RDA Origen Little 16mm Clone

[LarryPer]

Yea I seen that, sucks because I like using PayPal. They had some problem with them, lets hope they get it fixed at some point.


It would be an option for someone without a squonk mod. Strange they use the same deck that could be built dual coil, but design the tank and airflow for a single coil setup. I have not run mine in single coil yet, but it still should have good flavor. I may get one of these on my next order to try as I do have quite a few non-squonk mods.

Yes but it too is a BF
Why would

Yea I seen that, sucks because I like using PayPal. They had some problem with them, lets hope they get it fixed at some point.


It would be an option for someone without a squonk mod. Strange they use the same deck that could be built dual coil, but design the tank and airflow for a single coil setup. I have not run mine in single coil yet, but it still should have good flavor. I may get one of these on my next order to try as I do have quite a few non-squonk mods.

a BF have a tank above it?

 

[LarryPer]

Yea I seen that, sucks because I like using PayPal. They had some problem with them, lets hope they get it fixed at some point.


It would be an option for someone without a squonk mod. Strange they use the same deck that could be built dual coil, but design the tank and airflow for a single coil setup. I have not run mine in single coil yet, but it still should have good flavor. I may get one of these on my next order to try as I do have quite a few non-squonk mods.

But it too is a BF
Why would a BF have tank above it?

 

[oplholik]

I read there on the reviews that it is not a shen ray

Thanks Larry, good to know.

 

[Izan]

I didn't get an auto reply, but I emailed direct to Doris. Good to hear it will be back up this week.

RE: Doris
Sorry to be the bearer of bad news.

"
Good bye from Doris.

Hi all, it is a hard decision for me to decide to leave Focalecig. I worked for this company 6 months Before we built the Focalecig site, it is almost 4 years. I was playing too many roles in this company and felt too tired, but this wasn't the reason i chose to leave. Focalecig for me is like a baby, i defend it and fight for it over last 3 years, I don't want to leave it at its most difficult time.

There is something else that i can't accept and it hurts me a lot......and from now on, the name of Doris and Focalecig is separated." Source

 

[LarryPer]

RE: Doris
Sorry to be the bearer of bad news.

"
Good bye from Doris.

Hi all, it is a hard decision for me to decide to leave Focalecig. I worked for this company 6 months Before we built the Focalecig site, it is almost 4 years. I was playing too many roles in this company and felt too tired, but this wasn't the reason i chose to leave. Focalecig for me is like a baby, i defend it and fight for it over last 3 years, I don't want to leave it at its most difficult time.

There is something else that i can't accept and it hurts me a lot......and from now on, the name of Doris and Focalecig is separated." Source

Oh God
First Brad and Angelina
Now this

 

[oplholik]

I have never ordered from Focal before, so I don't know any of these folks, but I'm wondering, is Focal having problems?

 

[Burnie]

RE: Doris
Sorry to be the bearer of bad news.

"
Good bye from Doris.

Hi all, it is a hard decision for me to decide to leave Focalecig. I worked for this company 6 months Before we built the Focalecig site, it is almost 4 years. I was playing too many roles in this company and felt too tired, but this wasn't the reason i chose to leave. Focalecig for me is like a baby, i defend it and fight for it over last 3 years, I don't want to leave it at its most difficult time.

There is something else that i can't accept and it hurts me a lot......and from now on, the name of Doris and Focalecig is separated." Source

Thanks for the post, But I can't like that, That Sucks. I hope Doris the Very Best at ShenRay, and Focalecig is going to hurt with her gone. She really cared about her customers, we were not just customers, we were friends, and she always took care of any problems. She will be sorely missed.

 

[Burnie]

I have never ordered from Focal before, so I don't know any of these folks, but I'm wondering, is Focal having problems?

With Doris gone, I see things going downhill fast.

 

[muzichead]

Agree. Looks like a 1:1 to me too, but the fins aren't as deep and the deck isn't brushed. Very minimal differences. It's awesome. Here's a pretty bad shot of the deck.

Where did you get your original from? Not the same as the 2 originals I have. Here's a pic of the deck on an original...

 

[Burnie]

Where did you get your original from? Not the same as the 2 originals I have. Here's a pic of the deck on an original...

Yep the deck is different on the clone, so not 1:1, but styled like the original. Thanks for pointing that out.
I still like my clone just fine though.

 

[zoiDman]

RE: Doris
Sorry to be the bearer of bad news.

"
Good bye from Doris.

Hi all, it is a hard decision for me to decide to leave Focalecig. I worked for this company 6 months Before we built the Focalecig site, it is almost 4 years. I was playing too many roles in this company and felt too tired, but this wasn't the reason i chose to leave. Focalecig for me is like a baby, i defend it and fight for it over last 3 years, I don't want to leave it at its most difficult time.

There is something else that i can't accept and it hurts me a lot......and from now on, the name of Doris and Focalecig is separated." Source

Sorry to hear this.

I haven't done much Ordering from Focal lately. But I used to. And the time I had a Problem, Doris went out of her way to make things Right.

She also seemed Very Receptive to New Product suggestions. And to Constructive Inputs about making Focal a better place to shop.

 

[herb]

I have an authetic and two clones. I like them both . The cap on the Norbert version is very hard to remove even when lubricated with e-juice. The clones are no problem in that aspect

My clone's top is difficult to remove , i got mine at 3F vape , it snaps into place very solidly .

 

[herb]

I'm thinking of getting two of these, one for a P67 Reos, and maybe for a Pico Squeeze I'm considering.

Be perfect for a Pico , those things are as small as the atty itself .

 

[glasseye]

Where did you get your original from? Not the same as the 2 originals I have. Here's a pic of the deck on an original...

I got it from Vapinart. Looks the same to me, just my picture is bad.

 

[muzichead]

I got it from Vapinart. Looks the same to me, just my picture is bad.

The pic isn't that bad that it shows the +pin in both of yours are cloned circular pins... I'm guessing the O and C below them stand for original and clone? The original is oblong shaped like I posted above.

 

[Burnie]

The pic isn't that bad that it shows the +pin in both of yours are cloned circular pins... I'm guessing the O and C below them stand for original and clone? The original is oblong shaped like I posted above.

I did some searching after your other post, and I agree that I think both of these are clones, I could be wrong, but that is what I found, the original has the oblong shaped + post, not the round one in the clones. As such I changed my original post about me thinking mine to be a 1:1, which it is not, but it is still a great clone. JMHO

 

[glasseye]

The pic isn't that bad that it shows the +pin in both of yours are cloned circular pins... I'm guessing the O and C below them stand for original and clone? The original is oblong shaped like I posted above.

I see what you mean. Now isn't that interesting. So Vapinart sold me a clone for a full price original? I've had it for probably 8 months, before I thought the clones were available.

 

[herb]

My clone has that circular ring as well , i didn't know the original was free of it . Interesting , like Burnie said it works great however .

 

[glasseye]

OK, I'm convinced I do have an original. It's just not the oblong one. Looks like the same round + that the tiny tank (original) has. I didn't think vapinart would do that, but I've heard some odd/bad stuff when it comes to vaping.
You can see the deck I have here at 4:46

 

[Train2]

Hmmm. I have both, and never actually noticed, but yes - the authentic has the oblong...
Also the finish is different, similar to the image above - authentic is more of a bead-blast/matte kind of finish, inside and out.

Clone on right.