Post Pictures & Details of Bottom Fed RBA setups

[super_X_drifter]

Kinda like Black Chads thread, only dedicated to Bottom Fed setups

Chalice with a 1.65 ohm 14 ga bore coil using 30 ga Kanthal A1. Short wick of Rolled Cotton.

Getting ready to try some Nextel 1/32" XC-116 so I'm kickin up the coil bore in preparation

 

[pdib]

It looks sooooo fat! vape?

 

[pdib]

I got this little stick of dyno-mite.



28g K. 3mm Nextel. Jasl90's Micro-Gen (genisis format; v1.3 "Goosebox")

 

[super_X_drifter]

It looks sooooo fat! vape?

Off the chain. The 1/16" will be slightly fatter but with a Nextel core I think the key is the touching coils and sparse, dense wick. Smaller helps but not as much as tightness maybe?

Nice setup pdib. I'm gonna have to edit that bad boy out if my signature if I ever get on my PC again

 

[SteamDaddy]

ladeefrikkindaadoodaa

 

[super_X_drifter]

Wow, that was a BAD picture! Thanks Steam Diddy. Just replaced it

 

[SteamDaddy]

looks much mo betta

 

[super_X_drifter]

Hornet micro action from back in the day.

 

[pdib]

Ok, here's my go-to build. First time in the RM2/Goosebox. Wick is a bit short; but it works great! One squeeze = two powerful hits (don't seem to need a third).



26g K., 3mm Nextel (the fat stuff), 7/64" ID coil, ~.7Ω?

 

[super_X_drifter]

Ok, here's my go-to build. First time in the RM2/Goosebox. Wick is a bit short; but it works great! One squeeze = two powerful hits (don't seem to need a third).

View attachment 211522View attachment 211523

26g K., 3mm Nextel (the fat stuff), 7/64" ID coil, ~.7Ω?

Vert action, sweet. Goosing is where it's at.

 

[super_X_drifter]

These are the two best RBAs ever made for bottom feeding. RM2 by REO on left and Chalice by Mark Bugs on right.

 

[super_X_drifter]

Nextel xc116 1/32" wrapped with 30 ga Kanthal A1:

 

[super_X_drifter]

Mounting coil on RM2:

 

[super_X_drifter]

Pulled mold:

 

[Commie]

Here's a few old pictures

Reomizer2 with SS wick


Reomizer1 with SS wick


Reomizer2 with sparse micro coil and cotton wick


Hornet with dense microcoil, cotton


Mini A7

 

[Kemosabe]

you guys are good. makes me really want to step up my coil building skills. i wish i wasnt so lazy when it came to building coils. all ive got on my bottom feeder is a stupid little A7.

 

[super_X_drifter]

you guys are good. makes me really want to step up my coil building skills. i wish i wasnt so lazy when it came to building coils. all ive got on my bottom feeder is a stupid little A7.

Kemosabe, thank you. I'm pretty lazy too and have zero patience or mechanical skills. I'm thinking that building these type of RBAs is either very easy or I am just very lucky . I find it fun in a hobby style way too.

 

[Kemosabe]

Kemosabe, thank you. I'm pretty lazy too and have zero patience or mechanical skills. I'm thinking that building these type of RBAs is either very easy or I am just very lucky . I find it fun in a hobby style way too.

youre welcome dude. i envy you. and all the other sick setups i see here. my A7 pisses me off. i tried silica with it, its okay. tried cotton- hated it. tasted great at first but burnt too easily. im back to silica but its still not as good as my gennys. i think i need to put some SS in there.

 

[super_X_drifter]

youre welcome dude. i envy you. and all the other sick setups i see here. my A7 pisses me off. i tried silica with it, its okay. tried cotton- hated it. tasted great at first but burnt too easily. im back to silica but its still not as good as my gennys. i think i need to put some SS in there.

Bro, check this out - it may help. And if you can, get an RM2 RBA from Rob at REO. You will be surpassing my builds in no time flat

RM2 / RBA 2.0 / Reomizer 2 Rebuild Tutorial
http://www.e-cigarette-forum.com/forum/showpost.php?p=9421933

 

[Kemosabe]

Bro, check this out - it may help. And if you can, get an RM2 RBA from Rob at REO. You will be surpassing my builds in no time flat

RM2 / RBA 2.0 / Reomizer 2 Rebuild Tutorial
RM2 / RBA 2.0 / Reomizer 2 Rebuild Tutorial

nice tutorial. i like your wick feeding method using the blunt needle. i never thought of that. looks like abetter approach than the "fold wick in half over a piece of resistance wire then feed through wick" method. that method always seemed to leave gaps between the coil and wick.
i am also noticing how short you trim your wick. mine is likely WAY too long i thought a longer wick would have better juice flow for some reason. its probably quite the opposite now that i think about it.

man i really gotta get better at my dripper building. im satisfied with my geny builds (except for SLR- i cant do that yet), but the drippers are more difficult for me for some reason. probably because i started building on gennys.