Official ProVari 3 Thread - P3

[brickfollett]

I'll be using vtc5's in mine abs aw for smaller batteries

 

[jwbnyc]

I must agree with you on all counts. Satin Silver and my Silo is the best Clearo - EVER! I use BVC coils and for reasons unknown to me, it doesn't burn juice as fast as my Nautilus full size, yet it produces gobs of vapor and tastes as great, if not better than my Nauty...........

They go through less juice because they are single coil versus dual coil.

 

[Littlewing]

OK, I searched and haven't come across anything concrete... just speculation... Will the Z atty Pro fit the P3?

If not, them I am out of the market for a P3, seeing that I have 3 Atty's. That's would be crappy, considering that all were purchased thru Provape and the hot boost feature is what most interests me...

 

[HBcorpse]

OK, I searched and haven't come across anything concrete... just speculation... Will the Z atty Pro fit the P3?

If not, them I am out of the market for a P3, seeing that I have 3 Atty's. That's would be crappy, considering that all were purchased thru Provape and the hot boost feature is what most interests me...

Any existing atomizer will fit the P3, provided it has a 510 connection.
Edit: This is me, not knowing what I'm talking about...hahahaha sorry.

 

[JohnD0406]

OK, I searched and haven't come across anything concrete... just speculation... Will the Z atty Pro fit the P3?

There were several models made, but if you're talking about the one made for the ProVari, no it will not fit the P3 - it was designed for the v2.5.

I just tried to see if there's any combination that would work, and the only thing that worked was a 510 to eGO adapter, which leaves a 1/4" gap between the atty and the P3 - but, it works...

Maybe the eGO P3 adapter (shown in the beta manual) will allow it to work, but without the part in hand, no way to know.

EDIT - Adding clip:

 

[JohnD0406]

Any existing atomizer will fit the P3, provided it has a 510 connection.

The Z-Atty Pro was designed specifically for the ProVari v2.5 and will not fit the P3 (nor the Ti ProVari).

 

[HBcorpse]

The Z-Atty Pro was designed specifically for the ProVari v2.5 and will not fit the P3 (nor the Ti ProVari).

:hangs head in shame:
I opened my mouth before I realized I had read the OP wrong...
In hindsight, I don't know WHAT the f--k I read, cuz now I can't figure out what I was talking about...cuz I was totally wrong.

 

[Aceman12]

You can just remove the skirt at the bottom of the z atty pro.

 

[rbrylawski]

They go through less juice because they are single coil versus dual coil.

Nope. I'm comparing the full size Nautilus with BVC to the full size Silo on BVC and the Silo uses less juice than than the Nautilus.


Sent from my iPhone using Tapatalk

 

[brickfollett]

There are a couple versions of the Z-atty, the Pro isnt the only one. There's like a Z-atty U (universal) that is a 510 connection without the skirt. Problem solved!

 

[JohnD0406]

There are a couple versions of the Z-atty, the Pro isnt the only one. There's like a Z-atty U (universal) that is a 510 connection without the skirt. Problem solved!

Unless they sell just the bottom part (with the 510 conection), so the Z-Atty Pro can be retrofitted with the standard base, I wouldn't call having to buy 3 new atty's "problem solved" Perhaps if you have deep pockets, but the OP was referring to the Z-Atty Pro, not the U, and it's not removable.

 

[JohnD0406]

You can just remove the skirt at the bottom of the z atty pro.

I looked into this, curious if there was something I've never noticed. Seems at least the version 2 had the skirt glued on (and screwed onto the 510 connector). Looks like if you can break the glue seal and unscrew the skirt, you're left with one hell of a long 510 connector - I doubt that would sit flush on the P3 - it would likely take a mechanical with a lot of adjustment in the positive pin to get it to sit flush. Maybe I'll give it a shot on mine when I get home from work.

This also begs the question, were all versions of the ZAP made the same? Mine's the first version with laser engraving.


http://www.e-cigarette-forum.com/fo...d-gray-colored-skirt-cap-doesnt-match-up.html

http://www.e-cigarette-forum.com/forum/mechmods/333490-show-off-your-caravelas-90.html

 

[brickfollett]

Unless they sell just the bottom part (with the 510 conection), so the Z-Atty Pro can be retrofitted with the standard base, I wouldn't call having to buy 3 new atty's "problem solved" Perhaps if you have deep pockets, but the OP was referring to the Z-Atty Pro, not the U, and it's not removable.

Haha true. Let's call it a possible solution to the problem. I wonder if it would fit if a person only had the inner ring installed and left the outer ring off? Maybe provape will chime in on this one

 

[rondasherrill]

I'm curious if they will offer spare outer rings and 510 rings once the P3 is released. Imagine using a P3 threaded atomizer, and then losing track of those parts... It'd be nice if they offer replacements.

Not to mention I kind of have an idea using those spare parts to build the base for a homemade P3 threaded atomizer...

 

[jwbnyc]

Nope. I'm comparing the full size Nautilus with BVC to the full size Silo on BVC and the Silo uses less juice than than the Nautilus.


Sent from my iPhone using Tapatalk

Oh. Didn't get that.

Wonder why that is?

 

[brickfollett]

Oh. Didn't get that.

Wonder why that is?

Magic =] The Silo is a killer, and it looks fantastic

 

[rbrylawski]

Oh. Didn't get that.

Wonder why that is?

I truly have no idea? I can go two days on a full tank with the Silo, whereas I can't on the Nautilus. And the Silo puts out great vapor, with great taste. Truth be told, I haven't used my Nautilus since I got the Silo. I don't switch flavors, so one tank is really all I need. I just like having a backup in case I break one. The Nautilus has become backup to the Silo. Just like the 2.5 will one day become backup to the P3.

 

[Juggernaut666]

What is this silo you speak of? Link please?

 

[DPLongo22]

What is this silo you speak of? Link please?

It be this:

Beyond Vape Silo Tank Kit [bv-silo-tan-kit] - $35.00 : Beyond Vape, Electronic Cigarettes, Premium Vaporizers, Premium Vaping Products

All who've tried them, that I've seen at least, have sung praises.

 

[Katdarling]

I still have my Evic. The *ONE* thing I hate about the Evic, I mean 'really' hate... If you fully charge the Evic, then turn it off (not sleep mode), then put it in a drawer for 30 days, the battery will be basically dead in need of a charge before use-very lame~!
My ProVari doesn't do that.
My Billet Box doesn't do that.
My iTaste VV3.0 doesn't do that.
My new Eleaf iStick is currently being tested (left on) and so far, 2 weeks in it's looking great.

The point being while Joyetech addressed many complaints of Evic owners and have brought out a serious upgrade, it will never, ever, be able to compare to a ProVape product. Double the money for four times the product? Of course, a no-brainer~! The P3 is not a new version to fix complaints of existing customers, but rather, an evolution of a great product!

And yes, like you, I see zero chance of regretting a P3 purchase. That's why I am ready to buy without waiting for hundreds of posts from satisfied P3 owners.

Oh do I hear you, Peter underscore! My Evic annoyed and then a noid again. What IS the battery doing while in the OFF position that it's no where to be found when one wants to vape it? I have a 'few' devices that suffer that woe.

But speaking of "ByLeo"..... nice work, Leo!

The P3, from what I understand, will accommodate either button top or flat top batteries. My preference is the AW IMR button top batteries. I will be grabbing a couple of the smallest of those since the device will be able to go down to the mini size. I've never even held a mini ProVari before, this will be new for me.

I'm super stoked about this P3!

So I guess our Provi Polished shopping spree is over now?