- Status
From goldengreek.co.uk. I've sent them an email, and their response was:
"Our store is connected to Paypal in the UK so we operate/charge in £GBP. On Wednesday night the exchange rate was, £1 = 1.265 Euros. I Have looked at your transaction on Paypal, we have received, £139.59. So: 139.59 x 1.265 = 176.58 Euros
Postage with Extra insurance is 16 about Euros, so actual charge for GG minus postage is around 160 Euros. Sometimes, the Zencart does not update the exchange rate quickly enough, so it is a little misleading. However the amount deducted by Paypal is the actual rate/amount that you are paying
Also, Paypal may be charging you extra to do a currency conversion. Hope that all makes sense, let me know if you need any further info."
My total was: 170,24 euro for GGTS and 16,16 euro for shipping = 186,39 euro
Last edited:
you did very well babo that you send this e-mail to the seller. All people have to do that everytime they see something like this. 
Good morning Imeo! what are you doing in here?
Weren't you supposed to be in shorts, drinking margaritas and enjoying the sun, the beach and the company of your family?
Weren't you supposed to be in shorts, drinking margaritas and enjoying the sun, the beach and the company of your family?
I went for 3 days to a hotel, then another 5 days and thats it Ariel. Now its time for work axaxaxa
Good morning Imeo! what are you doing in here?
Weren't you supposed to be in shorts, drinking margaritas and enjoying the sun, the beach and the company of your family?
ask Greek seller if he still has some Babo. If he doesnt then you have to wait for the next GG stuff preorder
Dear Imeo,
We have just a wonderful GG Wiki and I was thinking is there any possibility to add production month/year for initial SSGGTS and GGStealth batches? For example SSGGTS #2500 - 3000 made 7/2012
It would be quite interesting to check when my SSGGTS is made... you know, I would like to arrange birthday parties etc. for her.
We have just a wonderful GG Wiki and I was thinking is there any possibility to add production month/year for initial SSGGTS and GGStealth batches? For example SSGGTS #2500 - 3000 made 7/2012
It would be quite interesting to check when my SSGGTS is made... you know, I would like to arrange birthday parties etc. for her.
To further extend that idea, Ariel and me were thinking about some kind of virtual GG museeum, so historical input is appreciated!
Great idea Manni!!
check this please:
GGGrant (button from stores, no lock, the first wireless device in e-cig history)
GGGGrant (button that had a problem with firing when a metal surface was touching button and body, no lock)
GGGrant with almost the same as the present GGTS button
GG nano (1xcr123 battery), GGTS button style
GG super nano (1xcr2 battery), GGTS button style
GGSlim (no locking button)
GGSlim with a side button (I made 2 pieces only, no locking button)
GGSlim with locking button
GGSuperslim (one single tube that takes 2x10440 batteries for 7,4 volt vaping)
GGSlim connector to connect 2 regular slims together and make a slim for 7,4 volts vaping)
GGTransformer (it takes almost all batteries, tube with sections)
GGTS (2 prototypes with the ability to move the button in 3 places)
GGTS (1 prototype that had the ability to move the button in 4 places: front, side, near atomizer and front again but it could made unit 20mm smaller)
GGTS with the 4 in 1 cap (no CT, no CR, bottom cap with front venting holes)
GGTS with CT and CR (bottom cap with side visible holes)
GGTS (present)
GGTB (present)
AFS1 beta ( tube with a cap, the first use of o-rings in e-cig history, holding atomizer with a laser hole on its tube near the bridge)
AFS1 [tube with 4 caps (2 per each side), holding a lasered atomizer like the AFS beta]
AFS (air control but different than UFS)
AVS
AFSV3 (like AVS2 but made for all mods)
UFS (present)
check this please:
GGGrant (button from stores, no lock, the first wireless device in e-cig history)
GGGGrant (button that had a problem with firing when a metal surface was touching button and body, no lock)
GGGrant with almost the same as the present GGTS button
GG nano (1xcr123 battery), GGTS button style
GG super nano (1xcr2 battery), GGTS button style
GGSlim (no locking button)
GGSlim with a side button (I made 2 pieces only, no locking button)
GGSlim with locking button
GGSuperslim (one single tube that takes 2x10440 batteries for 7,4 volt vaping)
GGSlim connector to connect 2 regular slims together and make a slim for 7,4 volts vaping)
GGTransformer (it takes almost all batteries, tube with sections)
GGTS (2 prototypes with the ability to move the button in 3 places)
GGTS (1 prototype that had the ability to move the button in 4 places: front, side, near atomizer and front again but it could made unit 20mm smaller)
GGTS with the 4 in 1 cap (no CT, no CR, bottom cap with front venting holes)
GGTS with CT and CR (bottom cap with side visible holes)
GGTS (present)
GGTB (present)
AFS1 beta ( tube with a cap, the first use of o-rings in e-cig history, holding atomizer with a laser hole on its tube near the bridge)
AFS1 [tube with 4 caps (2 per each side), holding a lasered atomizer like the AFS beta]
AFS (air control but different than UFS)
AVS
AFSV3 (like AVS2 but made for all mods)
UFS (present)
Last edited:
yes!! I forgot it jager, thanks a lot buddy
I will correct my previous post now
I will correct my previous post now
dear Imeo can you help me to better understand the production and distribution program of your products?
as i understand it should arrive in september proteus, then there will be ggts and ufs, then we will have the opportunity to preorder for embroidery odysseus and expansion kit as well as a special edition of iatty, it's all right?
i kindly ask you confirmation because the desire to have your inventions is so much and, unfortunately, the jackals in the market ecf are always present and are trying to resell items consumed, used, while in principle i want to buy only original and new items from your dealer, i will not pay the overprice for objects placed in the mouth by others.
you can confirm that there will be a pre-orders for all the new material GG? as the basis for ggts odysseus? many have bought ggts and odysseus but they does not have the base, very sad..
thank imeo
as i understand it should arrive in september proteus, then there will be ggts and ufs, then we will have the opportunity to preorder for embroidery odysseus and expansion kit as well as a special edition of iatty, it's all right?
i kindly ask you confirmation because the desire to have your inventions is so much and, unfortunately, the jackals in the market ecf are always present and are trying to resell items consumed, used, while in principle i want to buy only original and new items from your dealer, i will not pay the overprice for objects placed in the mouth by others.
you can confirm that there will be a pre-orders for all the new material GG? as the basis for ggts odysseus? many have bought ggts and odysseus but they does not have the base, very sad..
thank imeo
I will start Ody's GGTS bases in about 10 days bot. As for the rest of GG items that you need, I will make all of them after the GGTS-UFS batch that I am making right now
uhm will u have them on presale aswell when ody presale comes? ... this is a rly important item for ggts/ody. ggts base is a rare item allready.. they sell them for 60 euro on auction. i think its one of the most missing parts. Pretty sure its sold out in 5 mins something :/.
Last edited:
Imeo,
I dont know if you are aware, but because of the TS presale, the prices in the classified section have come down to within reasonable limits. Thank you for taking control of your products back.
I dont know if you are aware, but because of the TS presale, the prices in the classified section have come down to within reasonable limits. Thank you for taking control of your products back.
I will make them now and I will make them again when Ody presales will start D3.
- Status
