Ive recently changed my cartomizer on my provari to a new boge xl SR one and while everything is fine and vaping is good.... When i check the ohms using the AO function on the provari it reads out 1.3 for a second then jumps to 2.8. sometimes its even given me a LO message....... should i be worried?
- Status
Never mind. 
(My original post commented on firing/then giving a resistance reading and the "Lo" LED function.)
(My original post commented on firing/then giving a resistance reading and the "Lo" LED function.)
Last edited:
There is a LO error that shows up when there's a bad connection or short when checking the atomizer resistance. It's different than Lo.
I've had that error when using a 510 to 510 adapter that wasn't making solid contact.
Make sure your contacts are clean and your carto is screwed in tight making good contact. If that doesn't work try a different cartomizer or delivery device.
Edit: no need to worry, just try something else on top of it.
I've had that error when using a 510 to 510 adapter that wasn't making solid contact.
Make sure your contacts are clean and your carto is screwed in tight making good contact. If that doesn't work try a different cartomizer or delivery device.
Edit: no need to worry, just try something else on top of it.
Last edited:
the L0 i get randomly is def not from one of the functions of the menus on my provari. It is when it reads the Ohm number it will go from 1.3 to 2.4 then L0 or LO. Everything seems good with the vape so i guess its just the cartomizer? The odd thing is, i got paranoid with my past 3 cartomizer and i switched them out all today one after the other, i was getting E1 / E4 / E8 errors constantly, so i dont know if i damaged something. But now everything works and i havnt gotten any errors. Other than the wierd Ohm readings.
The first 3-4 cartomizer were all taken from the same pack that all gave me errors and tasted funny, the first one i took out from a new pack worked like a charm, but is the one with a wierd ohm fluctuation. Could it just be the boge cartos?
The first 3-4 cartomizer were all taken from the same pack that all gave me errors and tasted funny, the first one i took out from a new pack worked like a charm, but is the one with a wierd ohm fluctuation. Could it just be the boge cartos?
I can't find LO, Lo or L0 in the manual, except for the LED function. Is it called something other than an error code?
Last edited:
How interesting. I can't find "LO" in the manual, but it is addressed in the ProVape sub-forum:
http://www.e-cigarette-forum.com/fo...age-when-checking-atomizer-2.html#post4598486
http://www.e-cigarette-forum.com/fo...age-when-checking-atomizer-2.html#post4598486
I don't think its in the manual. When it happened to me I searched like crazy trying to find it.
It's really more of an educated guess on my part (sorry).
When I checked my resistance it'd give me "LO" then I'd fire it and it'd give me "E1" short, every time. I proceeded to remove the 510 adapter and problem solved. Thus, my conclusion of a bad connection/short.
I suppose asking Provape would be right move here.
It's really more of an educated guess on my part (sorry).
When I checked my resistance it'd give me "LO" then I'd fire it and it'd give me "E1" short, every time. I proceeded to remove the 510 adapter and problem solved. Thus, my conclusion of a bad connection/short.
I suppose asking Provape would be right move here.
OP: It is possible you got a bad batch of cartos, tho It's weird.
Don't worry about the fluctuating resistance, sometimes it takes a sec to dial in. The last number it holds is your resistance.
Don't worry about the fluctuating resistance, sometimes it takes a sec to dial in. The last number it holds is your resistance.
The Ocelot:10367181 said:Why be sorry for an educated guess? It was better then mine.
I probably should have mentioned it in my first post.
ninja edit
Last edited:
- Status
Similar threads
