Official ProVari 3 Thread - P3

[rbrylawski]

IQ just went past 100, the vape is sweeter, the clouds are thicker.....

Well thanks for that. I wasn't going to get one. Then you went and posted this picture and I start wondering what on earth I'd do if I accidentally lost my stock P3 bottom cap. You know, as in it just disappeared? So darn you. I just ordered one. Yes I did. Whew, now I won't have to lose sleep about losing the stock bottom cap.

 

[AstroTurf]

Not sure how much of an advantage to the recall feature there is. I mean most of the things it remembers is kind of useless. Scroll speed, color, brightness, etc.. Those tend to stay the same across the board...for me anyway. The most important factor is watts. Not sure adjusting watts each time I put a new topper on is any more work than calling up the program I stored it on.

Exactly!!!

 

[NicoHolic]

Our P3's are less than a week old and No Ox gets more press.

Well, I'm still playing with my P3. Went through 2 ml of juice at 1.6Ω/10.0W/4.0V/2B and took the 1600 mAH 18650 down to 53%. Workin' on seeing where it falls at the end of 4 ml.

Edit FWIW, it's about 58 ring gauge. With a 45 mm atty/tank and 15 mm drip tip, right at 7-1/8"… an 1/8" over Churchill length.

 

[AstroTurf]

IQ just went past 100, the vape is sweeter, the clouds are thicker.....

Geez, Whats next?

Caps that say: Have a Vape with Jim!

 

[Robino1]

Our P3's are less than a week old and No Ox gets more press.

It's just because we are all giddy with joy over finally getting our P3's after waiting for such a long time!
We are gettin' silly happy.

 

[Mtek]

Geez, Whats next?

Caps that say: Have a Vape with Jim!

That one will be the Ti cap.

 

[Bronze]

Exactly!!!

OK, glad I mentioned it. Feels better to know I'm not alone. I mean, even if I had five different toppers all with different power preferences, it would be the same effort to remember what power level I like each one than it is to remember the program I stored it on. Right?

 

[Bronze]

Well, I'm still playing with my P3. Went through 2 ml of juice at 1.6Ω/10.0W/4.0V/2B and took the 1600 mAH 18650 down to 53%. Workin' on seeing where it falls at the end of 4 ml.

Edit FWIW, it's about 58 ring gauge. With a 45 mm atty/tank and 15 mm drip tip, right at 7-1/8"… an 1/8" over Churchill length.

My IQ on my current battery is 78. Prior, it was always 93+. It's freshly charged.

 

[Bronze]

It's just because we are all giddy with joy over finally getting our P3's after waiting for such a long time!
We are gettin' silly happy.

That's the ticket!

 

[AstroTurf]

My IQ on my current battery is 78. Prior, it was always 93+. It's freshly charged.

Maybe you need some... Gre

Nope, Not gonna say it.

 

[Bronze]

Maybe you need some... Gre

Nope, Not gonna say it.

I don't want to have to store it.

 

[AstroTurf]

OK, glad I mentioned it. Feels better to know I'm not alone. I mean, even if I had five different toppers all with different power preferences, it would be the same effort to remember what power level I like each one than it is to remember the program I stored it on. Right?

I find that the most I adjust is watts, and that is only a small adjustment either up or down.

For everything...

 

[Bronze]

I find that the most I adjust is watts, and that is only a small adjustment either up or down.

For everything...

Me too. Recall would be a nice feature in special circumstances I suppose. Just don't ask me what they are.

 

[NicoHolic]

My IQ on my current battery is 78. Prior, it was always 93+. It's freshly charged.

Try loosening and retightening the extension tubes and end cap. Might want to wipe off the battery contacts in case you got something on them.

 

[Bronze]

Try loosening and retightening the extension tubes and end cap. Might want to wipe off the battery contacts in case you got something on them.

LOL! I did that three times and it only changed a point or two. Just tried it again after reading your suggestion and it popped up to 95. You have special powers.

 

[Bronze]

I think of all the new features on the P3, the addition of VW and boost rank up near the top of the list. I do like the new top as well. besides eliminating that bevel (and the cheesy beauty rings that we added), it's also very functional with a replaceable 510 and the upcoming hybrid thread. Never liked that skinny little 510. Hopefully the hybrid thread takes off and becomes a new standard that eliminates the 510.

 

[dhaiken]

Not just hype, this does look a lot better in person. The cuts are sharp, looks like a freshly minted coin on the end of your p3, it's nice and you will all be pleased.

There is a lot of freshly minted coins in my P3 and accessories. ;-}

 

[Bassnorma]

Honestly. for me variable wattage is OK. Some of my other mods only do Watts and one is a mech and there is no control there. It is cool to have both in one mod. Because I like seeing at a glance the voltage at a certain wattage. It beats typing it into a calculator...lol...I am starting to know by heart how many volts I am getting at 11 watts, 15 etc...

 

[rbrylawski]

I don't want to have to store it.

But after 5+ pages on how to store the blasted stuff, we've got it all sorted, so you now know how to do it the collectively decided "Official Provari 3 Thread" with pictures no less, way to store it!

 

[dhaiken]

Our P3's are less than a week old and No Ox gets more press.

You can only say "It Just Works" so many times without being annoying.