OXVA Origin AIO 18650

Status
Not open for further replies.

Frenkyou

Ultra Member
ECF Veteran
  • Apr 26, 2019
    2,049
    2,165
    56
    italy
    www.svapo.it
    OXVA is a newcomer in the vaping sector and is making its debut with the Origin AiO 18650 40W device

    The cardboard packaging on the front shows the image of the Mod, the brand name, the product name, an adhesive label that marks its color, finally remembers that the device is powered by a 18650 cell.
    The salient features, the content, the logos, the brands, the scratch and check, the bar code and all the addresses (physical and social) of the manufacturer are summarized at the rear.

    1.jpg


    This beautiful packaging opens like a gull wing, the transparent plexy with the characteristics of the product allows you to see the Oxva Origin Kit below. The fact that the side panel is magnetized gives a very "premium" feeling to the opening of the package.

    2.jpg


    The package includes:

    1- OXVA Origin device
    1- POD OXVA Origin
    1- Pre-assembled DTL 0.3Ω 30-40W Mesh Coil
    1- Mesh Coil DTL 0.5Ω 20-25W
    1- MicroUSB cable
    1- User manual (English-French-Spanish-German)
    1- Certificate of guarantee

    3.jpg


    Features of the OXVA Origin 40W:

    Chipset: Smart photon for automatic maximum adjustment of watts
    Dimensions: 113.5x32.8x23.5mm
    Weight: 70gr
    High discharge single 18650 battery - Not included
    Output power range: 8-40 W.
    Zinc alloy frame construction
    0.69 "OLED screen
    Rechargeable pod with replaceable coil
    Lateral refil system with silicone cap
    0.3Ω UNI Mesh Coil
    0.5Ω UNI Mesh Coil
    Traditional UNI MTL coil of 1Ω 10-15W optional
    RBA with optional 510 attachment
    Installation of the Plug 'n' Play coils
    Threaded air flow control ring nut applicable to RBA and all UNI Coils

    4.jpg


    5.jpg


    Available colours:
    Black / Red, Black / Brilliant, Green / Muzo, Aurora / Silver and Carbon Fiber / Black

    6.jpg


    Holding the Origin of Oxva in your hand you can immediately notice the pleasant triangular shape with rounded edges and the good balance between the lightness of the plastic panels and the solidity of the zinc alloy frame.

    The first of the side panels houses the rectangular-shaped liquid control window positioned vertically (it does not offer good visibility to the older and visually impaired vaper) below which there are 3 goon style ventilation holes, finally vertically we find the name of the Brand engraved in silver and red on the plastic.

    7.jpg


    The solid and robust Drip-Tip seems to be in derlin has a beautiful shape, rough at the base with a conical shape up to the top, it is not replaceable or at least, I was unable to extract it.

    Front vertically arranged at the top we find the inscription Origin on the metal, the backlit fire button is small in round shape and slightly recessed as in a sort of navel a little uncomfortable to operate for those with big fingers like me.

    The underlying 0.69 "Oled display is arranged vertically.

    With the same shape as the Fire button but with a slightly concave but less recessed design, we find the only Up / Down / Block / Unblock adjustment button

    At the bottom and last we find the USB charging socket, useful if you do not have an external charger.

    8.jpg


    The side panel to access the compartment / battery opens by inserting a nail in the special slot, in position and rubbing it you feel a minimum play, perhaps a millimeter, but I don't think it can go anywhere even with strong finger pressure thanks to the outer edge and two good magnets that hold it in place.

    The battery compartment has the + and - poles well marked, the two pins are gold plated and the negative one on the top is well sprung; together with the strap it offers a good insertion / deactivation of the 18650 cell.
    The chip cools through four four-leaf clover windows.

    9.jpg


    The seat for the pod houses the air intake holes, a serial number and of course the two very small and gold / gold plated contact pins, this compartment seems well insulated from the circuit below.

    At the base of the Oxva Origin we can see 3 vent holes the C E mark and the disposal logo.

    10.jpg
     

    Frenkyou

    Ultra Member
    ECF Veteran
  • Apr 26, 2019
    2,049
    2,165
    56
    italy
    www.svapo.it
    Pod:

    Once initialized with the liquid, the coil is pushed into the 3ml transparent Pod.

    To facilitate extraction and insertion, the Pod is equipped with a convenient grip, the Drip-Tip remains stationary on the body.

    The refill is easy, the hole is large enough and is placed on the side so it is not necessary to extract anything, it fills and vapes.

    11.jpg


    The removable air ring nut is knurled and allows precise adjustment from completely closed to fully open, I think it can also be found as a spare part and allows you to screw both the RBA and all the UNI-Coils available on it.

    12.jpg


    13.JPG


    An overall photo of various spare materials including the 5 coil blister packs (0.3Ω 0.5Ω 1.0Ω), the cartridges / Pod, the RBA and the air adjustment ring nut.

    14.jpg


    UNI RBA:
    The Rba kit sold separately uses a screwdriver, spare screws, cotton, air adjustment ring nut, pre-assembled coil and threaded bell.

    The deck has two sealing orings, a 2mm diameter under-coil hole, the cross screws although small are not a problem and the coil leg are effectively stopped by the two side feet, the two cutouts for the cotton have been chosen for this deck instead of the usual buttonholes.

    The threaded bell has an internal truncated cone profile of 9x8mm, the chimney is incorporated into it and has a 4mm hole and an o'ring.

    In the last image we can see the air adjustment ring nut that can be screwed directly to the RBA module and to the interchangeable coils (it is the same), note also the slots containing the cotton left free by the deck / chimney union.

    Important note: In the sample at my disposal, the 510 adapter was not present in order to regenerate on any electronic box, OXVA informed me that the specimens for sale will be equipped with it.

    15 ecf.jpg


    OXVA Origin Exploded View:

    16.jpg


    Photon Chip:

    The Photon chip has a useful function to avoid incurring premature burning of the coils, in practice it reads the resistances and prevents setting an inappropriate and excessively high Wattage.
    These are the safety protections:
    10s timeout protection
    Short circuit protection
    Over discharge protection
    Overload protection
    Overcurrent protection on the MicroUSB port

    17.JPG


    How OXVA Origin works:

    The 0.69 "Oled display includes all the information useful for vaping safely, on the left shows the Watts, in the center the Volts and the Ω, on the right the graph on the residual charge.

    Five clicks to switch on accompanied by the welcome message, five clicks to switch off with the goodbye message.

    The power is adjustable with the only selection button, reached 40W (power Max) and pressing the button again the adjustment restarts from 5W.

    By pressing the adjustment button and the fire button together, we lock / unlock the mod including the delivery.

    When inserting a new coil, the display shows New-Coil confirm with the selection button and the maximum wattage allowed will be automatically adjusted, of course you can go down but not go up by W to avoid burning the cotton.

    18.JPG


    Final considerations:

    In the panorama of compact pod mods with 18650 battery in my opinion the new OXVA Origin fits very well and deserves to carve out its own space of success, on its side it has very small dimensions, easy handling, quality coil, good adjustable airflow and valid accessories.
    You judge the OXVA origin together with some noble competitors.

    19.jpg


    The Photon chip is quite minimalist in fact there are only two buttons on this mod. The screen is small, it has no puff counter, no adjustable curve, brightness settings, etc., an advantage of such a minimalist chip is that the battery life is remarkable and above average.

    The "Intelligence-match" function that regulates the power when inserting a new coil, I find it very useful to avoid premature cotton burns.

    0.3Ω can be "pulled" at maximum power (40W) and is in fact set by default by the chip at this power.

    The default 0.5Ω is blocked at 25W but also works well at 15W

    Using any of the mesh-coils from Flavor that is 0.3Ω or 0.5Ω, for a mod that only reaches 40 watts of power, the clouds of steam created are dense and of impressive size but these coils have been designed to offer great performance at low wattages, therefore without requiring too much power from the 18650 cell to the full advantage of its autonomy.

    The 1.0Ω coil is specific for MTL and the chip allows its use at max 15W, with this wattage and with the open air-flow it is impressive !!! it almost looks like a cloud, closing the buttonhole and vaping at 10W the shot closes a lot, but what I liked above all is its speed of response without any delay to the fire, characteristics also common with the other coils, smooth shots like the butter and rich in aroma, but from a coil for MTL I did not expect it, I think it is thanks to the Photon-Chip, even at 10W the shot remains immediate as a response, clean, smooth, aromatic and without bubbling, nothing to say even so it works well.

    With all three Coils I did about a week each with constant performance without a drop in flavor and using different flavors in 70/30 and 50/50 liquids.


    Pro:

    - Ergonomic design
    - Small dimensions
    - Photon chip reactivity
    - Above average battery performance
    - Long-lasting highly aromatic coils, flexible in use at different W and with different liquids
    - Low Wattage Flavor Yield
    - MTL yield very flexible from closed to open

    Tips:

    - Small liquid window, a problem for older people with weak eyesight
    - Small fire button

    20.jpg


    Ultimately I would recommend it to beginners and even veterans, the Pod OXVA Origin 5-40W system is compact and carefully designed and sized around an 18650 battery, it uses a good chipset with a pod system equipped with very valid interchangeable coils.


    I thank Oxva for offering me the opportunity for this test: https://www.oxva.com/product/origin/
     
    • Like
    Reactions: Fredman1

    Frenkyou

    Ultra Member
    ECF Veteran
  • Apr 26, 2019
    2,049
    2,165
    56
    italy
    www.svapo.it
    Update

    OXVA UNI And OXVA X RBA kit:
    The Rba kit sold separately contains:
    - RBA base
    - Threaded bell
    - 510 adapter to initialize the coils on any electronic mod
    - Premade coil Ni80 0.6Ω 27Ga 2.5mm 18-23W
    - Screwdriver
    - Replacement screws
    - Cotton

    1.jpg


    2.jpg


    Installation OXVA UNI RBA:
    Below we can see the RBA mounted on electronic Mod through the 510 adapter and the various construction phases.

    3.jpg


    Note: The air ring nut for the RBA is the one supplied in the kit for the pre-made Uni coils.

    4.jpg
     
    Last edited:
    Status
    Not open for further replies.

    Users who are viewing this thread