Printed DNA30 Bottom Feeder

[MXBNW]

Thanks this is a big help, will start reviewing this week and hope to get my order in by the end of the weekend.

Looking forward to some tinker time

Hey MX

Build doc is here:

http://db.orangedox.com/llXebm6KVO2xeclsT9/V3.1 Build.pdf

There are a bunch of links on the first page. Video hardware, vendors etc... If you still need printed parts, its looking like Sculpteo in doing the best job right now. Just click through that link, there are a couple of options for the "all in one" model. Select which type of fire button you want (Ball Tact or Alps) and then a High or Low version. You can also mix and match parts if you want different colors. I would recommend selecting the polished option. The parts come dust free and fit much better (less fine tuning needed).

 

[gdeal]

Two of these things are not like the others, two of these things just do not belong...

They were much appreciated gifts. So they get to hang out with the boys......

 

[KurrptSenate]

is one the dna version?

I thought you had a beta pdib too

 

[tiburonfirst]

Hey MX

Build doc is here:

http://db.orangedox.com/llXebm6KVO2xeclsT9/V3.1 Build.pdf

There are a bunch of links on the first page. Video hardware, vendors etc... If you still need printed parts, its looking like Sculpteo in doing the best job right now. Just click through that link, there are a couple of options for the "all in one" model. Select which type of fire button you want (Ball Tact or Alps) and then a High or Low version. You can also mix and match parts if you want different colors. I would recommend selecting the polished option. The parts come dust free and fit much better (less fine tuning needed).

don't forget the 10% discount codes!

Two of these things are not like the others, two of these things just do not belong...

hmpf! .......................

 

[MXBNW]

Discount code? Me love Discounts

don't forget the 10% discount codes!



hmpf! .......................

 

[gdeal]

is one the DNA version?

I thought you had a beta pdib too

No...only one in existence and that went across the ocean.

don't forget the 10% discount codes!



hmpf! .......................

Scultpteo Code: "GDeal" (<--Case Sensitive) for 10% off.

 

[tiburonfirst]

since they are case-sensitive i can't help - didn't pay that much attention

but gdeal managed to snag one for his shop and the other was 'ambassador' for 1st time orders

i'm sure somebody will chime in

 

[OthatGuy]

I believe AMBASSADOR all caps. It it doesn't work lmk.

 

[asdaq]

Gdeal, that wood / printed hybrid from pdib looks pretty special there. Does the wood overhang the end cap on the bottom, and are you privy to how the top fits on it? I'm getting a couple 40 boards and am not sure yet what I want to do with them.

Edit: I found Todd's video and all is clear now, real slick setup!

 

[OthatGuy]

This is my mod with the 3.1 internals going on three weeks of non-stop vaping. The shell is about two months old from my previous v3.0. I only have slight scuff marks on the white internals from the juice bottle and battery change outs. This shell has the Krylon Matte finish. It has gone with me everywhere. Rain...shine, mud...beach, bars.... high speed chases...

Do you remember what krylon matte finish this was? Not necessarily the color but the type? How has it been holding up?

 

[gdeal]

Do you remember what krylon matte finish this was? Not necessarily the color but the type? How has it been holding up?

The shell has Krylon (#1311), still holding up very well. no yellowing.

http://www.amazon.com/Krylon-1311-Aerosol-Finish-Enamel/dp/B005ENZ8CS

 

[gdeal]

OTG...That pic is from exactly three months ago. So I just did a quick wipe down on the out side of the shell and snapped another picture. Other than some wear from my ring on my squonking hand and some resoldering on the brass washer, it looks pretty much the same, just more wear. And I use this almost every day.... Its the long term unit...and still going strong.

 

[OthatGuy]

Very cool my friend! I like that color a lot. What else besides the 1311 did you use?

 

[gdeal]

Thats all. On that unit, I just sealed the outside. Now I put the #1311 on every single part. Inside and out. Light coat on the internal part and both shell interiors. Three maybe four coats on the exterior.

 

[OthatGuy]

Awesome thanks bud!

 

[Yiorgo]

Just an FYI for my follow partners in vapor. The dermstore has koh Gen do Japanese cotton in stock $12 free shipping.... Hurry..... I'm predicting oos by midnight. <br />
http://m.dermstore.com/product_Organic Cotton Pads_53165.htm?xovrid=13r9ptp7oiscnf64gcmjv8f865<br/>

 

[BigLungs]

Just an FYI for my follow partners in vapor. The dermstore has koh Gen do Japanese cotton in stock $12 free shipping.... Hurry..... I'm predicting oos by midnight. <br />
DermStore.com : Kinerase - Obagi - La Roche Posay - Jan Marini<br/>

Have you ordered from them before?

I took the chance and placed an order. Thanks for the heads up!
This stuff is getting increasingly hard to find these days, especially at a decent price.

 

[phibbus]

Gdeal, that wood / printed hybrid from pdib looks pretty special there. Does the wood overhang the end cap on the bottom, and are you privy to how the top fits on it? I'm getting a couple 40 boards and am not sure yet what I want to do with them.

Edit: I found Todd's video and all is clear now, real slick setup!

Is there any chance you'll be releasing the endcaps for printing based on the (apparently very) successful prototype, Gdeal? Along with my other grandiose notions, and in the face of an extremely busy Pdib, I thought I might take a crack at fabricating a shell.

 

[BobC]

OTG...That pic is from exactly three months ago. So I just did a quick wipe down on the out side of the shell and snapped another picture. Other than some wear from my ring on my squonking hand and some resoldering on the brass washer, it looks pretty much the same, just more wear. And I use this almost every day.... Its the long term unit...and still going strong.

I've got 2 Alumides from SW, one DNA 3.1 one Peko, both used all day, every day since I built them, both are holding up great.
Personally, I think the Alumide is the best material (haven't tried resin yet) for durability

 

[BobC]

I got a good Sculpteo story,
Ordered a 34.1 internal, a Peko internal and a Peko low profile button, in one order.
All was going good till they delayed the order cause they had a production error on the button,
Next I know they send the 3.1 internals alone,
Next day they send the Peko internal alone,
Today I got both internals,
Today I get a notification that they shipped the button, by itself,
One order, 3 separate shipments,
How long you think they'll be in business?