Provari mini and aspire nautilus. Really hot vapor

[SpeedDemon]

My fiancé bought a provari mini and it came with the pro tank 2. That topper was god awful so I gave her the aspire nautilus that I recently purchased. The first coil on it was doa and giving nasty burnt metallic hits. I put in the extra one that came with it and was getting much better flavor but the vapor is stupid hot to the point it's not pleasant. We both enjoy cool hits, I checked the pprovari and it is on 3.7. Can anyone give me some tips or suggestions?

Thanks!

 

[Smoot]

What is the ohm on the coil and what voltage is the PoVari at??

Edit, I see the 3.7 volts now. Lol

 

[SpeedDemon]

The coil is at 1.8

 

[Smoot]

I'm not familiar with the nautilus (but do agree about the protank being god awful) so beyond it being a too high voltage thing, I'm kind of at a loss..
Have you tried turning it down to 2.9 and going up from there till it gets bad??
Hopefully someone with more knowledge on this tank will come along....

 

[Smoot]

Similar issue here..
http://www.e-cigarette-forum.com/fo...on/519529-thinking-higher-ohms-my-friend.html

 

[keonee]

Bottom coil clearmizers on Protanks do intend to give off a warm vapor. I use the Provari Mini with a Protank 2 or Nautilus Aspire and have it set on 3.7 - 4.0.

Good Luck to You.

 

[SpeedDemon]

Thanks for the help smoot. Lowered the voltage on it and it's hitting cooler. Just not as much vapor. Not a hug fan of the nautilus so once I get a reo I will get her set up with my kayfun 3.1. So far the kayfun has been my most enjoyable topper

 

[Runningw235]

Rebuild the coils on the Nautilus. It's awesome.

 

[Smoot]

You are welcome!!
Glad you have it somewhat fixed....

 

[SpeedDemon]

I am going to try and rebuild the coil that was dead today and see if that helps.

 

[Codz]

I was thinking of getting a nautilus as they appeal to my lazy side (pre-made heads/coils) but i have read a lot of people talking about problems with the stock heads being DOA or leaking / poor vapour and now too hot. At £28.99 (approx $50) here in the UK I'm gonna give them a miss now. I think I'm gonna just fork out the extra cash and get a sofia instead

 

[Glenn_K]

Doesn't the Nautilus have adjustable air flow? An airier vape tends to be cooler, if you haven't tried that yet.

-- Glenn

 

[SpeedDemon]

I was thinking of getting a nautilus as they appeal to my lazy side (pre-made heads/coils) but i have read a lot of people talking about problems with the stock heads being DOA or leaking / poor vapour and now too hot. At £28.99 (approx $50) here in the UK I'm gonna give them a miss now. I think I'm gonna just fork out the extra cash and get a sofia instead

At fist I had a terrible time with this tank. It looks nice and has and has the adjustable air flow but I have had nothing but problems with the heads. Some people have had a great time with them. I personally will not purchase another.

Doesn't the Nautilus have adjustable air flow? An airier vape tends to be cooler, if you haven't tried that yet.

-- Glenn

I have tried all settings on it. Now I am just going to rebuild it and see if that makes any difference

 

[SpeedDemon]

I rebuilt the head and all I can say is omg what a world of difference! I did a single coil that came in at 1.5 ohms and used a cotton wick. All I can say is this is how this device should of came. Great flavor and a nice cool draw. I will say that it made the draw a bit harder even with it wide open on the air setting but I am getting a good amount of vapor and decent flavor for a clearlmizer

 

[Codz]

At fist I had a terrible time with this tank. It looks nice and has and has the adjustable air flow but I have had nothing but problems with the heads. Some people have had a great time with them. I personally will not purchase another.


I have tried all settings on it. Now I am just going to rebuild it and see if that makes any difference

I bought myself a sophia instead today as i have read nothing but good things about them. Sorry to hear the heads are giving you so many problems though.....

I rebuilt the head and all I can say is omg what a world of difference! I did a single coil that came in at 1.5 ohms and used a cotton wick. All I can say is this is how this device should of came. Great flavor and a nice cool draw. I will say that it made the draw a bit harder even with it wide open on the air setting but I am getting a good amount of vapor and decent flavor for a clearlmizer

and glad to hear a little DIY has resolved the issue!