And what does it show when you up the voltage?
Locks at 3.8 and shows 3.8 (in the case of the 1.5 DC)?
- Status
And what does it show when you up the voltage?
Locks at 3.8 and shows 3.8 (in the case of the 1.5 DC)?
Was the carto rated or metered at 1.5 Ohm. Could be it was just rated. Personally I dont find it very usefull to work with the results from a vendor, who has to defend his product, and will be more resistant publishing other results who dont benifit his product. Don´t you think so?
I like to state that IMHO the Buzz pro is a great product, and the company is well known for their good craftmanship. Also I have no reason to think that what they publish isn´t true. But the producer is the one who chooses what he publishes and what not, other then a independent tester who is more likely looking to find the flaws.
I like to state that IMHO the Buzz pro is a great product, and the company is well known for their good craftmanship. Also I have no reason to think that what they publish isn´t true. But the producer is the one who chooses what he publishes and what not, other then a independent tester who is more likely looking to find the flaws.
I agree with you, one must take vendors talk with a pinch of salt.
But I have a buzz pro and already verify that.
The concept of the notcigs pcb is quite different from the normal booster (1 battery) that lavatube and provari works.
Don't get me wrong I love my buzz but I'm interested in having another mod and this low price lavatube may be it - I think today provari only offers a solid construction as strong point but is quite exceeded in things like weight and voltage change simplicity.
Agree with you, that would be better.
Anyway, most of us use the volt selecter and indicator to put roughly the volts where you imagine want to have it, and then fine tune it little up or down, untill it meets your personal vaping needs.
Anyway, most of us use the volt selecter and indicator to put roughly the volts where you imagine want to have it, and then fine tune it little up or down, untill it meets your personal vaping needs.
Hi xuspi,
saw you several times at vapeando.
Can you report something of the VV power here?
I agree that it would be much better if the device showed the actual voltage when something like that happened. I do agree very strongly indeed. Oh, well... One can't have it all, right? Still, I don't think I'll have a load of problems for I'll be using 510 T tanks and I know I can't take them too far. Then, also a 5 v atty, a 6 v atty, 2.5 ohms DCs and regular Boge cartos and I know I can take them all anywhere from 3v up to 6 v, even the regular cartos at 2.6 ohms, I believe (the attys are for dripping as said, that is in case I like them, of course, for I'm not a dripper really).
That sounds really good as long as it's solid - and it does seem to be. I guess it must be the difference between using stainless steel and using metal alloy (aluminum, I believe). There could have been a problem with the black paint being easily scratched but, in fact, it seems to be of high quality.Anyway, the weight makes it far more easy to carry and use, doesn't it?
And there has been a certain lack of people commenting on their tubes here, now, hasn't it?
And there has been a certain lack of people commenting on their tubes here, now, hasn't it?
I just got mine 10 mins ago, and Im impressed by it, early days yet but very simple to use 
, will let you know more once its had a bit of use, just playing with it at the moment
, will let you know more once its had a bit of use, just playing with it at the momentGlad you got yours. And good to know first impression is good.
Just was stalking a German forum, and they said solovapor just got the rest of the tubes in.
But still haven´t got any mail from them. OMG. in two days I will get mine.
Just was stalking a German forum, and they said solovapor just got the rest of the tubes in.
But still haven´t got any mail from them. OMG. in two days I will get mine.
I just got mine 10 mins ago, and Im impressed by it, early days yet but very simple to use
I finally have mine. Very light and not huge at all. My AW 18650 IC protected at 2200 mah is a bit long unfortunately, but nothing special anyway, just like 1 cm longer than it should or so; hence, there's a bit of metal, maybe 1 cm, that stands out, but nothing seems to be going to fall or anything, so it's not a problem. The very small buttons are all black. Only the LED or LCD, whatever it is, turns red. It seems very easy to handle.
I had (have) a regular Boge carto with a Riva, so I gave it a try. At 3.7 with the Riva it's quite alright (the same with the tube, of course) but when it gets to 4.5 it is a bit too much. Now, I'll give it a try with a DC at 2.5 ohms and see where it leads. Just a sec, I'm filling it with some Prime 15 at 12 mg...
Ok. At 3.7 it's like an X Power (even though they say the X Power works at 3.2). At 4.2 it's kinda similar. At 4.5 it's stronger and somewhat better. At 5 it's even stronger, maybe nice for a cup of coffee. At 5.5 it's stronger again and still maintains the taste. Still very good, good TH, good vapour production at 6v. Nice, these 2.5 ohms DCs... It isn't HEAVEN ON EARTH as someone put it in another forum but it's definitely a good thing - the change is smooth and still it exists; I like the change to be smooth because nothing tastes like burned or anything, at least with these DCs.
Now, I'll give it a try with a bit of Dekang's Flue Cured at 11 mg and a 5 v atty... Just a sec... Hmm, it's so oily! Let's see: Hmm, very nice, very smooth, amazing vapour production even though it's PG based. Not a great TH. I guess the TH is bigger with a regular X Power atty for some reason. But the taste is definitely better (say, less sickening - and I do like the Flue Cured taste) than on regular cartos. Watch out for your lips a bit.
Alright, now I'll try the 6 v atty, perhaps with Flue Cured again, just so I can make a possible comparison... Just a sec, I have to finish this FC first... Or then again, maybe not... Let me get the 6 v atty... Jezz, this atty seems to have been DOA, first time it ever happened to me! Grr!
Anyway, these are my very first impressions.
I had (have) a regular Boge carto with a Riva, so I gave it a try. At 3.7 with the Riva it's quite alright (the same with the tube, of course) but when it gets to 4.5 it is a bit too much. Now, I'll give it a try with a DC at 2.5 ohms and see where it leads. Just a sec, I'm filling it with some Prime 15 at 12 mg...
Ok. At 3.7 it's like an X Power (even though they say the X Power works at 3.2). At 4.2 it's kinda similar. At 4.5 it's stronger and somewhat better. At 5 it's even stronger, maybe nice for a cup of coffee. At 5.5 it's stronger again and still maintains the taste. Still very good, good TH, good vapour production at 6v. Nice, these 2.5 ohms DCs... It isn't HEAVEN ON EARTH as someone put it in another forum but it's definitely a good thing - the change is smooth and still it exists; I like the change to be smooth because nothing tastes like burned or anything, at least with these DCs.
Now, I'll give it a try with a bit of Dekang's Flue Cured at 11 mg and a 5 v atty... Just a sec... Hmm, it's so oily! Let's see: Hmm, very nice, very smooth, amazing vapour production even though it's PG based. Not a great TH. I guess the TH is bigger with a regular X Power atty for some reason. But the taste is definitely better (say, less sickening - and I do like the Flue Cured taste) than on regular cartos. Watch out for your lips a bit.
Alright, now I'll try the 6 v atty, perhaps with Flue Cured again, just so I can make a possible comparison... Just a sec, I have to finish this FC first... Or then again, maybe not... Let me get the 6 v atty... Jezz, this atty seems to have been DOA, first time it ever happened to me! Grr!
Anyway, these are my very first impressions.
I'm talking volts. I bought them from Health Cabin. Instead of selling HV attys, they sell attys for vaping at 5v and attys for vaping at 6 v.
But I seem to be having some connection problems of some sort. Like puffing once or twice at times before it actually works, that is after I leave it alone for just a bit. Maybe I should mess around with a clip or something?
But I seem to be having some connection problems of some sort. Like puffing once or twice at times before it actually works, that is after I leave it alone for just a bit. Maybe I should mess around with a clip or something?
Last edited:
Yes I have the same problem with my Bulli A2 so I use a 510 to 510 adapter to avoid fiddling with a paper clip, I have my G-Tank on at 4.2 volts, quite nice , my small buttons are silver and red
, my small buttons are silver and red
yes the voltage change buttons are silver and the on/off led/screen button is red on mine
- Status
