Rba

[Susan2014]

I hope this is the right place to post this. I am new to all this lingo and have been reading till my eyes cross. I am using a itaste vv 3 with a kanger mini protank 3. I would like to go up to a rebuild able tank/coil not sure what you call it. I don't want to change my battery as I really like it, the question is this. Is there a rba out there to fit my battery? That is not so big to kill my battery. I saw a kayfun at one place but the person knew less then I did about them so I did not get it. The reason is I want to be able to rebuild the coil as it looks a lot easier to build then the single and dual coils I am using now. My eyes I think could do this better then the single one. Any help would we appreciated.
Susan

 

[Susan2014]

i hope someone can come in here to help me. Even if I don't speak the lingo yet. PLEASE.

 

[classwife]

Moved to Rebuildable Atomizer Systems from the Modding Forum - Atomizer Mods

 

[FatherTime]

can you give us details? do you care about how often you have to put juice in your atomizer?

 

[Susan2014]

no don't care how often I have to rejuice it. going to find where this was moved. sorry to have posted in wrong forum.
Susan

 

[KurtB]

For the vv3 I would look in to the kayfun mini. I'm waiting on one to put on my epipe as the regulars will be a bit to big. Using the vv3, you will have to be sure to make the coils 1.8 circa.


Sent from my iPhone using Tapatalk

 

[DaveP]

For most, it's about size compared to the mod. If it fits your your battery it will work fine. You can wind any resistance you want on the Kayfun by changing the number of coils, the diameter of the coils, or the wire gauge.

An RBA is more about whether you mind winding your own coils or whether you would rather just buy a pack of factory coil heads and change them when needed. Some people don't like the technical aspect of learning about an RBA and developing the skills to maintain it. In the long run, an RBA is cheaper. A 100' spool of wire will last a l-o-n-g time and a bag of organic cotton balls is cheap. You can make several wicks from one cotton ball.

 

[Flt Simulation]

.... Is there a rba out there to fit my battery? That is not so big to kill my battery.

Susan, It's not the physical size of the RBA you buy that determines how long your battery will last ... It's the coil you have in your RBA and how many watts you are feeding it that determines battery life between charges.

 

[Susan2014]

Thank you all for the info. I can build the coils as I have been doing for the kanger mini protank. I think these will be easier for my eyes. I am not jumping into this as now I will read about the kayfun mini and watch videos on it. I can't always say what my brain is telling me so I am thankful for the help. I hate building the single coils but from what I have seen I think these will be easier for me. I have a ohm meter to test them on once made. Is the kayfun a clone? Does it matter? Thanks again.
Susan

 

[VaPreis]

I'll throw in a vote for the Ivogo Kayfun Mini. It will look and work great on your VV!

Sent from my KFSOWI using Tapatalk

 

[DaveP]

The EHPro Kayfun 3.1 and the KF lite get good press around here. EHPro makes a good clone. The authentic Russian 91% is going to be expensive.

 

[300fury]

Although the kayfun mini may be a good suggestion, I would be discouraged as a newcomer to rebuildables because of the lack of availability of this product.... I would say a kayfun clone would be fine for learning on...... I have 2 ehpro clones that both work great

 

[Susan2014]

I just got it today. I made the coil(it took me awhile) and put in cotton and it was good for awhile but I think I used to much cotton so in the morning I will try again. This is new to me so it will take time.
Thank you all once again for all the great help.
Susan

 

[Susan2014]

This one is the clone. I had learned to rebuild the single coils for my kanger mine protanks. I used silica most of the time. Now I will learn better with the cotton. I don't like the little screws that the wire goes under, BUT I did make a good coil for it and I am happy.
Susan

 

[ElConquistador]

What did you end up buying?

 

[jersey_emt]

I use an Igo-L on my iTaste VV 3.0. Like most rebuildables, it is larger in diameter than the VV and leaves the eGo threads exposed, but an eGo thread skirt takes care of that, making a smooth transition between the VV and the Igo-L.