Even my B&M sells them for $16, but I've ordered them online for as low as $10.95.
Sent from my iPhone using Tapatalk
Official ProVari 3 Thread - P3
- Thread starter Vape360
- Start date
- th_trl_thread_readers 0
- Status
Even my B&M sells them for $16, but I've ordered them online for as low as $10.95.
Sent from my iPhone using Tapatalk
If you're talking about BVC coils they're 5/$9.95 at Evape. They are authentic. Free shipping over $35
I was waiting for the hollowed out glass/steel cage to get back in stock to get more so don't buy them all. Mkay?
http://www.evape.us/nautilus-bvc-replacement-coil/
I was waiting for the hollowed out glass/steel cage to get back in stock to get more so don't buy them all. Mkay?
http://www.evape.us/nautilus-bvc-replacement-coil/
So my p3 arrived today as promised and here's my initial thoughts after a hour or so of playing build quality is obviously outstanding in fact I've been playing with the extension rings since I got it as they are buttery smooth the screen is bright and fluid as in it doesn't hang mid menu (that I've seen yet) like the v2.5 did which i noticed on the 2.5 almost immediately have not had a chance to play with all the settings yet but the boost feature really does work well from first drag ive noticed a nice heat spike which is immediately dropped down to the correct voltage after the screen activates after every drag you take telling you voltage or wattage atomiser ohms and % battery life left which I wasn't aware of and am quite happy about as it saves me menu dropping in regards to how she vapes well she's a provari so what you set is what you get setting it at 4.2 volts gives me exactly the same Vape on my ithaka as it does on my freshly charged mech to say this cost me 20 pounds more then what a standard v2.5 would have its a steal in my eyes only thing left is what tank to put on her if anyone has any recommendations please let me know no genesis atomisers though and this will be my main all day Vape from now on so the tank has to be leakproof I was eyeing up a kayfun but honestly have no idea if there's anything better now thanks
A bunch of posts back there was talk of removing the bottom ring on the ZAP to use w/ the P3. Here's an add on for consideration to convert a Z-Atty-P to a Z-Atty-U, made by Tatroe.
Z-atty Pro Adapter:
Zapa - Z Atty Pro Adaptor
Z-atty Pro Adapter:
Zapa - Z Atty Pro Adaptor
Same here. Aspire makes the Nautilus coils, but so does the maker of the Silo tank. I use the stock Aspire Nautilus BVC 1.8 coils.
Sweet-Vapes seems to have the best prices on the Aspire coils, both plain and Nautilus. I've ordered three times, fast mistake-free service for me each time.
Aspire Nautilus BVC Coils - Aspire Coils - Aspire - Clearomizers Tanks - $10.95 per 5-pack plus shipping.
Sun Vapers has them for $10.99. That's where I got some (authentic) before I found Evape.
Last edited:
Alright Provape, I FINALLY got a build on my Kayfun that's working for me. It's time to put my gorgeous Kayfun and my Silo on the P3! Here's some Kayfun eye candy for all of you. Just envision a satin silver P3 sitting below it =]
Can't wait!
Can't wait!
Awesome m8!!
Hope you are as happy about it as I am. From now on this is the only device I am using, all day every day I use an Aspire Nautilus (5ml) with bvc coils. They are awesome. I also use a kanger aerotank mega, but for some reason that tank seems to gurgle after a short period of usage and the airflow control is just crap. Regardless of the setting the airflow stays the same.Best regards
So am I reading this correctly that if I wait until the Silo bases become available, then I can slap them onto my hollow-sleeve Naughties and roll with that?
Because I love the larger air holes, but I also love my hollows.
Because I love the larger air holes, but I also love my hollows.
Hello.
Hope you all are having a great day so far!
I noticed a couple of pages back that someone quoted the price they had heard from a dealer and I recall it was off by +$10. I wanted to clarify so you all have the correct pricing.
The P3 will retail at $249.95 for the silver and colors will be +$20.00
We also have something new to announce
* New Feature!
The P3 has the capability to have its internal firmware upgraded via an external programmer that we will be offering for sale to participating authorized resellers. This significant NEW capability will allow future planned updates and features to be added over the life of the P3. All P3 units have the capacity to be updated. Existing P3 beta units can also be updated.
We don't yet have a timeline for when the programmers will be going out to resellers, the cost of each update, or which resellers will opt to have the programmers. In the near future we will establish a list of places where you can either send your P3 in for updates, or walk-in for updates. Of course ProVape will also still do updates if you want to send it to us, but this new feature allows you to get updates without having to send the device to us. This will also benefit those in other countries where shipping the unit back to ProVape is more than $5.
Hope you all are having a great day so far!
I noticed a couple of pages back that someone quoted the price they had heard from a dealer and I recall it was off by +$10. I wanted to clarify so you all have the correct pricing.
The P3 will retail at $249.95 for the silver and colors will be +$20.00
We also have something new to announce
* New Feature!
The P3 has the capability to have its internal firmware upgraded via an external programmer that we will be offering for sale to participating authorized resellers. This significant NEW capability will allow future planned updates and features to be added over the life of the P3. All P3 units have the capacity to be updated. Existing P3 beta units can also be updated.
We don't yet have a timeline for when the programmers will be going out to resellers, the cost of each update, or which resellers will opt to have the programmers. In the near future we will establish a list of places where you can either send your P3 in for updates, or walk-in for updates. Of course ProVape will also still do updates if you want to send it to us, but this new feature allows you to get updates without having to send the device to us. This will also benefit those in other countries where shipping the unit back to ProVape is more than $5.
Last edited:
We in other countries need to see it on your website soon.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Hello.
Hope you all are having a great day so far!
I noticed a couple of pages back that someone quoted the price they had heard from a dealer and I recall it was off by +$10. I wanted to clarify so you all have the correct pricing.
The P3 will retail at $249.95 for the silver and colors will be +$20.00
We also have something new to announce
* New Feature!
The P3 has the capability to have its internal firmware upgraded via an external programmer that we will be offering for sale to participating authorized resellers. This significant NEW capability will allow future planned updates and features to be added over the life of the P3. All P3 units have the capacity to be updated. Existing P3 beta units can also be updated.
We don't yet have a timeline for when the programmers will be going out to resellers, the cost of each update, or which resellers will opt to have the programmers. In the near future we will establish a list of places where you can either send your P3 in for updates, or walk-in for updates. Of course ProVape will also still do updates if you want to send it to us, but this new feature allows you to get updates without having to send the device to us. This will also benefit those in other countries where shipping the unit back to ProVape is more than $5.
Yay! I was wondering how updates would be handled on something like this.
Countdown to firmware hackers raising the amp and watt limits in 3..2..
Yay! I was wondering how updates would be handled on something like this.
Countdown to firmware hackers raising the amp and watt limits in 3..2..
Nearly Impossible. You didn't think we were going to make that easy did you
Last edited:
We'll see... I got my hex editor all fired up and ready.Nearly Impossible. You didn't think we were going to make that easy did you
Just kidding. I vape at like 12 watts, so it's neither here nor there for me, but with all the haters, I imagine some will at least try.
Yay for including the beta in that as well [emoji1]. Now let's hope a Dutch dealer will do it [emoji5]️
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Status
Similar threads
- Locked
