Printed Mechanical Bottom Feeder Mod
- Thread starter gdeal
- Start date
- th_trl_thread_readers 0
- Status
This tells me the prices should be in EUR, and converted to USD.
I have one on the way. I'll share my thoughts on it once it's here. I have arthritis so I'm getting one for a couple reasons. First, it's shaped some what like a Dibi so squonking will easier and 2nd battery & juice replacing seems similar to the Dibi which will be easier. Assuming all that's true I'm sure I will enjoy it. That said being a REO owner of those first brick like mods back in 2010 I seriously doubt this 3-D BF mod will be the "REO Slayer" and doesn't matter if it is or isn't. 
Last edited:
I meant nothing personal with that picture I made. I owned Reo's before I ever had Peko's and I will always have at least one Reo. I only put Reo Slayer on top of the picture because my third Peko "slayed" the Derringer right off the Reo. I just meant it to be funny. Definitely nothing against Rob he does miracles for us. Heck even look at my forum name, I'll always have a love for Reos Mods. 2 months ago I had the chance to build a Peko and now I've got 3. They are really really awesome.I have one on the way. I'll share my thoughts on it once it's here. I have arthritis so I'm getting one for a couple reasons. First, it's shaped some what like a Dibi so squonking will easier and 2nd battery & juice replacing seems similar to the Dibi which will be easier. Assuming all that's true I'm sure I will enjoy it. That said being a REO owner of those first brick like mods back in 2010 I seriously doubt this 3-D BF mod will be the "REO Slayer" and doesn't matter if it is or isn't.
You'll enjoy yours "for sure" Unsure!
-Mark
I didn't think you did.
REOs are not for everyone and doubt you can find anyone who owns a REO that does not have/use/like another PV. I really liked the Dibi and never would have sold it if I knew the price would shoot up 2 days after I did.
I would never have bought one of these if I thought I wouldn't love it.....btw.....I'm tired of calling it "it", "these" etc. What the heck is the name of this mod? 
I didn't think you did.
Unsure, I thought I was in the wrong thread for a minute. Good to see you here.
My Trio <3
-Mark
LOL! I think you should put "Reo Slayer" in graffiti on one of the other PEKOs! LOL!!!!!
Pauly3
Sent from my iPhone using Tapatalk
ok...getting closer....here are all the kids lined up...just waiting to get some 5ml bottles in next week to confirm dimensions. Xtreme101 came through on a good option.
26650, 18650, 18500 and 18350. The 18xxx series uses all the same hardware parts. (except the bottle.)
Holy crap. I think I have some attys that are bigger than that 18350.
Oh my god G deal!! You never let us down! Honestly, i love my 18650's. BUT I gotta buy an 18350 Peko just to have it. That's bottom feeding STEALTH HEAVEN!!! Haha. Wow. As soon as you get that up on Sculpteo shoot me a PM. I'm ordering one.
Edit: plus I have about 20 18350's in my drawer that haven't gotten used since my tube mod days. Some actually still in packaging ha.
Actually G, on the sqounk hole on the 18350 you should make it smaller, in heightwise. That hole is half the size of the mod haha. I think it would look better with a hole almost of the size. What did bottle could you fit in the 350? A 5ml?
-Mark
Edit: plus I have about 20 18350's in my drawer that haven't gotten used since my tube mod days. Some actually still in packaging ha.
Actually G, on the sqounk hole on the 18350 you should make it smaller, in heightwise. That hole is half the size of the mod haha. I think it would look better with a hole almost of the size. What did bottle could you fit in the 350? A 5ml?
-Mark
Last edited:
What about 14xx0 batteries. They would make for a skinnier mod. I have big hands and wouldn't want one but some folks might like a really tiny mod. You would be limited do using cyclones, divos and other small attys. A 14350 with 14mm atty would be very tiny and cute. It would probably only hold 2 ml. but it would be cute.
It would be tiny. But I feel like our current parts kit wouldn't fit into a 14000 series battery...
-Mark
ok...getting closer....here are all the kids lined up...just waiting to get some 5ml bottles in next week to confirm dimensions. Xtreme101 came through on a good option.
26650, 18650, 18500 and 18350. The 18xxx series uses all the same hardware parts. (except the bottle.)
You're trying to kill me aren't you....... I have batteries for all of them.
In my informal testing I haven't found a 14500 that lasted as long as an efest 700mah 18350. Maybe they were fine when people were using 1.7 ohm "low res" stick atomizers, but even vaping at 1.2ohms the 350's would last double the time the 14xxx series batteries would. The drop off was dramatic. Like 20 minutes and you're down to 3.2v. Whereas the 350's would last an hour or more of straight vape time before they were down to 3.5v and really start to lose power. This is just my own testing with a OG Reo mini and an small ego-shaped 14500 mod, vs a GG clone in 350 mode. Both have the same mah listed, but in my experience they were not equal. Of course this was a limited sampling and it could have been my equipment so take it for what it is.
I agree. I saw the same thing only using AW IMRs in my REO Mini Woodvil. I must say using any mod with either batt that small I wood find annoying these days.
My latest order from Sculpteo as of March 11th, the packaging slip had a caution at the bottom that wasn't on my last two orders, it reads: CAUTION: 3d printed objects are not toys and must not be given to children. They must not come in contact with food and drink and SHOULD BE KEPT AWAY FROM ANY HEAT SOURCES OR ELECTRICITY!
Do they not realize our prints use electrical objects and have heat sources on top? And we have all had zero problems.
-Mark
Do they not realize our prints use electrical objects and have heat sources on top? And we have all had zero problems.
-Mark
I have experienced a problem with the 26650 build. The hex that is printed in the underside of the buttons are not recessed enough. They are maybe 1/2 the depth of what the 18650 buttons were and will not stay in when installing... Before anyone asks, yes they were super glued into place!!! I have tried to salvage the 2 buttons I have and they are beyond repair... I will have to order some new buttons, but don't want to in case there is a problem with the print. Is anyone else having the same problem I am experiencing?
Well that freakin blows Mike! Does the 18650 Peko button work with the 26650? Is it same size or bigger? If it's the same size I can send you a button or two from the 18650 Peko's. They are the short buttons though...
That sucks though man, everything went well and works but the damn button. [emoji36]
-Mark
- Status
Similar threads
- Locked
