Picture of eGo twist with Kanger T3 anyone?

Status
Not open for further replies.

Kent C

ECF Guru
ECF Veteran
Verified Member
Jun 12, 2009
26,547
60,051
NW Ohio US
http://a1.ec-images.myspacecdn.com/images02/123/63df264e312f4211a2faf443bfd20fac/l.jpg

first pic middle PV ego-t with a T3.

Others on that thread earlier....

Get the eGo charger of course. No other extras needed really. Twist and T3 is a good match. You may want to pick up a set of different ohm coils for the T3. Suggest just getting the 2.2 ohm set to start. Then go by flavor. Light flavors do well at 2.2 and 2.5 - you get a bit less vapor. 1.8 (which is what comes in most of the T3's when you buy the whole clearomizer) is good for stronger and medium flavors. 1.5 for espresso/coffee but not much else, imo.
 

Chrispixx

Senior Member
ECF Veteran
Verified Member
Sep 26, 2012
159
49
Buffalo,N.Y.
Skip on the T3's and order some of these:Innokin I6 Dual Coil Clearomizer

In fact order several, i have two and i wish i had 10 more. They come apart from the bottom like T3's to clean but also the tip screws off to fill. They have replaceable coil heads.

One tip.. unscrew the bottom to remove the coil assembly cut the wicks down to 1/4" from the coil, untwist the wicks, fluff, then reassemble. Fill from the top.

The reason for trimming the wicks back is that they are long and there are 4 of them (dual coil), they take up quite a bit of room inside so trimming allows more juice to be added.

I am rocking mine on a stock eGo 1100 mah and they are fog machines. They hold less juice than the kangers but that is a good compromise for how well they work.
 

mainevaper

Super Member
ECF Veteran
Jan 7, 2013
331
114
maine
Here ya go

IMG_20130131_011848_zps8425a535.jpg
 
Status
Not open for further replies.

Users who are viewing this thread