Official ProVari 3 Thread - P3

Status
Not open for further replies.

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
Not much difference between 17W +2 boost and 20W. Just a bit stronger.
It took about 2 minutes to update my three P3s.
Outstanding job.
Now I'll need some privacy to play with my puff counter :evil:

11170311_1643536892543801_3634128961445736962_o.jpg
 

Robino1

Resting in Peace
ECF Veteran
Sep 7, 2012
27,447
110,404
Treasure Coast, Florida
It's Friday Robin...
Ticket made with ProVape. Sending it out tomorrow. :p

Now it's even flakier than what I wrote them. While using it right now, it wants to start the menu, as well as tell me my atty is not working, at times. :facepalm: They want me to send the kfl with it. I will do that. Just put a new coil in there and tested to see if it is still saying that atty is not working. It works for a while, then it says that the atty is no good. Wait a minute and not doing anything to it, it works again. Vape a little more, the menu decides it wants to wake up.

:grr: :censored: :grr:

That's why it is going to the spa. Oh, and they said to make sure the contacts are clean or they will/may charge a cleaning fee. Um never worked right long enough for me to get it dirty ... Just sayin' :rolleyes:

Anyway. It will be going on a trip. I can get by with the one kfl. I only vape one flavor anyway. :lol:
 

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
Ticket made with ProVape. Sending it out tomorrow. :p

Now it's even flakier than what I wrote them. While using it right now, it wants to start the menu, as well as tell me my atty is not working, at times. :facepalm: They want me to send the kfl with it. I will do that. Just put a new coil in there and tested to see if it is still saying that atty is not working. It works for a while, then it says that the atty is no good. Wait a minute and not doing anything to it, it works again. Vape a little more, the menu decides it wants to wake up.

:grr: :censored: :grr:

That's why it is going to the spa. Oh, and they said to make sure the contacts are clean or they will/may charge a cleaning fee. Um never worked right long enough for me to get it dirty ... Just sayin' :rolleyes:

Anyway. It will be going on a trip. I can get by with the one kfl. I only vape one flavor anyway. :lol:

I would be annoyed if my P3 with KFL did that. It's good you're sending it to the Provape Spa and I'm betting when you get it back it will be a more stable device to use.
 

Mtek

Ultra Member
ECF Veteran
Verified Member
Oct 14, 2014
1,587
5,010
WA
Nice to see stealth and ice variants, hope the stealth ring is actually sold as an accessory too.

Vape360, many would really like to see a brushed finish. You market the Kayfun 4 with a P3 base, it would be fantastic to see a brushed finish like svoemesto has. Most atties have a similar finish, and it looks really nice when everything matches.
 
  • Like
Reactions: Pinggolfer

jwbnyc

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Mar 4, 2014
6,023
24,413
Ticket made with ProVape. Sending it out tomorrow. :p

Now it's even flakier than what I wrote them. While using it right now, it wants to start the menu, as well as tell me my atty is not working, at times. :facepalm: They want me to send the kfl with it. I will do that. Just put a new coil in there and tested to see if it is still saying that atty is not working. It works for a while, then it says that the atty is no good. Wait a minute and not doing anything to it, it works again. Vape a little more, the menu decides it wants to wake up.

:grr: :censored: :grr:

That's why it is going to the spa. Oh, and they said to make sure the contacts are clean or they will/may charge a cleaning fee. Um never worked right long enough for me to get it dirty ... Just sayin' :rolleyes:

Anyway. It will be going on a trip. I can get by with the one kfl. I only vape one flavor anyway. :lol:

You have had the worst luck with this thing by far.

Maybe it's possessed.

linda-blair-green-vomit.jpg
 

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,544
Happy to be... Not Smoking!!!

thmstwwng

Senior Member
ECF Veteran
Aug 20, 2014
131
124
Kuala Lumpur, WP, Malaysia
Good evening,

We are pushing out a new update to the P3. We are doing free updates to those that want to arrange to send their devices in to the ProVape spa or if you have a local dealer that has a programmer they can also update devices.

Here is a list of what has been updated:

* Support for .5 ohm tanks - The P3 now supports tanks down to .5 ohms.

* Low Battery Alert - When the device gets down to 18% left in the battery, the light will slowly flash yellow to alert you that it's getting low. (Many users requested we bring this back from the 2.5)

* CheckAll (1 second) - The CheckAll feature now has the option to set it to 1 second. This allows for a quick look at your settings without leaving the display on for 5 or more seconds. (Another user suggested feature)

* Battery Filtering - We have added some additional battery filtering to help with some problems reported by users saying the battery was empty when there was still energy left. Having the new spring and making sure all your connections are clean and tight is the main fix for this, but extra filtering will also help.

* Money Saved Counter - This new feature allows you to set the price of a pack of cigarettes and the P3 will keep track of: How many cigarettes avoided, puff count, and how much money you have saved on cigarettes, based on the amount you set per pack.

* Various bug fixes
Hi Vape360, I've checked with local Authorized Upgrade Center but they say they have no idea about the upgrade. BTW, I'm in Malaysia.
 
Status
Not open for further replies.

Users who are viewing this thread