Pictures of your setup

[BluSwatch]

Nice looking! Is that a madvapes tank? I stuck an XL clearomizer in one of mine. I cut the tubing (serrated steak knife) 1/4 inch up from the base, slipped it in from the bottom, and cut another 1/4 inch or so piece of tubing to push down the top cap. It extends up from the top caps to stick my drip tip in.
I think I have a picture ..... hang on -

It's on the GLV - http://www.e-cigarette-forum.com/forum/members/bluswatch-albums-my-stuff-picture70722-tips1.jpg

 

[Tay]

Hay Bluswatch, i have no idea where the tank is from, a mate got it for me. Thanks for the info and the pic of your tank, its very much what i had in mind but im thinking of making the top tube and cap in one piece from delrin with a fill hole and plug in the top cap for easy filling

 

[brian272465]

Here my newest toy

Sent from my SPH-D700 using Tapatalk

 

[erich]

Hi all, ive only been vaping for a couple of months but ive been through a few set ups, i started on a tornado tank and the moved on to some bigger ego batteries with a duel carto tank. A new carto thoughtfully shorted one of my batteries the other morning so i decided to throw together the pass through pictured below out of linen phenolic and brass, im loving vaping at 5v but im finding it nails the cartos, im only getting a few days out of them before they are clogged. Ive just ordered myself a lavatube that should be with me in a few days but im kind of at a loss as to which way to go for a tank/atty, im thinking i may make a tank that can take clearomizers.

Uploaded with ImageShack.us

Very nice!

Here are some ideas of tanks that use CE2 wicks, like a clearomizer:
post4884251

 

[eyebrook]

I like this one of mine



Sturm mod and Line

 

[Tay]

Thanks erich! Eyebrook did you make that? It looks awesome!

 

[eyebrook]

No I bought the mod and the atty from EU

 

[wfx]

Here are some ideas of tanks that use CE2 wicks, like a clearomizer:
post4884251

forgot to say thanks erich. bought the torpedo based on that suggestion. very happy with the result. even works with fluxos if you change the ce2 o-ring.

 

[Crazy Canuck]

You can find it here: Thor's | Hammer | of Thor | e-cig | Mod | Epipemods | Cherry Vape
Out of stock for moment...

From ePipeMods website C Squared- The Worlds Smallest Wooden Box Mod/ Pipe!

The Thor Mod Is Being Discontinued After These Are Sold

I no longer have time to make these since the pipes are always out of stock.

Be happy if you got one of them. Other than that it looks like the only place you'll get one is in the classies

 

[s3anvap3s]

My coworkers call this 'The Detonator'. I'm pretty sure it's going to get me tazed one day. It's a MadVapes 3.7v 2xAA Box Mod with a LR 510 Dual Coil Stainless Mega Cartomizer.

Lol! Now I've gotta get one of those just so I can call it The Detonator!!!!

 

[Huffelpuff]

@hufflepuff What is that on the top on the galileo? an atty tank or something?

Sent from my DROIDX using Tapatalk

ju.is attachment for Galileo - tank for attys or carto.

 

[erich]

My coworkers call this 'The Detonator'. I'm pretty sure it's going to get me tazed one day. It's a MadVapes 3.7v 2xAA Box Mod with a LR 510 Dual Coil Stainless Mega Cartomizer.

No, in general, I wouldn't run around screaming on an airplane while holding a box mod.

 

[yzer]

I've been vaping for seven happy weeks now. Here is the vaping cabinet in the kitchen.

Yes, I like E-Power 14650 (blue LED switch version from Hoosier). After I bought the original starter kit I ordered two more from replacement parts for about the same cost. The third E-Power is still wrapped up as new parts in that plastic bag.

I have chargers on the right side. Six 14650's got charged today at one time, enough to last me the next ten days.

 

[Blakd]

Left 2400 MAH with DCT2 and Pineapple Juice 16mg
Middle 510T with Smokymizer and Clove Juice 12mg
Right 900 MAV vv with DTC2 and Bavarian Cream 16mg

Smokymizers are not worth the money.

 

[yzer]

I've been vaping for seven happy weeks now. Here is the vaping cabinet in the kitchen.

Yes, I like E-Power 14650 (blue LED switch version from Hoosier). After I bought the original starter kit I ordered two more from replacement parts for about the same cost. The third E-Power is still wrapped up as new parts in that plastic bag.

I have chargers on the right side. Six 14650's got charged today at one time, enough to last me the next ten days.

The E-Power 14650 on the left is equipped with the Smoktech 1.7 ohm LR XL (a.k.a. "Resurrector", "Rejuvinator", or "Resuscitator.") On the right is the same E-Power Smoktech 14650 equipped with the Smoktech 2.0 ohm LR XL. Both are from Hoosier e-cig supply.

On the left you see a nickle plated brass drip tip. On the right you see an aluminum drip tip. The aluminum will respond much faster to temperature changes than the nickle plated brass drip tip. The aluminum drip tip will warm up faster and cool down faster, still I prefer the nickle plated brass drip tip.

As to which carto I prefer: the Smoktech 1.7 ohm LR XL is my favorite. However, I often want a cooler vape with nearly the same vapor production. Then I go for the 2.0 LR XL on the right.

 

[yzer]

Oh, yeah. Tupperware is great for storing juices.

 

[Tommy Trauma]

Nothing to fancy here yet. Only been vaping for a couple of months, but am sooooo glad I am, and have completely quit the analogs.

 

[Huffelpuff]

That's a nice set up! Congrats on quitting smoking.

 

[DaBatMan]

QUOTE=s3anvap3s;4962526]Here's a quick peek into my steeping cabinet:

Thank you for the quick peek!!!! Cool stuff!!!! I never get bored of looking at pictures of people's setups!!!

Very cool indeed. Keep em coming!

 

[echos67]

Thanks Everyone for posting your great mods, its alot of help for someone new like myself.

I may not save any money by stopping the analogs but all else being equal I will be around longer to spend more money on vaping products!

I notice alot of people have a substansial supply of juice, I am finding out how important this is right now. I am almost out of juice myself and wishing the mail would be delivered on Sunday. My order was placed on Thursday and shipped on Friday. I am using an EGO to vape instead of the V3.1 to try and save what little I have to last through delivery in a day or 2, hope I make it.