Onscreen Features I need in a Mod.

Status
Not open for further replies.

Sad Society

Ultra Member
ECF Veteran
Verified Member
Aug 5, 2009
1,458
818
Los Angeles, CA
I'm not sure where to put this post. So I'll just put it here in the General Forum. :)

I've been vaping since 2009, and I've been through a few mods. I have the Lavatube 1.5 (first version) that is still going strong. I then got an SS Lavatube that has the spring loaded center pin and the center pin broke...and the electronics in that one acted funky as well. The display would sometimes give me odd readings.

I then got an SS sigelei ZMax and the center pin on that one got pushed down past the insulator into the mod. It's my fault for over tightening my atty on that one. I believe the center post is still connected to the wire. But I cant get the center post back out to put a new insulator on (I tried).

I then got an Evic, which was nice for awhile. Until I dropped it too many times and my tank being top heavy, knocked the top off and eventually the positive and negative wires both broke off.

Right now I'm back to using my version 1 Lavatube. It's nice because it doesn't have any low ohm limits.

So here are the Onscreen features I would like.
-Ohms
-Voltage Calculation (for the ohms)
-Wattage Calculation
-Battery Life

I would like to have these features all on one screen. And guess what? It does exist.

The latest download upgrade from Evic had all those features on one screen. And I do mean 'one screen'. Not a menu that you have to scroll through to find each feature.

Right now I'm getting ready to build a mod using the DNA20 which has all those features on one screen. I'm tired of buying mods made overseas only to have them break.

Anyways, I was wondering if there are any other mods that have such features on one screen besides the Evic and the DNA20 chip, even if it's made in China.

Thanks, and Vape On.
 

EddardinWinter

The Philosopher Who Rides
ECF Veteran
Verified Member
Jun 13, 2012
8,866
28,169
Richmond, Va
I only know of the eVic meeting this criteria. I have one that I have had for 2 1/2 months. I am very happy with my eVic. Its power maxes out at 11W or 5V, whichever you hit first. If you don't vape too high on voltage, or with very low ohms, it could be a good fit for you. I like the version 1.3 firmware and the updates are free, which is nice.

If you use dual coils, it creates problems for the eVic, so it's calculations are a not right cause it only "sees" one of the coils. Happy Vaping.
 

Sad Society

Ultra Member
ECF Veteran
Verified Member
Aug 5, 2009
1,458
818
Los Angeles, CA
Thank You for the responses.

Yes, I'm aware that there are companies/builders such as Fazed, and others who are building and selling mods with the DNA20.

Like I said in my OP, I am building my own DNA20.

To perhaps sum up my OP, I am asking if there are other mods out there that have all the 'onscreen' features that I mentioned in my OP apart from the DNA and the Evic.

Vape On.
 
Status
Not open for further replies.

Users who are viewing this thread