Official ProVari 3 Thread - P3

[Bronze]

Just as I posted 2 just shipped notices arrived. One from Provape and the other from Vaperev. Need to send wife out shopping one day next week.

Ping, you should know by now that will not work. Wives make it their life mission to know everything we do. Honestly, have you ever gotten away with anything? If you answer yes, think again. They know EVERYTHING!!!

DP, clear off the futon again!

 

[Peter_C]

I'm using the SubTank at 20W on my P3. It's been discussed before, but are you using low wattage and a tight draw? This tank was meant for higher power than a lot of people on this thread typically use. Just like many other tanks, if you're sucking in more juice than you're burning off, the juice has to go somewhere...

Thank you for thinking of me~! I vape a 50/50 juice at 12 watts, but with the air draw wide open (I love an airy draw) and take lung hits. My hands are currently too wonky to try to fix anything, so the subtank is sitting 1/4 in a dixie cup slowly leaking from both the top and bottom seals. The Subtank Mini is bout half full sitting in a dixie cup, not leaking (cup is dry), but is wet around the seams of the piece that turns around the airholes (vapes perfectly fine, no gurgles or anything) - just wet, and bugs me.

So, I am currently stuck using my Silo (heh-used to be my favorite), until I heal enough to change out the seals on the Subtank. I guess in a week or three I will blow another $40 bucks and buy a second Subtank mini hoping it does not do the same thing (as I know of no fix for the Mini).

/grumble

Can anyone suggest a tank that is as airy as the Subtank, that is not sub-ohm, and you don't have to make coils for?

 

[Pinggolfer]

Not sure I understand your question. These bottles just have a blunt needle on top. Fill the bottle and squirt the juice out the needle. No syringe involved at all.

It must be me. You had a link to the bottle and one for the needle. I should have not mentioned syringe. I'm good.

 

[Pinggolfer]

Ping, you should know by now that will not work. Wives make it their life mission to know everything we do. Honestly, have you ever gotten away with anything? If you answer yes, think again. They know EVERYTHING!!!

DP, clear off the futon again!

Lets see. Married 46 years and i'm batting zero with getting away with anything. I will continue to try though.

I'll be heading back to DP's infamous futon.

 

[LittleBird]

I'm trying to contact ProVape to exchange the blue P3. Not quite what I was expecting. Anyway, "Contact Us" takes me to the Help Desk page, and I'm not seeing an option to contact for a return/exchange. Anyone know how to do that?

ETA: Found it. My eyes aren't quite as good as they once were

 

[HBcorpse]

I usually bring 2 Provaris in 18350 size sporting nano Kayfuns when I go out ... I always stick to the backup rule, even though I've never had one stop working.

This is my every day carry (EDC):

Minus the cat (Clyde) of course...

 

[HBcorpse]

I used the k-nano kit from mod factory. Hoping a Kayfun V4 light or nano gets released soon.

SteamTuners already has a Kayfun V4 Nano chimney available...it makes the overall assembly (KF4 + P3) about as tall as having a KFL on the P3. So it definitely takes a nice chunk out of the height.

I used to use syringe, but it was a pita to travel with. Ended up just pressing the dropper right up to the hole and filling directly. Much faster.

This is the type of bottle I use to fill my KFLs with. Works like a charm!

There is also an awesome tool from Cloud9...essentially makes your Kayfun work like a Nautilus, in regards to filling and changing coil/wick.
http://www.cloud9vaping.co.uk/epage...bjectPath=/Shops/yxve46fvrnud/Products/KAYFIL
I promote the heck out of this thing, because I own it, use it, and love it!!!

 

[Bronze]

HB, I do better with those tips than I do the rounded ones. Sadly, I have only two of those around and neither one fits good around the bottles I use. I have 7,000 billion of the rounded tips.

 

[Pinggolfer]

I'm trying to contact ProVape to exchange the blue P3. Not quite what I was expecting. Anyway, "Contact Us" takes me to the Help Desk page, and I'm not seeing an option to contact for a return/exchange. Anyone know how to do that?

ETA: Found it. My eyes aren't quite as good as they once were

What's not to your liking?

 

[Bronze]

Ping, they have 20 eyes...all x-ray capable with night vision. They hide most of them under their hair so we don't know. They have 10 ears with amplifiers in them. And their skin pores are really olfactory nerves. Then add they can read minds if our faces don't tip them off first. It's useless to try to hide anything from them.

Better get packing!

 

[Pinggolfer]

HB, I do better with those tips than I do the rounded ones. Sadly, I have only two of those around and neither one fits good around the bottles I use. I have 7,000 billion of the rounded tips.

Have you heard of recycling???

 

[Bronze]

Have you heard of recycling???

View attachment 424379

We recycle everything here. But I know as soon as I toss those bottles someone will want them.

 

[copperpot]

I'm trying to contact ProVape to exchange the blue P3. Not quite what I was expecting.

The color is in no way like that shown on the provape webpage. It also changes color based on lighting. Is it the color or texture, or what?

SteamTuners already has a Kayfun V4 Nano chimney available...it makes the overall assembly (KF4 + P3) about as tall as having a KFL on the P3. So it definitely takes a nice chunk out of the height.

Thanks HB, I'm heading over to check it out now!

 

[Mowgli]

Thank you for thinking of me~! I vape a 50/50 juice at 12 watts, but with the air draw wide open (I love an airy draw) and take lung hits. My hands are currently too wonky to try to fix anything, so the subtank is sitting 1/4 in a dixie cup slowly leaking from both the top and bottom seals. The Subtank Mini is bout half full sitting in a dixie cup, not leaking (cup is dry), but is wet around the seams of the piece that turns around the airholes (vapes perfectly fine, no gurgles or anything) - just wet, and bugs me.

So, I am currently stuck using my Silo (heh-used to be my favorite), until I heal enough to change out the seals on the Subtank. I guess in a week or three I will blow another $40 bucks and buy a second Subtank mini hoping it does not do the same thing (as I know of no fix for the Mini).

/grumble

Can anyone suggest a tank that is as airy as the Subtank, that is not sub-ohm, and you don't have to make coils for?

StM but 5 sets of o-rings & free shipping for $33

SUBTANK Mini + 5 Color O-Ring Set from www.evape.us

 

[raitizz]

I have this one 18350 battery in the P3. It has lasted me a week and still has 7%.


R

 

[copperpot]

I have this one 18350 battery in the P3. It has lasted me a week and still has 7%.


R

What?? How can that be? This battery must be turned over to scientists to study and replicate..

 

[raitizz]

What?? How can that be? This battery must be turned over to scientists to study and replicate..

I know! Right? (in a girl's voice)

R

 

[DPLongo22]

I have this one 18350 battery in the P3. It has lasted me a week and still has 7%.


R

Raitizz - you do know that you're supposed to vape that thing, yes?

 

[raitizz]

Raitizz - you do know that you're supposed to vape that thing, yes?

Probably..
Somehow the 18650 from my squonker have to be charged every day.
Weird stuff...

I know, the P3 is still fine.

R

 

[rbrylawski]

What?? How can that be? This battery must be turned over to scientists to study and replicate..

In thousands of years, there will be a holiday in honor of this mythical and magical battery. I can see it, yes I can and in honor of it's magic, they'll light a candle every night for 7 nights. Why yes, that's it, it will be henceforth called Batternuka! Gifts will be exchanged each day of the festival of Batternuka and the faithful will congregate together or in their homes while singing songs to commemorate such a mystical event. Yes they will!