Official ProVari Radius Thread - Part 2
- Thread starter Vape360
- Start date
- th_trl_thread_readers 0
- Status
Guys, I have a question.
I built a coil that read 1.1 ohms, when I placed the tank in the Radius it gave the same reading but after a couple of puffs the mod read 1.3 (I guess just once), then it went back to 1.1 ohm, a minute later and after another couple of puffs it read 1.2 ohm. After that it has been stable at the original 1.1ohm reading for more than 2 days.
Can that happen with a new coil? BTW I'm using kanthal A1, this one was 26g single coil not spaced
Thanks
I built a coil that read 1.1 ohms, when I placed the tank in the Radius it gave the same reading but after a couple of puffs the mod read 1.3 (I guess just once), then it went back to 1.1 ohm, a minute later and after another couple of puffs it read 1.2 ohm. After that it has been stable at the original 1.1ohm reading for more than 2 days.
Can that happen with a new coil? BTW I'm using kanthal A1, this one was 26g single coil not spaced
Thanks
Check screws first. A loose coil lead screw can cause it. New wire can have a bit of variance that will settle once heated.
Thanks!
I'm sure the screws were OK and since it only happened when de coil was new, I guess it was the wire settling after the first puffs.
As soon as I arrive home from work I'll check the screws.
I'm sure the screws were OK and since it only happened when de coil was new, I guess it was the wire settling after the first puffs.
As soon as I arrive home from work I'll check the screws.
Uhh uhh, another question.
It might sound strange being this a Provari Radius thread but I wanted to ask if any of you guys have an opinion on the Vapor Flask Lite from Vape Forward.
The reason I ask here is that being the Radius such a good mod as I believe it, can't find a better reference to judge other equipment quality and dependability.
I already have 3 Radii (actually only using one of them) and might get more if the FDA fully enforces its %#"*/ deeming rule but was also considering buying less expensive back ups for the years to come.
Still have to buy more RBAs and figure out how to buy some nic
It might sound strange being this a Provari Radius thread but I wanted to ask if any of you guys have an opinion on the Vapor Flask Lite from Vape Forward.
The reason I ask here is that being the Radius such a good mod as I believe it, can't find a better reference to judge other equipment quality and dependability.
I already have 3 Radii (actually only using one of them) and might get more if the FDA fully enforces its %#"*/ deeming rule but was also considering buying less expensive back ups for the years to come.
Still have to buy more RBAs and figure out how to buy some nic
Last edited:
I have a Vaper Flask Lite living together with my Radius and P3, It is actually a very fine little Mod, I use it when I go out (having a Beer) and don't want to take my precious Pro Vape gear along. It has been working flawlessly For 5 month now, not one single issue, so as a supplement I highly recommend the Vaper Flask Lite. This is what I use these days:
To you folks wondering about why ProVape may have disco'ed the build your own Radius...At the end of December another segment of the deeming kicks in, and manufacturers have to submit a complete listing of all products available to the FDA. A custom built mod has no place in such a description, because each variance from unit to unit makes them a distinctly different product.
As I see it, streamlining would be a necessary step to regulatory survival, and could also be viewed as an intent to stay in the game.
See, speculation can be positive as well
As I see it, streamlining would be a necessary step to regulatory survival, and could also be viewed as an intent to stay in the game.
See, speculation can be positive as well
Thanks AndersK. As sson as I manage to get the fourth Radius
, I'll get a couple of those.
This is the area to enlarge and look at...
Sent from my iPhone using Tapatalk
It seems the finish is failing?
That looks like crap! You should send it to me for proper disposalThis is the area to enlarge and look at...
It seems the finish is failing?
but seriously, bummer Astro, sorry to see that. It's a really cool mod.
What are you gonna do?This is the area to enlarge and look at...
It seems the finish is failing?
Provape sells silicone sleeves for the Radius, and I think those are a good idea to protect it. I use the sleeve all the time.
Hey There radius peoples, long time no speak. Got back into acting, mostly background work so far, but it has been keeping me busy.
Sent from my SM-N910V using Tapatalk
Sent from my SM-N910V using Tapatalk
Provape sells silicone sleeves for the Radius, and I think those are a good idea to protect it. I use the sleeve all the time.View attachment 614637
i bought one, fit great but, hmmm about an hour after putting it on my radius, it looked like a fuzzy sleeve! i quickly learned it is not such a good radius sleeve for us cat lovers
Well, look the bright side of it, having a fur-coat your Radius won't catch a cold.
Your post helped me like the black onyx a bit more, I was wondering about how durable their new finish was, and you just answered that. If it was as strong as a Zenkote, I wouldn't question it.
KAS
- Status
