I had a question, i recently thought my attys were dead, but it turned out that they just didnt work with one of the batterys. I have blu batteries with m501 attys, and the one that doesnt work says it is fully charged, and the tip lights up when drew on, but no vapor. If I plug in the other battery, then the atty works fine and produces regular vapor. Sometimes when i plug in the battery with the usb charger, the light is both red and blue on the charger. So I was just wondering if anyone had an answer for this.
One battery doesn't work with atty
- Thread starter amarker
- Start date
- th_trl_thread_readers 0
- Status
Hi Armarker--There are a couple of things that can cause this issue. The first obviously being that this battery is a dud and needs to be replaced.
The second is much more difficult to see and I can say with confidence that many good atomizers have gone in the garbage because of it. Then center post of the atomizer that carries the positive connection from the battery to the atomizer does not make contact with the center post of the center post of the battery. This is becasue the center post of the atomizer begins to seat downward ever so slightly after twisting the battery on and off.
Pulling the center post up from the hole in that atomizer sometimes is all it takes, but I have found that in many cases the center post needs to be built up. As shown here by Breakfeast (apprecate one of the best posts on this forum Breakfeast):
http://www.e-cigarette-forum.com/fo...enter-conductor-gap-penstyle-atomizers-4.html
This is a much easier fix then building up the post with solider and I highly recommend it.
Hope that helps,
Sun
- Status
Similar threads
