Quality 3.7v Box Mods from $19 5v Box Mods from $28

Status
Not open for further replies.

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
Man, fast shipping!

I think I paid on sunday night and my mods are being delivered today (wed.)! Really excited to get a 5v device that doesn't have to be plugged into an outlet lol.

I have a quick question hopefully someone can answer for me...

If I use aw imr 14500s in the 5v box could I run lr dc cartos? I know the ultrafires shut off with anything lr but not sure about imrs. Either way its no biggy, I just like to use the same attys / cartos when I can.

I hope someone can answer this for you. Glad your mod is arriving today.
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
Hey Studio, check out foxyboxmods also at myboxmods.com - Home. Its an older site that I have. My website traffic hits quota a few days before the end of the month. I dont have credit card processing, and most of the info on the site can be found in post number one.

If you need credit card processing, Smoktek.com sells my box mods as well.

I offer "alternative" payment options, as well as check or money order. My regular site will be back up tomorrow I believe.

Thanks for your interest.

Steve
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
Who likes this?

100_0233.jpg
[/IMG]
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
JB, I will be on the look out for a Texas flag transfer.


Here is another I made. This is my personal VV, but I have other splatter colors. this one is not a transfer. It is a puffy sticker. We will see how it holds up, but I will not be charging extra for any of these vinyl stickers or transfers. The transfers I will be using a clear coat over them. The splatter will be un-protected, to the stickers could in fact come off, but so far so good.

100_0236.jpg
[/IMG]
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
Sheesh, I almost grabbed Winnie the Pooh decals too. I did grab some Mickey and Minnie ones though :) I also have goofy and pluto as well.


How good you going to be with Tigger? :laugh:

Hey everybody we in the PreVets are going to celebrate Godzilla turning Vet day.
There's also a thread open in the Veteran's Forum to congratulate him. :)
One in the Sandbox for non-vets.

Big early congrats Godzilla!!!!
And come by and say hi to us in the PreVet thread!!!!
 

Cigarman

Registered Supplier
ECF Veteran
Apr 13, 2011
1,990
574
St. Petersburg, FL
smoktek.com
Man, fast shipping!

I think I paid on sunday night and my mods are being delivered today (wed.)! Really excited to get a 5v device that doesn't have to be plugged into an outlet lol.

I have a quick question hopefully someone can answer for me...

If I use aw imr 14500s in the 5v box could I run lr dc cartos? I know the ultrafires shut off with anything lr but not sure about imrs. Either way its no biggy, I just like to use the same attys / cartos when I can.

I don't know enough about the aw imr 14500's to say either way, but what I can tell you for sure is the blue or flame jacketed Trustfire 14500's will run 1.5 ohm dual coils on the 5v box without shutting down. The grey ones shut down below 2ohms I believe. Steve will no doubt correct me if I'm wrong here.
 

Cigarman

Registered Supplier
ECF Veteran
Apr 13, 2011
1,990
574
St. Petersburg, FL
smoktek.com
JB, I will be on the look out for a Texas flag transfer.


Here is another I made. This is my personal VV, but I have other splatter colors. this one is not a transfer. It is a puffy sticker. We will see how it holds up, but I will not be charging extra for any of these vinyl stickers or transfers. The transfers I will be using a clear coat over them. The splatter will be un-protected, to the stickers could in fact come off, but so far so good.

100_0236.jpg
[/IMG]

This is great! If it had a green button it would be perfect :)
 

Cigarman

Registered Supplier
ECF Veteran
Apr 13, 2011
1,990
574
St. Petersburg, FL
smoktek.com
Hmm, ReJuv carto, what is that?

ReJuv is an SLR XL single coil cartomizer that is perfect for the 3.7 box mod and other 3.7v devices. If you like low resistance cartos's but need more throat hit and bigger capacity, this is the one to choose. SLR is Super Low Resistance of 1.7Ω, XL is 45mm extra long, ReJuv is short for ReJuvenator :), Available in black and stainless and should be awesome in tank mods.
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
You cant go wrong with the IMR's, but I do not have experience with them at 5v with a dual coil. I thought dual coils were made for 3.7v devices anyway. I do have some flame jacket trustfires here. I will try to test them out today or tomorrow on a dual coil. But I have a feeling Cigarman already did :)

If you want a set of the flame jacket batts to try Brian, just shoot me a PM and I will ship them to you free of charge, and if they work for you, you can pay me $10 and I will cover the first class shipping.


I don't know enough about the aw imr 14500's to say either way, but what I can tell you for sure is the blue or flame jacketed Trustfire 14500's will run 1.5 ohm dual coils on the 5v box without shutting down. The grey ones shut down below 2ohms I believe. Steve will no doubt correct me if I'm wrong here.
 

bp400

Ultra Member
ECF Veteran
Verified Member
Jun 18, 2011
2,717
2,514
44
SoCal
I don't know enough about the aw imr 14500's to say either way, but what I can tell you for sure is the blue or flame jacketed Trustfire 14500's will run 1.5 ohm dual coils on the 5v box without shutting down. The grey ones shut down below 2ohms I believe. Steve will no doubt correct me if I'm wrong here.

The red didnt work for me. or flame jacket i mean
 
Status
Not open for further replies.

Users who are viewing this thread