Protank came apart.

[Texaslimo]

There is a new version of the mini pro tank that is all threaded parts... No glue. Lisa and I had one of the first mini pro tanks in our area which came unglued not long after purchase. Our local vape shop was great about it and replaced it immediately

 

[mightymen]

Pro Tank 1

When screwing on to connector or off, hold it with the lower metal base only. If you hold the glass or top when connecting it then your putting stress where it's glued then sooner or later it will come apart on you.

Or just get the Pro tank 2.

 

[poison_blood]

Good advice thanks!

Am vaping and I love it

 

[Fishtec]

Coil heats the epoxy up every time you Vape mine thankfully are still good to go threads are knackerd but still vapes had mine a good few months now maybe about 4

 

[sawtoothscream]

just happened to my friend friday. both if mine and my brothers are still working good

 

[crxess]

My only complaint about the mouthpiece on the Protank II, is that the gasket, at least the ones supplied with my kit, gives a very lose fit. I'm guessing that a beefier gasket would result in a fewer lost mouthpieces.

That is not what the Gaskets are for
They are replacement seals for the base.

Oh, FOOD GRADE SILICONE - Protank fix - let dry over night.

 

[PhilE]

Love my pro tank 2. Never had an original pro tank but the 2 is working great for me.

I have a question about the mention of the 1.8 coils leaking. What is it about the 1.8 specifically that makes it leak? Is it because the coils are smaller thus allowing more liquid in?

 

[Bill's Magic Vapor]

+ Pro Tank 2
Have 2 more coming vapemail.
Possible issues w/PT2: 1.8ohm might cause leaking, gurgling, juice suck, gack! Use the 2.2 or? My original came with the 1.8 and 2.2. I think they're selling the tank set up with 2-2.2ohm now.
I'm just waiting for a vendor to start selling the replacement parts for the tank.. JUST IN CASE!

You can get the bases many places. I just got two replacement tanks from PotionVapor. Expensive, but they are colored. Also, cigtechs has a new base for the protank II that is quite nice. It's coming along now. I was a big Davide Glassomizer fan, until the PTII. The drip tip on the DG is not sized right, but the PTII is perfect. Great vape, maybe the best clearo vape out there, imho.

 

[JayTater]

That's kind of odd... My PT1 came apart, and both top and bottom seals to the glass were silicone o-rings.. I just cleaned the surfaces and pressed it all back together. Its been producing perfectly now for a month. Actually using it more than my PT2's.

 

[NiNi]

Love my pro tank 2. Never had an original pro tank but the 2 is working great for me.

I have a question about the mention of the 1.8 coils leaking. What is it about the 1.8 specifically that makes it leak? Is it because the coils are smaller thus allowing more liquid in?

This is my experience and a video clip I caught on the web. The 1.8ohm, in combination with the white gasket on it, and the metal raised ring on the PT2 base, causes no or weak draw, then you loosen the base connection to you battery post to get a draw and it gurgles, leaks and you get a mouthful of juice. If you look at the 1.8 and the 2.2 ohm coils, the gasket is different. I get the Kanger Tech coils, don't go through them very quickly, so a 5 pack blister pack will last for 6+ weeks or more, just clean and re-use the used ones and they keep on going....so far. And avoid high VG.

 

[PhilE]

I'm currently running a 25/75 pg/vg unflavored eliquid with no problems so far. I mix my own and stick with unflavored for 90% of my use.

I am however awaiting gotvapes to get their dreamscape back in. I really enjoyed the sample I bought a while go. Their orange dream is good as well.