Printed DNA30 Bottom Feeder

[BigLungs]

For the Fat Daddy classic 510 inserts, it says something in the description of them(on FD website) that they need to be tapped? What exactly am I tapping threads into?
I didn't see anything about needing a tap in the parts list of the build doc.

Also, why are the Fat Daddy classic 510 inserts only available in sets of 3? I don't need 3 of them.

 

[moresalt]

For this build you won't need to tap the enclosure for the 510 connector.. For other enclosures the length of the base may not be long enough to put a nut on the 510 base. In those cases you would have to tap the hole so that the 510 would be secure.

 

[BigLungs]

For this build you won't need to tap the enclosure for the 510 connector.. For other enclosures the length of the base may not be long enough to put a nut on the 510 base. In those cases you would have to tap the hole so that the 510 would be secure.

I was thinking that was what he meant in the description, just needed to be sure, thank you for the explanation.

I have one last question for now
The 6ml bottles referenced in the build doc are unavailable, and I don't need 50 anyways, are they the same 6ml bottles available from ReosMods?

 

[Rossum]

For the Fat Daddy classic 510 inserts, it says something in the description of them(on FD website) that they need to be tapped? What exactly am I tapping threads into?

They were originally designed to be retrofit into other mods in which the original 510 had gotten stripped or damaged. In order to screw the the classic 510 insert into such a mod, you'd have to tap the original mod. You do not have to tap the printed bottom feeder mod; it's designed to accept the classic 510 insert from the get-go.

However, a 6-32 tap is useful to modify the Delrin insulator in the 510 insert. Such taps are available at any Lowes or Home Depot for about $5.00. See:
https://imgur.com/a/ouV6h

Also, why are the Fat Daddy classic 510 inserts only available in sets of 3? I don't need 3 of them.

'Cause after you build one of these, you'll want more.

 

[OthatGuy]

I wouldn't trust sending anything to fd, I made 4 orders and still didn't get the right parts, really. I'd bet money that if you sent sowing he would lose it or something and you we would never see it again. . .

 

[moresalt]

I have one last question for now
The 6ml bottles referenced in the build doc are unavailable, and I don't need 50 anyways, are they the same 6ml bottles available from ReosMods?

I went to ebay and they don't look unavailable to me. This same vendor sells lots of 25 also, but I'm sure there are others around here that could use more bottles. Is this the link you used?
6ml LDPE bottles

 

[tiburonfirst]

'Cause after you build one of these, you'll want more.

speak for yourself!

 

[BobC]

40 watts isn't enough for Tibs any more, she's eying that 150 watt mod now

 

[tiburonfirst]

my settings remain unchanged! just below 7 watt!

 

[BobC]

but the DNA lights are pretty no?

 

[Cool_Breeze]

my settings remain unchanged! just below 7 watt!

Does that yield room temperature + 26 degrees..?

 

[tiburonfirst]

but the DNA lights are pretty no?

well ........................ green would have been better!

 

[tiburonfirst]

Does that yield room temperature + 26 degrees..?

hush!

and that reminds me of a big mystery - all went well with this setting for a good while (coil at 2.2 ohm). then i walk away for a bit, come back, take a puff and i'm getting a nasty, nasty burned taste mike has no explanation but thinks i need to get going with nickel coils so i can activate temp control.

 

[BobC]

Definitely Tibs, would work best for you

 

[OthatGuy]

I was getting a burned off taste with the nickel so I changed back to kanthal 1 ohm build. Vapin happily. I'll play with the ni200 more when I fell like getting frusterated..

 

[splinter164]

I went to ebay and they don't look unavailable to me. This same vendor sells lots of 25 also, but I'm sure there are others around here that could use more bottles. Is this the link you used?
6ml LDPE bottles

I found a lot of 12 for $10 with free shipping from the same seller
6 ml LDPE Squeezable Soft Plastic Dropper Bottles Lot of 12 | eBay

 

[BigLungs]

I went to ebay and they don't look unavailable to me. This same vendor sells lots of 25 also, but I'm sure there are others around here that could use more bottles. Is this the link you used?
6ml LDPE bottles

No I used the link in the parts list, inside the build doc, and it still shows unavailable.
Redirecting
I know the seller has other listings, but following the official link in the parts list gets you to a removed listing

Regardless, I already have plenty of bottles from my Reo Grand, so if they are the same bottles then I would rather not buy more for no reason.
They look the same to me, can anyone verify that Reo Grand bottles will work just fine? Never mind, I found my answer

 

[moresalt]

I found a lot of 12 for $10 with free shipping from the same seller
6 ml LDPE Squeezable Soft Plastic Dropper Bottles Lot of 12 | eBay

And then for $2 more you can get 25
6ml LDPE Squeezable Soft Plastic Dropper Bottles Lot of 25

 

[Kentastic]

And then for $2 more you can get 25
6ml LDPE Squeezable Soft Plastic Dropper Bottles Lot of 25

And if you just triple the price you can get a lot of 72 bottles that hold even more!!

Squeezable Soft Plastic Bottles Lot of 72!! Super Sunday Sidewalk Sale!! Sunday! SUNday! SUNDAY!!!










These might need some slight modifications to fit into the GDNA.

 

[TyCreek]

After a morning build and now the 3rd battery ... I find DNA40 powering nickel interesting...
Oh so many atties and coil combinations to mess with all over again!
A round of epoxy is setting in this pic

A first quick Ni200 coil ended up near .1Ω on a Divo and works pretty good

Max temperature kicks in to say, a squonk please pretty cool!