question about watts and temp control

Status
Not open for further replies.

Romano Cheese

Master Mod Womper
ECF Veteran
May 24, 2014
1,820
4,275
34
Pittsburgh, PA
Temp control uses Nickel, Titanium or Stainless Steel wire to see changes in resistance and change how much power goes to your coil to reduce getting "dry hits" More watts is just the option to get more power into different Ω ohm coils. You can get the 75W mod and run it at 30 the whole time, or if you get a different tank or atomizer with a different resistance coil you might vape that one at 50 or 70W. More power can result in more flavor or clouds but really it comes down to your coils.
 

NightShadow

Super Member
ECF Veteran
Sep 30, 2009
542
336
Tacoma, Washington
Here is my take on TC
The goal of TC is to regulate the temperature of the coil, so you can dial it in to just how you like it, and it stays that way. It will take the maximum power the battery has and apply it towards this goal until the battery is at a low enough charge that the mod cannot give you what you want anymore and will need to be recharged. This could occur with %40 of the battery remaining. It probably will not need the max power after the coil is at the temp you set it for, so then goes into a pulse type mode to keep the coil where you set it till you let got of the power button, or reach whatever cutoff timer your mod has.

Another goal of TC is no burnt coils.
You can vape it as warm or as cool as you wish, generally up to 600F or down to 200F.
The flavor will depend on many things, the tank and coil used, type of juice, what settings you have on your mod etc. The best way I can explain this otherwise is similar to cooking a stew, the end result all depends on hows its all put together :)

Generally speaking, more power = more vapor. Higher temperature also = more vapor. More of either = a hotter vape however.

The 75w TC mod I have is more than capable of producing a vape that is MUCH more than I would ever want. Someone that enters cloud chasing competitions would not use what I use, and I would not use theirs either.

Different mods come closer to meeting the goals of TC better than others. Some TC mods will burn a wick. TC is made to not do that so those mods fail at TC. Others meet the goals just fine.

You could browse the TC forum here: Temperature Control
for more information, check out the thread here: E-Cigarette Reviews or just browse youtube for TC mod reviews.

I recently bought a Wismec Presa 75w TC mod and I really like it a lot. I posted a lot about it and a few similar mods in this thread SMOK X Cube mini VS. Koopor Mini?? if that might be use full.

Worst case scenario, you get a new mod, use the same tank you have at the same wattage in power mode and your battery lasts much longer. You would also have overhead room to try other things if you like. Hope this helps and feel free to ask questions!
 
Last edited:

suprtrkr

ECF Guru
ECF Veteran
Verified Member
Jun 22, 2014
10,410
15,049
Cowtown, USA. Where the West begins.
A Big thank you to @NightShadow for saving me all that typing. I haven't a word to add, save to say I have both a Snow Wolf 200W TC machine and an SX Mini M class, which I think tops out at like 60 watts or maybe 80, something like that. Both are excellent pieces of gear and I can recommend them.
 
  • Like
Reactions: NightShadow

edyle

ECF Guru
ECF Veteran
Verified Member
Oct 23, 2013
14,199
7,195
Port-of-Spain, Trinidad & Tobago
Thinking about getting myself something new. I currently have ipv mini 30 watt. I always use it at 30. My question is the one looking at goes to 75 watts and has temp control, what does temp contol and more watts do? Is it more flavor, clouds or what? Thanks everyone and sorry for the dumb question.


1: temp control prevents the coil from getting too hot
2: more watts available means faster heatup time.
 
Status
Not open for further replies.

Users who are viewing this thread