OFFICIAL - SMOKELESSIMAGE.com Thread

[Imagine]

hmmm this seem to be an odd issue... since the other 2 are charging fine... could the battery already be fully charged?

does it start to charge and stop? any other symptoms?

Imagine, I did that several times..with the new chrome battery and my older one that charged fine the 2 times I charged it before.
I have read the manual on SI website twice so I'm not sure....worried about not being able to charge my other battery when it runs out until I get my UB charger in the mail couple days.

 

[CaliVaper]

BTW KushSmoka420 , you may/may not be a noobie here, so I put a link below for you to the AWESOME Smokeless Image Contest-read the rules first and post away! That contest should be over very soon now-so run-run-run to the thread!!!!

Good luck to all my Voltie Friends!!!!

http://www.e-cigarette-forum.com/fo...ping-happy-valentines-day-smokelessimage.html

Thanks, gonna put an entry in right now.

 

[Kelly A Fox]

I just want to say good night or good day to everyone...my sweety wants me to watch a movie with him, so I will check in tomorrow!
Take it easy all!

 

[lilac7779]

I think I've got it now Test

Looks good, Butch. Welcome to you and Kelly. Glad you both found us.

 

[Kelly A Fox]

hmmm this seem to be an odd issue... since the other 2 are charging fine... could the battery already be fully charged?

does it start to charge and stop? any other symptoms?

My new one I have never gotten it to charge..when I put it on the pcc the light will kinda flicker when i push the button for 4 seconds and then go out when the charger light goes out. The older battery which worked fine before...I put it on the charger cuz the led flickered, and well the same thing happened light wont stay on just flickers...and I try to vape and it flickers and won't vape, so it's definitely needs charge......I think it's the pcc??

 

[Can-Can]

Hi dear Volties~

I ordered the passthrough and better wallwort, finally. So jazzed to be getting it.
I've read so much since my order re how fragile passthroughs are. Is there anything I should know, what to do or not do?

 

[Amethyst_Star]

Hello Butch, Kelly, and Can-Can! Glad to see you here!

 

[Imagine]

nope...just treat it the same as your batteries.... make sure you clean the threads and do not get liquid inside

Hi dear Volties~

I ordered the passthrough and better wallwort, finally. So jazzed to be getting it.
I've read so much since my order re how fragile passthroughs are. Is there anything I should know, what to do or not do?

 

[Imagine]

I am confused I am sorry... is the PCC chargin any batteries ok?

My new one I have never gotten it to charge..when I put it on the pcc the light will kinda flicker when i push the button for 4 seconds and then go out when the charger light goes out. The older battery which worked fine before...I put it on the charger cuz the led flickered, and well the same thing happened light wont stay on just flickers...and I try to vape and it flickers and won't vape, so it's definitely needs charge......I think it's the pcc??

 

[Esoterica3]

Well if that is true then that is deffinately a mistake on E-cigarette-forum's part. I'd think ESPECIALLY since its a suppliers forum that there should be the ability to edit posts indefinately. And IMO, EVERYONE for EVERY thread should have that ability for at least the OP/ 1st post (or start of) thread, because it is very usefull for showing updates in threads with many pages, you may not be able to look through 100, much less 1000 pages to find updates.


Your eyes do that too... Like when looking through ski goggles on a bright day. Say you have pink/orange lenses and when you first put them on everything is pink/orange, but after a bit, your brain sorta just tunes it out, and its like your seeing normal colors (just darker) like regular old sun glasses.

Like w/yours when WE can't see what the prob is?

 

[Esoterica3]

That is beautiful. About the only butterflys we see here are monarchs & once in a while there will be a black one but not that georgeous

That IS a monarch! just a dying one....

 

[Can-Can]

Thanks, Imagine. Great sale, fun contest-you must be bushed. Slainte!

 

[reptilr]

Im not up to speed on my butterfly names, & we usually only see an orange one here & there. So thankyou for naming it. Est

Awesome, My wife is big into butterflies, we have been to many butterfly conservatories in the US and the one in Niagara Falls. For christmas we got our daughter a butterfly hatchery, where you let it hatch and then release, so this summer should be cool.

Wow i have never heard about hatchery's for butterfly's how exciting. We do however have a place at our zoo that is like a massive greenhouse where thousands of butterfly's fly around and you can walk through their rainforest and observe them. Its all controlled in temps and some land on your head... Gotta be really careful in there.

 

[reptilr]

That IS a monarch! just a dying one....

Whoops forgot rest of sentance... Did you mean in general they are dying or the one i was showing? Was confused by that

 

[solardrgn]

so im having a couple issues with my slider PCC... kind of sucks that i just now noticed this, i just got my battery replaced which was pretty much DOA (stopped working first day/less than an hour). heres some pics so you can see what im talking about

first two pics - the top sliding part does not sit flush with the rest of the body. something is pushing it off to the side because if i try to adjust it, it just springs back to the side.

this pic is how the finish is starting to come off. i wanted to know if this was happening to anyone else. it is not that big of a deal, but i do like the matte finish...

this is what worries me. the top and bottom half are separating form the center and i can't press them back together... if anyone else has had this happen im hoping that there was some way to fix this. i would really rather try to fix this my self, i dont really want to wait and have to pay for return shipping again...but i also dont want to rip it apart to find out its not something that i shouldnt fix either or if i should just send it back and wait again

EDIT: i just noticed it is bending right where the battery is... could my battery have gotten too hot to where it flexed the plastic?

ive had this kit for less than 2 weeks and dont get me wrong i love the performance and have been analog free ever since. its pretty cold, for cali anyway so ive always had to wear a jacket and keep the pcc in the jacket pockets so it doesnt get smashed or anything like that

thanks

 

[ReleaseXtheXKraken]

i too have a question about a pcc...the mega pcc v2. It doesnt want to charge my batteries. I can charge them fine on the usb charger I got with my kit, but the pcc will tell me that a dead battery is fully charged. While the battery is charging it is ssupposed to stay lit, and when it is done charging it is supposed to blink and then shut off correct? My battery while "charging" in the pcc will stay lit for a matter of seconds (I do set the pcc to charge the ecig battery btw) then will blink and everything shuts off. Is anyone else having issues with this case?

 

[Retriever]

So what is the verdict on the new cartos? I didn't hear anything about the change in them. I am running low on my RY4. What should I do? Is SI going back to the old cartos?

 

[Retriever]

Hello Volties this is my first post on this sub forum and I just wanted to say hello, I've been lurking quite while and I have been vaping only a week after getting my pro kit from SI. So glad I chose VOLT and wanted to say thank you Imagine and the great customer service I have gotten so far. Before I go on with all my noob questions and my initial assessment I wanted to first post this to make sure I'm doing to correctly....kinda new at the whole forum thing.

Welcome Kelly! Glad you are here.

 

[Kelly A Fox]

i too have a question about a pcc...the mega pcc v2. It doesnt want to charge my batteries. I can charge them fine on the usb charger I got with my kit, but the pcc will tell me that a dead battery is fully charged. While the battery is charging it is ssupposed to stay lit, and when it is done charging it is supposed to blink and then shut off correct? My battery while "charging" in the pcc will stay lit for a matter of seconds (I do set the pcc to charge the ecig battery btw) then will blink and everything shuts off. Is anyone else having issues with this case?

This is exactly what was happening to me last night with all three of my batterys, I fiddled a bit with pcc...gently squeezing the side where you plug it in and one the older batteries light finally stayed on and I was able to get both older ones charged...YIPPIE! But the new 78mm same issue. Not sure if I should wait for ub charger and try that or return it. But I'm happy I got the other 2 charged.
Take it easy everyone

 

[Retriever]

Glad you solved the problem Kelly. Have a good day.