- Status
I just got this today. Runs on 2 x 18650's and is variable voltage. I don't know if this has the ever-cool or vari-cool chip in it but I haven't been able to hot box it yet. It holds good voltage on not so fresh batteries. I'm running a Boge 3.0ohm cartomizer on board set at, you guessed it, 5.4V...that's also loaded and unloaded...no drop in voltage as of yet. The mod can run 3.3-6V. I have it set for the juice in it. The LCD and wheel adjuster is inside the mod...wheel is to the left of the LCD and is very easy to move. Firing button is on the back, dead center at the top and is a black horned button.
Last edited:
Was there any reason you went with the 5v batteries? It's an awesome altoids mod!
I just got this today. Runs on 2 x 18650's and is variable voltage. I don't know if this has the ever-cool or vari-cool chip in it but I haven't been able to hot box it yet. It holds good voltage on not so fresh batteries. I'm running a Boge 3.0ohm cartomizer on board set at, you guessed it, 5.4V...that's also loaded and unloaded...no drop in voltage as of yet. The mod can run 3.3-6V. I have it set for the juice in it. The LCD and wheel adjuster is inside the mod...wheel is to the left of the LCD and is very easy to move. Firing button is on the back, dead center and is a black horned button.
They are tenergy 18650's and not the NiMh's that you're thinking of...LOL. Yes they look very close to each other and I always have to check that I grab the right ones.
New GLV "Baby-O" with Trippy Tip ..... Thanks a million Bert! View attachment 71737
It's like a peace pipe! And so jealous about the Odysseus. I want one
Holy cow..............is that a GGTS + OYSSEUS in your pocket or are you just happy to see me
I just got this today. Runs on 2 x 18650's and is variable voltage. I don't know if this has the ever-cool or vari-cool chip in it but I haven't been able to hot box it yet. It holds good voltage on not so fresh batteries. I'm running a Boge 3.0ohm cartomizer on board set at, you guessed it, 5.4V...that's also loaded and unloaded...no drop in voltage as of yet. The mod can run 3.3-6V. I have it set for the juice in it. The LCD and wheel adjuster is inside the mod...wheel is to the left of the LCD and is very easy to move. Firing button is on the back, dead center at the top and is a black horned button.
hairball - You are so lucky!!! I was just looking at them the other day and they were out of stock! Thank you so much for describing it and what you are using! I have a few questions if you don't mind! I understand if you don't answer them all!
1.) Am I right in thinking that all 18650's are 3.7v? Don't you need something higher to run a variable voltage mod that goes up to 6v? Please excuse my noob questions by the way!
2.) Would that mod work with AW 18650 3.7v 1600mah batteries? Is the mAh too low? If you wanted to run it at 3.7v, would you suggest Boge 2.0 LR cartomizers? What made you choose Boge 3.0ohm cartomizers?
Me thinks I'll have to stalk SmartVapes until these are re-stocked. I want! The only other time I stopped analogs before I found vaping, I went through a couple-few tins a day of these.
I just got this today. Runs on 2 x 18650's and is variable voltage. I don't know if this has the ever-cool or vari-cool chip in it but I haven't been able to hot box it yet. It holds good voltage on not so fresh batteries. I'm running a Boge 3.0ohm cartomizer on board set at, you guessed it, 5.4V...that's also loaded and unloaded...no drop in voltage as of yet. The mod can run 3.3-6V. I have it set for the juice in it. The LCD and wheel adjuster is inside the mod...wheel is to the left of the LCD and is very easy to move. Firing button is on the back, dead center at the top and is a black horned button.
Hey Hairball - I got your Peppermint twin today. Haven't used it much yet but the few hits I took at 5.0 were great!
Allow me to introduce you to my family, Darwin, Don, Galileo and Peppermint
Allow me to introduce you to my family, Darwin, Don, Galileo and Peppermint
I have a Lava without a home.
Show off!
Love it Ben, absolutely gorgeous!
Not much yet but I am getting there
Really really wish I still had my purple og Buzz though
Lavatube w/ J Tank
Silver Vein Alpha
Ave and Rawr juices
Cartos/306 attys/510 atty
Multimeter, carto punch, batteries, q tips
Sent from my flashback honeycomb gtablet
Really really wish I still had my purple og Buzz though
Lavatube w/ J Tank
Silver Vein Alpha
Ave and Rawr juices
Cartos/306 attys/510 atty
Multimeter, carto punch, batteries, q tips
Sent from my flashback honeycomb gtablet
I just got this today. Runs on 2 x 18650's and is variable voltage. I don't know if this has the ever-cool or vari-cool chip in it but I haven't been able to hot box it yet. It holds good voltage on not so fresh batteries. I'm running a Boge 3.0ohm cartomizer on board set at, you guessed it, 5.4V...that's also loaded and unloaded...no drop in voltage as of yet. The mod can run 3.3-6V. I have it set for the juice in it. The LCD and wheel adjuster is inside the mod...wheel is to the left of the LCD and is very easy to move. Firing button is on the back, dead center at the top and is a black horned button.
That is cool. Any way to find out what it uses for VV?
- Status
Similar threads
