vaping apocalypse
Jenny4u asked me
“Bishopheals I enjoyed watching your videos. I am pleased to say I bought a Penelope and a GGTS. How do I make a 3.5 ohms resistance wire with 32 gauge kanthal? Also how can I make the draw tighter? Any suggestions?”
Hello Jenny4u welcome to the GG familia. Be sure to take the GG pill and listen to the prophet IMEO for further vape enlightenment.
Resistance 32 gauge wire measure 3 inches and cut it. This will give you 3.5 ohms. After its heated it may drop as you saw in video. I would suggest maybe cutting 3.25 inches and see when it heats up it stays at 3.5 ohms.
Tip on producing tight draw on Penelope with GGTS.
As you may or may not know Penelope was made for Proteus. Yet we can use it for GGTS. Imeo has not made a GGTS base for Penelope nor does he plan to. So we need to use an adapter. The adapter I used was one 510-901-901-510.
In the video I illustrate how to tighten the draw by losing the GGTS cap till it touches Penelope’s Base. Then leaving air control locked you try to vape and she will not be able to draw anything. Now you can use the air control by opening it. If you test a draw now you should be able to take a draw and blow the back into Penelope and you should see smoke coming out of the vent hole as shown in video.
batteries purchased through Clouds of vapor Please use AW IMR 18650 batteries for safety and I suggest getting a fuse to protect yourself even more. Easily obtainable through Clouds of Vapor.
Tankometer purchased through clouds of Vapor
Ohms reader purchased through Clouds of Vapor.
PS be sire to click on youtube and subscribe for upcoming videos and goodies.
Jenny4u asked me
“Bishopheals I enjoyed watching your videos. I am pleased to say I bought a Penelope and a GGTS. How do I make a 3.5 ohms resistance wire with 32 gauge kanthal? Also how can I make the draw tighter? Any suggestions?”
Hello Jenny4u welcome to the GG familia. Be sure to take the GG pill and listen to the prophet IMEO for further vape enlightenment.
Resistance 32 gauge wire measure 3 inches and cut it. This will give you 3.5 ohms. After its heated it may drop as you saw in video. I would suggest maybe cutting 3.25 inches and see when it heats up it stays at 3.5 ohms.
Tip on producing tight draw on Penelope with GGTS.
As you may or may not know Penelope was made for Proteus. Yet we can use it for GGTS. Imeo has not made a GGTS base for Penelope nor does he plan to. So we need to use an adapter. The adapter I used was one 510-901-901-510.
In the video I illustrate how to tighten the draw by losing the GGTS cap till it touches Penelope’s Base. Then leaving air control locked you try to vape and she will not be able to draw anything. Now you can use the air control by opening it. If you test a draw now you should be able to take a draw and blow the back into Penelope and you should see smoke coming out of the vent hole as shown in video.
batteries purchased through Clouds of vapor Please use AW IMR 18650 batteries for safety and I suggest getting a fuse to protect yourself even more. Easily obtainable through Clouds of Vapor.
Tankometer purchased through clouds of Vapor
Ohms reader purchased through Clouds of Vapor.
PS be sire to click on youtube and subscribe for upcoming videos and goodies.
