It is, I think youll pick it up very quickly. Remember to hold a tissue or something under the carto cause youll normally get a few drops. I normally just wrap the bottom of the carto in a tissue/papertowel and hold it in my hand while filling. and remember to wipe everything well when your done. The drops are from alittle juice getting into the middle airhole. You can either let it sit straight up for a min or 2(still with the tissue underneath) and a little more juice will drop into tissue, or if your in a rush what I do is blow thru the threaded end and that gets it out of the middle (I normally do both, let it sit and let gravity do the work, and then blow thru it lightly). You should be able to see down the middle hole when your done (hold it up to a light), unless youve been using it for awhile and it gets alittle clogged. Then you might not be able to see the light thru it.
Oh and a tip for keeping it stood straight up is to use the cone of your PV. Then you dont have to hold it in your hand. When Im done filling, I sit a tissue on a counter with the cone on it and put the carto in it, threaded side touching the tissue. It will keep it vertical and let any drops come out. I dont generally use the cone on my E-Power when Im using it, but I find the cone works great for this purpose.
The dripping method also works well for filling but does need 20-30 min to let the juice settle. If you have the time then its fine, but I normally find I dont have enough time to wait that long because Ive got to get to work, etc. The syringe method is much quicker and thats why I like it. Remember after your done filling to rinse out the syringe well. I just draw water in and out of it a few times. If your rinse it out well, you can continue using the same syringe to fill with for a long time.
Oh and make sure you only put one juice in a carto. Then you dont have to worry about cleaning it to put another juice. I designate one carto for each juice I vape and just keep refilling it. Ive been vaping 2 juices mostly lately and I fill them both in the morning in a Ressurector and Im good all day.
Oh and one more tip. I keep thinking of things as Im writing this, but I promise this is the last one. Ha sorry.
As far as the syringe that comes with the Ressurector, its a 5ml syringe. The measurements that are on the syringe will come off very easily after you use it for awhile. (The one I use to fill with has came off completely)
If you want to keep them on, you can do 2 things. Either put a clear piece of scotch tape over all the measurment lines/numbers as soon as you get the syringe, or you can spraypaint it with clear and it will make it so it doesnt come off easily.
Ive never done the spraypaint cause I dont have any but Ive heard it does work well. I just put a clear piece of tape over it right when I get the syringe.
Like I said, the syringe I fill with has no measurements on it anymore. After you fill for awhile, you really dont need the measurements bc you will know about how much it takes to fill but it the beginning you might want them.
If you ever start making your own juices, the measurements are important to have so you can be exact, but for filling a carto its not too important.
Sorry that was so long winded. These are all just things that I had to figure out myself when I started so hopefully if makes it alittle easier for you.
Goodluck and let me know if you have any questions once you start!
Oh and a tip for keeping it stood straight up is to use the cone of your PV. Then you dont have to hold it in your hand. When Im done filling, I sit a tissue on a counter with the cone on it and put the carto in it, threaded side touching the tissue. It will keep it vertical and let any drops come out. I dont generally use the cone on my E-Power when Im using it, but I find the cone works great for this purpose.
The dripping method also works well for filling but does need 20-30 min to let the juice settle. If you have the time then its fine, but I normally find I dont have enough time to wait that long because Ive got to get to work, etc. The syringe method is much quicker and thats why I like it. Remember after your done filling to rinse out the syringe well. I just draw water in and out of it a few times. If your rinse it out well, you can continue using the same syringe to fill with for a long time.
Oh and make sure you only put one juice in a carto. Then you dont have to worry about cleaning it to put another juice. I designate one carto for each juice I vape and just keep refilling it. Ive been vaping 2 juices mostly lately and I fill them both in the morning in a Ressurector and Im good all day.
Oh and one more tip. I keep thinking of things as Im writing this, but I promise this is the last one. Ha sorry.
As far as the syringe that comes with the Ressurector, its a 5ml syringe. The measurements that are on the syringe will come off very easily after you use it for awhile. (The one I use to fill with has came off completely)
If you want to keep them on, you can do 2 things. Either put a clear piece of scotch tape over all the measurment lines/numbers as soon as you get the syringe, or you can spraypaint it with clear and it will make it so it doesnt come off easily.
Ive never done the spraypaint cause I dont have any but Ive heard it does work well. I just put a clear piece of tape over it right when I get the syringe.
Like I said, the syringe I fill with has no measurements on it anymore. After you fill for awhile, you really dont need the measurements bc you will know about how much it takes to fill but it the beginning you might want them.
If you ever start making your own juices, the measurements are important to have so you can be exact, but for filling a carto its not too important.
Sorry that was so long winded. These are all just things that I had to figure out myself when I started so hopefully if makes it alittle easier for you.
Goodluck and let me know if you have any questions once you start!
