Official Squape R[eloaded] thread!
- Thread starter brickfollett
- Start date
- th_trl_thread_readers 0
- Status
Okay - you know I gotta ask. How is it with nickel and TP? Have you tried yet?I can't speak for Vakaion, but my SqR still gets plenty of use since the arrival of the UTA2.
I have enough vape love to spread around
THE WGU CLUB
Card Carrying Member/Co-Founder
I finally got around to building for my new V4 hana modz yesterday. I can't believe it actually sat for a couple days before I finally got to it. That is so not like me. But anyway, I built my Calix with nickel for the first time to test out my Hana and I got to say - very impressed. The Calix is not the easiest atty to build so I was a little apprehensive with the long legs and all, but going on 24 hours now and very stable and awesome. I haven't even used the atty lock feature yet and I was half expecting to with a new atty I've never built with nickel before.
my Sqr is still leaking.. B deck all holes covered and it still leaks a bit.. getting sick of taking apart my VS to clean..
Hi Chia. Did you make sure none of the wick was touching the rim of the air tube? It's kind of tricky to do especially since the wick likes to hit it right where it leaves the coil (and you have a juice hole right there to worry about, but it's doable. Once I made sure to keep the wick coming out of the coil away from that rim and packed the cotton into the juice holes mine stopped leaking.
Haha lol awesome glad to hear!!I can't speak for Vakaion, but my SqR still gets plenty of use since the arrival of the UTA2.
I have enough vape love to spread around
THE WGU CLUB
Card Carrying Member/Co-Founder
Is it worth buying though since i got the sqr?
Need to think about it if it's worth the hefty price tag....
Sent from my Passport using Tapatalk
Are you ordering/waiting for the new SqRs or the SqR? Vapinart allowed me to put the new SqRs in my wishlist cart but wouldn't let me pre-order it.
. Now I just need to make sure I'm all over it when it is finally released. Just a couple more days.SqR. No need for a nano when it will be sitting on a devers. It won't leave the house! [emoji1]Are you ordering/waiting for the new SqRs or the SqR? Vapinart allowed me to put the new SqRs in my wishlist cart but wouldn't let me pre-order it.
Undecided about the Rs myself. Not really interested in buying 4 new complete tanks, so I'll probably wait and see if the tank and chimney will be sold separately at some point.
I get that they don't wanna do that from launch day, but it should be made possible at some point, if they truly value their customers
I get that they don't wanna do that from launch day, but it should be made possible at some point, if they truly value their customers
Ya well the reason I m being frustrated is I do like the SqR very much with the B decks.. Probably the easiest to coil and wick... Cut the cotton to length and stuff them it.. What can get easier than that ! Lol
But I do move ard when working and it gets pretty hot, so may not the the atty's fault at all..
Anyways it's just ranting.. Sometimes thing do get better once I stop fussing over it.. I hope
Haha! In my opinion, yes.
It's not a large margin of difference though, Each has their pros and cons.
And like I said earlier, I do prefer one of my juices (a DIY) in the Squape. I'd fine-tuned the flavor percentages with the Squape to be just right for it, in any other atty it's not perfect. And I can't be bothered experimenting with that juice more. lol
The only atty I haven't tried with nickel is the UTA, because I'm currently using titanium grade 1 instead.
ErlK/Calix/Squape all worked fine with ni200. The Squape with the B deck was even better with all that room!
Squape and UTA both work great with Ti as well.
I think I'm going to order a UTA clone from fasttech. Seems like a tank I'd enjoy.
Good luck! From what I'd heard previously the clones were based on the earlier version, and not that great.
YMMV!
Are you ordering/waiting for the new SqRs or the SqR? Vapinart allowed me to put the new SqRs in my wishlist cart but wouldn't let me pre-order it.
Quick heads up, since I just spoke with VA:
1. They will actually receive them tomorrow.
2. They expect it will be with the "W" deck.
3. If other decks are available they should also know that tomorrow.
4. They expect they will have enough to accommodate...
5. Will start selling at 12:00 Noon as before.
Thanks for sharing this, Jazz. So, it's 12:00 noon Eastern? Did they mention anything about price?
I just saw Rs appeared on vaperev, @ $165. I think that's a tad high... at 135CHF MSRP, this exchange rate doesn't make too much sense.
It's why I've been buying my gear almost exclusively from vendors in the EU.
After the VAT is dropped and you do the exchange, I'm winding up with attys SHIPPED a good bit cheaper than they sell for here before shipping (I pay tax at VR and other CA vendors, so it more than kills it in that case, lol)
THE WGU CLUB
Card Carrying Member/Co-Founder
My thoughts exactly. There is a vendor in Germany who gets goods to my door in 3 days exactly. Weak Euro minus VAT + very fast and reasonable shipping = better deal to buy there. And more choices anyway. It's a shame, I love to support local business, but at the end of the day, the numbers smack me right in the face too often.
And any way you don't have to deal with USPS is just gravy on top of the deal.
Well, I have it saved in my Cloud9 cart, with the "W" deck, at, what I presently recall as (checking) 91,63 GBP that converts to $ 140.99.
That said, I have had nothing but a great experience with VA, and, bought my second K4 from VapeRev at at substantial discount.
Sooooooooo, we'll see which gets my order.
I want to see what InTaste posts theirs at, I've gotten many a suhweet deal from them. I initially discovered the beauty of buying overseas when I bought my K4 on launch day, which is around the time the Euro really started becoming favorable for those of us in the US. (it's dropped a good bit more since then, hell for a few weeks it was a few cents from 1:1, although its bounced back slightly)
Cloud9 was out, VR had theirs in customs, and someone recommended InTaste. Hopped on and bought it without a second thought. Realized I paid like $25-30 less than at VR and it was here in 2 days, blew my mind. Ever since then pretty much every atty and mod has come from a Euro vendor, many times out of choice, just as many times because the particular item isn't even sold stateside.
THE WGU CLUB
Card Carrying Member/Co-Founder
Cloud9 was out, VR had theirs in customs, and someone recommended InTaste. Hopped on and bought it without a second thought. Realized I paid like $25-30 less than at VR and it was here in 2 days, blew my mind. Ever since then pretty much every atty and mod has come from a Euro vendor, many times out of choice, just as many times because the particular item isn't even sold stateside.
THE WGU CLUB
Card Carrying Member/Co-Founder
Well, I have it saved in my Cloud9 cart, with the "W" deck, at, what I presently recall as (checking) 91,63 GBP that converts to $ 140.99.
That said, I have had nothing but a great experience with VA, and, bought my second K4 from VapeRev at at substantial discount.
Sooooooooo, we'll see which gets my order.
LOL, wrong, on C9 it's in your "basket", not your cart. Remember, it's Europe, so it's more minimalistic.
Funny thing is, the first English I ever learned was British, but now some things sound just hilarious.
The last time I "sourced" items from C9, they made it to my "flat" in about 9 days, so not too bad either. Nice packaging, too.
Good luck, mate.
^QFT. I would be concerned with an overseas vendor, but not one out of Germany. Those dudes don't mess around when it comes to doing business or being organized.
Love Germany.
- Status
