Provari problems

Status
Not open for further replies.
My provari mini 2.5 is killing batteries like crazy! 18500 will last about an hour and a half or so and 18350 like 30 minutes.. This is with. 1.5 ohm kayfun authentic. I don't understand the rave about provaris. My provari is the most non dependable mod that I have. Just bought new aw imr batteries to troubleshoot and it still sucks! ...!!


Sent from my iPhone using Tapatalk
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,077
71
Ridgeway, Ohio

TheKiwi

Vaping Master
ECF Veteran
Verified Member
Dec 2, 2013
7,548
18,586
Durham, North Carolina, United States
Soooo. Definitely clean up:

1) the positive contact inside the tube (it's a circular metal disk-looking thing) with 99% isopropyl alc

2) clean the threads of the end cap and the tube, and reapply a tiny bit of fresh noalox.

Having dirty contacts will kill the battery usable life.

Once when I had super dirty contacts and threads, no matter what batteries I put in em, it registers 3.7 V under the CB menu. Battery life was a couple hours with 18650 aw IMR 2000mah.

Once I cleaned the contacts squeaky clean, bam. 4.2V fresh, and lasts me a full day easily.


Burping out loud using Tapatalk
 

DaveP

PV Master & Musician
ECF Veteran
May 22, 2010
16,733
42,646
Central GA
18350's last me a couple of hours in any mod with a 2 ohm or lower atty. I haven't used 18500s, but 18650s last me about 6 or 7 hours in my Provari, sometimes 8 with a 1.3 ohm wrap on my Kayfun depending on how heavy I vape.

Buy the 2000mah AW lMR batteries from Provape to ensure you get real ones. Some also swear by the 1600mah AW lMRs. Efest 2200mah lMR batts (black and silver) are also good choices.

Provape will fix it for free the first year. Turnaround is about a week from the time you put it in the mailbox. Email Provape customer service for an RMA number.
 
Last edited:

Newportlocal

Ultra Member
ECF Veteran
Jul 14, 2013
2,299
8,112
Orange County,Calif.
Soooo. Definitely clean up:

1) the positive contact inside the tube (it's a circular metal disk-looking thing) with 99% isopropyl alc

2) clean the threads of the end cap and the tube, and reapply a tiny bit of fresh noalox.

Having dirty contacts will kill the battery usable life.

Once when I had super dirty contacts and threads, no matter what batteries I put in em, it registers 3.7 V under the CB menu. Battery life was a couple hours with 18650 aw IMR 2000mah.

Once I cleaned the contacts squeaky clean, bam. 4.2V fresh, and lasts me a full day easily.


Burping out loud using Tapatalk

I have noalox on my threads too. Great stuff. A little goes a long ways.
I know you can buy it everywhere, but I bought the small jar with the brush here. It is handy with the brush. It will last me a long long time.
http://www.rtdvapor.com/noalox/
 
Last edited:

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,665
1
84,896
So-Cal
Wonders about:

Power setting
Amount of Use


Maxed out, chain vaping with fairly long draws does nothing for battery life.
Everything comes into play and must be considered in determining if there is actually a problem.
Maybe what is needed is a proper extension and High mah. 18650's.

This seems like one of the 1st Question one would ask when someone posts about Battery Run-Time.
 
Status
Not open for further replies.

Users who are viewing this thread