- Status
Another addition to my collection. The iChybrid.
that is a beautiful setup
That is gorgeous! Mmmm...Watch Porn!
Their movements are indeed top end. Thanks for the close up man, great wrist shot!
Here's my main, Marathon GSAR picked up from Goodwill for $20 in not working condition. Took her home, opened it up and just poked the balance wheel a few times until she came to life. Been running like a top ever since. ETA 2824 movement so nothing fancy but she is a workhorse.
Cheers mate!
Same to u and thanks! I own a JSAR and it's an absolutely awesome piece also. I am considering a CSAR in the future. Thanks again and back to the regularly scheduled programming.
Ken
Sent from my iPhone using Tapatalk
Zmax with a 5ml G50, gunmetal anodized aluminum tip (bunch of these tanks floating around with different names.) And my girlfriends Vamo with purple G50 with wooden tip.
Sent from my SCH-I545 using Tapatalk 2
Sent from my SCH-I545 using Tapatalk 2
Seems like a waste of coil to me. Look how long it takes to heat up. Here's my 1.8 ohm 34 gauge 2-over-3 coil.
But I've expressed my thoughts on microcoils before.
I thought the purpose of micro coils is to get something that resembles sub ohms vaping but at a safer resistance. If you're vaping fruit or bakery flavor I personally prefer a cooler vape.
Also, I wouldn't write off micros after just trying bakery flavors on one device. I put a microcoil on my hellfire mini (yes a genesis style atty) with a cotton wick and it gives off TONS of flavor. I had to keep checking my mouth and drip tip for juice but nope... bone dry.
Last edited:
I was a little hesitate to post this story due to its mixed results but I figured most people here are already vapers. So I went out to a bar with some family and friends and as usual I took a few of my basic mods with me. I past around a few of my devises to people to switch them over and oh wait I need pic
So this is pretty much what I took. I managed to convert my brother with the ego mini, they like the mini ego for its ease of use for a refillable. The 808 was the worst of them all as most of them though it was trying to mimic a real cigg but was too big and the metal carto was unconformable. The NJOY king was the biggest hit out of all of them figures seeing as how its the most like a real cigg. Long story short the price of the NJOY swad them away. So my question is are there any other e-cigs with the form factor of the NJOY but is easy to use and cheaper.
Edit: by easyer to use I mean bet then the e-roll not the NJOY
So this is pretty much what I took. I managed to convert my brother with the ego mini, they like the mini ego for its ease of use for a refillable. The 808 was the worst of them all as most of them though it was trying to mimic a real cigg but was too big and the metal carto was unconformable. The NJOY king was the biggest hit out of all of them figures seeing as how its the most like a real cigg. Long story short the price of the NJOY swad them away. So my question is are there any other e-cigs with the form factor of the NJOY but is easy to use and cheaper.
Edit: by easyer to use I mean bet then the e-roll not the NJOY
Last edited:
I just got my kick clone in today and with all this talk of micro coils I decided to give it a try. There not as pretty as some of the ones on here but its just my first attempt.
https://lh3.googleusercontent.com/-...A5n_IX_I/w941-h706-no/2013-08-19+21.32.39.jpg
Any coil you can get a silica wick tripled into is not a microcoil. Note "micro"
Wrap the coil around something thin, like a 1mm needle or something, and use cotton.
nemesis in "hybrid mode". i wish there were 2000mah 18350s... may be in a few years?
I'm going to grab a bottle of that for my toes and the wife's nails
I see your polka-dots and raise you a cute little spider...
Sent via the guys that made Star Trek low tech.
I knew I was doing something wrong it just seemed too easy but if I use a 1mm needle how the h3ll do I tread a 3mm wick through it.Any coil you can get a silica wick tripled into is not a microcoil. Note "micro"
You can't. Micro coils are meant for cotton mainly, 3mm silica sure won't work.
With rolled cotton you just take a small pinch and roll it into a small wick, which you then thread into the coil. Easy!
Traveling companions for the week enjoying the views of the Rocky's from Colorado.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4
Newly acquired MVP with a Jwarp
JBM_3214 by j☺s h_m [busy], on Flickr
JBM_3215 by j☺s h_m [busy], on Flickr
Not bad!
JBM_3214 by j☺s h_m [busy], on Flickr
JBM_3215 by j☺s h_m [busy], on Flickr
Not bad!
Where did you get the Vamo side by side conversion?Drip-Tip = simplicity is beauty.
FOTO WEBCAM
Drip-Tip = simplicity is beauty.
FOTO WEBCAM
Definitely a fan of the Vamo side by side, where did you get it? Might be something easy I can do with my VAMO to bring new life to it
- Status
Similar threads
