Official GG Production Status

[Scott_Simpson]

I've been wanting a brass GGTS Top Tube and I'm kicking myself for not picking one up when COV still had them in stock a couple of weeks ago! I now notice that COV doesn't even list the brass GGTS Top Tube as a "Notify Me" option ... does this mean that the brass GGTS Top Tube is no longer being made? I've signed up for notification on the stainless steel GGTS Top Tube, but I'd really prefer a brass one.

 

[c8h10n4o2x2]

I have dropped one of my Penelope ceramic center nut's in my carpet and can not find it. Even with a BIG NUT MAGNET .
If someone has an extra, I have many spare parts(brass button caps, brass springs, o rings, ceramics, brass axis posts, brass screws for buttons and switch etc. for the GG devices. Does anyone know where I might find a nut? Penelope nut store?

Imeo, would the old or new Ithaka center nuts work? Or are any of the other attys the same? I guess I could try but, I am very ocd about having the right parts for the right devices.
I also would love to find a couple sets of magnets, does anyone know where I might find these also?

Did not know where else to put this...
Thanks Imeo and everyone!

Just took my Pene apart, The thread sizes are the same in the Pene, Ody, and Ithaka. The big nut on the Ithaka is to big to fit inside the Pene's ceramic but the new little one will work, or if you have one from an Ody.

Hope this helps

 

[Idaholandho]

I've been wanting a brass GGTS Top Tube and I'm kicking myself for not picking one up when COV still had them in stock a couple of weeks ago! I now notice that COV doesn't even list the brass GGTS Top Tube as a "Notify Me" option ... does this mean that the brass GGTS Top Tube is no longer being made? I've signed up for notification on the stainless steel GGTS Top Tube, but I'd really prefer a brass one.

They have made the Unicorn list my friend. I do not think that they will be made in the near future. Many are looking for them as they are one of the fastest selling parts.

 

[Ariel_MX]

I have dropped one of my Penelope ceramic center nut's in my carpet and can not find it. Even with a BIG NUT MAGNET .
If someone has an extra, I have many spare parts(brass button caps, brass springs, o rings, ceramics, brass axis posts, brass screws for buttons and switch etc. for the GG devices. Does anyone know where I might find a nut? Penelope nut store?

Imeo, would the old or new Ithaka center nuts work? Or are any of the other attys the same? I guess I could try but, I am very ocd about having the right parts for the right devices.
I also would love to find a couple sets of magnets, does anyone know where I might find these also?

Did not know where else to put this...
Thanks Imeo and everyone!

Is it the "Penelope Center Post Top Nut"? (e-smokeguru has it in stock):

THE GOLDEN GREEK MODS :: Penelope Accessories :: Penelope Center Post Top Nut - e-smokeguru

 

[Idaholandho]

Is it the "Penelope Center Post Top Nut"? (e-smokeguru has it in stock):

THE GOLDEN GREEK MODS :: Penelope Accessories :: Penelope Center Post Top Nut - e-smokeguru

Hey Buddy! I am not sure how I missed this. I order quite a bit from Vasilis and just received my last. I did not know he sold these. I need to pay attention, Thank you so much Ariel.

Thankfully we have such a good family and villarino1 is sending me an extra nut that he had.

 

[villarino1k]

Should be in your hands I'm guessing sometime this week Idaho

 

[Aal_]

Imeo when do you think we can see Proteus, and when are you starting with parts pre order. Now that you showed us justGG you must be free for other things

 

[imeothanasis]

I am not really free buddy, I am working on new Penelope now and on some other things that I cant announce them. But Proteus is ready, they only I need now is to make the samples to test them, something that will be done in about 1 month I hope

 

[jjkanto]

Hurray Imeo! I know a lot of people have been waiting for Proteus! If the Penelope was designed especially for Proteus, I guess I need both! You work too hard Imeo! I guess that's not so bad if you love what you do!

 

[imeothanasis]

not bad at all jj!!!

 

[jjkanto]

Good for you Imeo. You are lucky to have a job that you live and enjoy. I'm sure everyone wishes they were so lucky!

 

[imeothanasis]

I know jj. Thats what I wanted from when I was young. I manage to do it at 40 years old. Now I am really happy!

I wish to all people to have a job they like one day.

 

[jjkanto]

I am really happy for you! And will be really happy to have the first of what I hope will be a whole collection of GG's!

 

[Electraglide1]

I think after the Just GG orders ship that you should take time to relax with the ones that peek around the corner in your videos. All of you deserve a break. Thanks for your effort to get these out.

 

[Idaholandho]

Oh, Brother Imeo, I have told you that 3-4 hours of sleep is not enough. We need you healthy. Sleep, eat, and be healthy .....this way you can drink less Nescafe and more beer!

 

[imeothanasis]

Beer will give me some kilos and I am on a diet Idaho!

Thanks a lot guys for your nice words. But I sleep as much as I need, I am more than ok, no worries

 

[TwilightMagester]

Sorry to bother Imeo, Some few pages back I saw that you were thinking about doing pre-orders for the GGTS again in about a month (from that post) which should be right about now. After seeing my friend's GGTS and reading all of these posts on ECF, I'm really itching to get my hands on one. Any idea when/who will have them for pre-order?

Thanks!

 

[imeothanasis]

I will start preorders for all GG items when justGG batch will be send to my sellers twilight

 

[Idaholandho]

VVGG next? No? or after all GG preorders?

 

[xtreme101]

After seeing my friend's GGTS and reading all of these posts on ECF, I'm really itching to get my hands on one.

After that you'll be itchin another