QCS??? CUBIS...

[Ethan diy]

Hi all just changed the cotton on my Qcs coil for cubis pro... did everything it showed on youtube but theres no contact.. (it shows on the battery no atomizer) anyone know what im missing.. i cleared the cotton from the top and bottom... would appreciate anyones help thanks.

 

[Tonee N]

Is there any coil making contact to another part of the base?

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Ethan diy]

Im not sure i understand but basically wrapped the notch coil in cotton inserted it and screwed the coil together and then screwed it into the atomizer... i wasnt sure wether to push the notch coil down inside the body of the coil or not.. cause i understand it needs to touch both top and bottom of the inner body coil .

 

[Ethan diy]

I mean i guess so that there is coil touching the base its a pretty precise coil and atomizer.. (if i understand what you mean) {this is my first time rewicking a coil)

 

[Tonee N]

There could be cotton blocking one end of the notch coil from making contact. Hth

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Ethan diy]

I dont know i really kept the ends clean .. ill rewick again and be extra careful now.. hope it works.. thanks again tonee

 

[Tonee N]

Hopefully that's what it is, otherwise it would be the connection between the coil and the 510 in the tank and/or the tank and your mod.
I've had different tanks and coils read "No atty" after putting a new coil in, unscrewed the tank, hit the fire button, then screwed the tank back on then it worked. These things get finicky at times.
Hth

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Ethan diy]

Thanks it seems ok for now we'll see how long that lasts... really appreciate thank you!

 

[Tonee N]

No problem. Glad to help.
We all go through these little issues.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Ethan diy]

 

[ChelsB]

Do you have any issues with spit back or gurgling with this tank? I constantly had those issues! I could never's figure out how to correct it so it's just sitting being unused

 

[Ethan diy]

Yup definitely issues with spitbacks... the solution is to close the air valve so that at most only two squares are open.. that solves it... on the other hand i myself am missing something i cant get the qcs coil to work after rewicking it always shows no atomizer.. anybody have a solution? (Please)

 

[ChelsB]

Yup definitely issues with spitbacks... the solution is to close the air valve so that at most only two squares are open.. that solves it... on the other hand i myself am missing something i cant get the qcs coil to work after rewicking it always shows no atomizer.. anybody have a solution? (Please)

I don't have the solution, but I've subscribed to this thread. Hopefully, we'll figure something out together!

 

[Ethan diy]

Hope so! Thanks!!