Official ProVari 3 Thread - P3 *PART 2*

[jwbnyc]

One Tin Foil Hat for me, Please...

 

[ravnhaus]

Almost ordered another P3 earlier today. Stopped myself at the last second. Log on later... new Provari out. Order sent. Love the design and could not resist the hype. Last one... really!

 

[Enta]

 

[ENAUD]

You're gonna laugh....

2.0 at 3.5v is my sweet spot.

I ain't laughin', I'm right there with you when I am using my ProTank 2's. On them I like the 2.2Ω coils at 3.5-3.7V I just filled one up and fired it up tonight The other settings I stated are the range that I have found to work for me with the Aspire Nautilus and Aspire BVC coils in my CeroTanks and Kanger Subtank mini with the Aspire little BVC coils in them.

 

[ENAUD]

LOL, LOL, I really really like this cat GIF. It makes me happy every single time I see it!

 

[Katdarling]

<-------- TPuffer, at yer service.

I like the spring-less end cap. The design on the tube is pretty too.

High watts, low ohms......... My poor tootle puffin' self is being left behind.

More tootle puffin' love!!! Yes!!

I've found I prefer my coils to be 2.0 or higher. I like a cooler vape and I like the longevity of the battery at that range.

We need hats!

No hats, but we've got one fish left if you'd like it.

 

[scotdc]

That is a nice design on the Procyon. Clean, simple and quite appealing in my opinion. 50W at only $10 more than a P3? Hmmm.... could there be a price drop for the P3 on the horizon? I may have to start saving up for that inevitable Mother's Day sale.

 

[DarkZ]

not sure if this has been discussed already since the Procyon is out, but will our P3 users get a 50W upgrade? maybe a new battery cap too?

 

[Vape360]

not sure if this has been discussed already since the Procyon is out, but will our P3 users get a 50W upgrade? maybe a new battery cap too?

The Procyon is a different PCB, so we cannot upgrade software on the P3 to match.

 

[DarkZ]

The Procyon is a different PCB, so we cannot upgrade software on the P3 to match.

Perhaps provape could offer a hardware upgrade for the P3 users?

 

[Vape360]

Perhaps provape could offer a hardware upgrade for the P3 users?

I'll look into that.

 

[DarkZ]

I'll look into that.

 

[ScandaLeX]

I'm BLESSED!

 

[gnees]

I'm BLESSED!

I always thought that!

 

[rbrylawski]

I'm BLESSED!

Blessed indeed! Congratulations!

 

[MsLoud]

Gorgeous Lexi!

 

[ScandaLeX]

I discovered the P3 uses flat & button top batteries!!!! I'm so excited!!!![emoji38]

!!! G*NOTE FIVE !!!

 

[ScandaLeX]

OK a P3 question ~

Just installed a fully fresh '350 battery. The P3 is reading it at 62% battery remaining. Does that mean the battery is no good?

!!! G*NOTE FIVE !!!

 

[BreSha6869]

OK a P3 question ~

Just installed a fully fresh '350 battery. The P3 is reading it at 62% battery remaining. Does that mean the battery is no good?

!!! G*NOTE FIVE !!!

Your P3 is broked and could be dangerous. Send it to me for proper disposal.

Is the battery "new" or used but freshly charged? Did you check the IQ?

 

[The Ocelot]

OK a P3 question ~

Just installed a fully fresh '350 battery. The P3 is reading it at 62% battery remaining. Does that mean the battery is no good?

!!! G*NOTE FIVE !!!

The battery level on my P3 has always been wonky, even with brand new batteries. Try cleaning the contacts and messing with the spring (sometimes twisting or pushing works as well as pulling) to see if that changes the reading.

ETA: I just put in a fresh battery and it read 78%. I wiped off the contact with an eraser (the cat is on my lap and it would annoy her if I tried to reach the bottle of isopro), wiped the ends of the battery, then pulled and twisted the spring a little. It now reads 86%.