Hi folks, I listed this item a while back but then decided to keep it. After some more time though, I still feel I am just more of a temperature control kind of guy.
There are a couple important updates to when I last listed this. For one, I ended up getting a 1 7/8" pipe stem, which really improved the vape for me. Nice and warm if I like. I am including both the 3" pipe stem and the 1 7/8" pipe stem in this listing.
The other thing is that I added a custom hammered copper accent to the top of the pipe, to give it a look of burning embers. This really improved the aesthetic for me. Gives it a classic look.
I've decided to include a YFTK KF Prime DLC styled RTA with this listing. It is used in excellent condition. As you can see in the photos, you can use the glass tank or the DLC styled extension. Please note, YFTK says it's DLC coating, but it is not. It is a standard black coating.
I swapped it out with genuine Kayfun Prime o-rings. I am also including 2 genuine Kayfun Prime spares kits.
The Kayfun is really the way to go with this mod for a great MTL vape. That's why I decided to pair the two together in this listing.
This is a mech mod type e-pipe, hand carved out of walnut and custom stained in sedona red with rusticated finish accents. Very old school. Like New condition. The gentleman who makes it, Pipesmith Pipes, no longer makes these e-pipes. So you can't find these anymore.
This mod runs on a single 18500 battery. I am including 2 Efest 18500 batteries with this e-pipe, plus a container of pipe butter to keep things nice and polished.
The Efest Purple 4340 IMR 18500 1000mAh 3.7V Unprotected High-Drain 15A Lithium Manganese (LiMn2O4) Flat Top batteries were purchased from Battery Junction on 1/25/19. They are authentic, and have the anti-counterfeit stickers on them.
The mod can run atomizers down to .5 ohm. Below that, you will trip a self-resetting fuse. Featuring a 22mm Shank, finished with a Stainless Steel Spring Loaded/ Self Adjusting 510 Connector to help draw residual heat away from the coil/ wick/ juice, and also provides extremely durable threading for your 510 connector.
Push-button firing on the face of the pipe - where your thumb rests naturally for comfortable firing of your pipe. No awkward hand position, no auto-firing, no magnets or loose pieces to get lost.
The pipe retail was $235, the batteries were $10, not to mention shipping. The RTA was $22. The spares were a couple a bucks a bag.
I am selling everything for $175, with free shipping for contiguous US.
I am accepting PayPal payment. US only please.
Please note, this is a mechanical mod. Which means you need to know what you're doing in terms of battery safety, proper coil building, Ohm's law, etc... As with any mechanical mod, use at your own risk.
There are a couple important updates to when I last listed this. For one, I ended up getting a 1 7/8" pipe stem, which really improved the vape for me. Nice and warm if I like. I am including both the 3" pipe stem and the 1 7/8" pipe stem in this listing.
The other thing is that I added a custom hammered copper accent to the top of the pipe, to give it a look of burning embers. This really improved the aesthetic for me. Gives it a classic look.
I've decided to include a YFTK KF Prime DLC styled RTA with this listing. It is used in excellent condition. As you can see in the photos, you can use the glass tank or the DLC styled extension. Please note, YFTK says it's DLC coating, but it is not. It is a standard black coating.
I swapped it out with genuine Kayfun Prime o-rings. I am also including 2 genuine Kayfun Prime spares kits.
The Kayfun is really the way to go with this mod for a great MTL vape. That's why I decided to pair the two together in this listing.
This is a mech mod type e-pipe, hand carved out of walnut and custom stained in sedona red with rusticated finish accents. Very old school. Like New condition. The gentleman who makes it, Pipesmith Pipes, no longer makes these e-pipes. So you can't find these anymore.
This mod runs on a single 18500 battery. I am including 2 Efest 18500 batteries with this e-pipe, plus a container of pipe butter to keep things nice and polished.
The Efest Purple 4340 IMR 18500 1000mAh 3.7V Unprotected High-Drain 15A Lithium Manganese (LiMn2O4) Flat Top batteries were purchased from Battery Junction on 1/25/19. They are authentic, and have the anti-counterfeit stickers on them.
The mod can run atomizers down to .5 ohm. Below that, you will trip a self-resetting fuse. Featuring a 22mm Shank, finished with a Stainless Steel Spring Loaded/ Self Adjusting 510 Connector to help draw residual heat away from the coil/ wick/ juice, and also provides extremely durable threading for your 510 connector.
Push-button firing on the face of the pipe - where your thumb rests naturally for comfortable firing of your pipe. No awkward hand position, no auto-firing, no magnets or loose pieces to get lost.
The pipe retail was $235, the batteries were $10, not to mention shipping. The RTA was $22. The spares were a couple a bucks a bag.
I am selling everything for $175, with free shipping for contiguous US.
I am accepting PayPal payment. US only please.
Please note, this is a mechanical mod. Which means you need to know what you're doing in terms of battery safety, proper coil building, Ohm's law, etc... As with any mechanical mod, use at your own risk.