorge

 

[beebopnjazz]

I think I'm gonna cry - ceramic wicks sold out

I missed it - been dealing with a sick doggie....was at the vet again last night...and missed their limited arrival

Hey you guys...do all gennies leak if laying down? I have some chids....if I put the fill screw back in do they still leak?

BTW, at Christmas I had ordered the Vision Eternities from Eric - just awesome - no problems yet. I don't see them on the site anymore.....did Eric stop carrying them?

 

[Tully Mars]

I have already ordered so this is just a question. Are the Artemas tanks gone for good? It looked like they were going to be THE NEXT BIG TANK THING, now, vanished. I bought two and haven't had the chance to try them yet. I even ordered the cones for them. I picked up a couple more just in case and now I can only find them on a couple other sites and out of stock is the usual amount on hand. I just want to know if I missed something and they turned out to be yesterday's news before they got their 15 minutes. I will try mine next week and see for myself. If they are as good as I imagined and they are coming back that would be good. If I like them and everybody drops them, I have 4 and will search for more, it won't be the first time I have had to hoard something.

I am glad to see the iClear 16 & 30 for sure. The 16 ranks up there with ViVi Nova's and I have High Hopes for the 30.

 

[gormly]

Ok, CRAZY night for sure....

all wicks gone in like an hour or something.
More coming no ETA, please do not waste and email asking I will post with details when I get them.
sorry folks I am at the mercy of the makers on this one. waiting for word on manufacturing capabilities.

Thanks for the tip on the 1/8 size fitting original did.. good to know