RDA Round-Table Discussion and Lookout
- Thread starter Mr.Mann
- Start date
- th_trl_thread_readers 0
- Status
I have both, but prefer the normal by far. I use the normal with the air holes wide open, but since I'm on a bottom feeder I have the bottom air inlet blocked. I find it difficult to describe the draw in comparison to other atties, but I can say I do about 2 second lung hits with just a slight restriction. Cloud chasers will of course want more air, but this is perfect for me and no slouch in the cloud department. The Xtr cap was way too much for me and very prone to leaking from the slot, even while closed off to less than half. Something about those three small air holes on each side of the normal cap do it just right for me.
I should add that the smoothest most flavorful vape I've ever had was with the Apollo on a regulated mod using both the side air intake as well as the bottom, under coil air. I lose just a hint of that experience on the bottom feeders since I have to block the bottom air to prevent leaking under the atty. Even still it's my favorite bottom feeding atomizer. But if you're using it as a dripper by all means take advantage of the bottom air flow.
The normal sounds right up my alley. Might have to save up and snag one of these.
ETA: Are you using one of the Leo drip tips with the Apollo?
ETA: Are you using one of the Leo drip tips with the Apollo?
That's the tip I use on my eGo and Cisco Spec atties! Gotta love the ol' school mings! (But mine are SS).
Haven't actually built the Zenith yet, but so far this thing is looking like a truly remarkable job of engineering! Just taking it apart and getting to know all the many pieces. Hell, I am just happy to have an item that is more than an IGO-W version 429!
Kind of excited about this one, but scared to be. More later...will I be dissapointed? Maybe. Possibly. Even probably. But if not, I think the upside of this could be huge.
Edit: Yup, way disappointed!!!!!!!!!!!!!!!!!!!!!!!!! It's no kind of dripper. Toronto was correct.
Kind of excited about this one, but scared to be. More later...will I be dissapointed? Maybe. Possibly. Even probably. But if not, I think the upside of this could be huge.
Edit: Yup, way disappointed!!!!!!!!!!!!!!!!!!!!!!!!! It's no kind of dripper. Toronto was correct.
Last edited:
I'm just waiting patiently for your thoughts! Can't wait. If everything is good I may grab one.
Sent from my VS986 using Tapatalk
I saw that SoV posted a video on FB because people have been snapping the center posts of their Zeniths.
Going to build 'er tonight.
Yep. I wasn't going to touch it until I got info directly from them or until I saw a video. They definitely should've come out with the video first, but it is what it is. Better a little late than never, but it sucks for those that dove in head first and cracked something. Like I always say, check the depth of the pool before you dive in.
Clear, grey, black, silver, silver, black
I like the look and feel of the 2Puffs but, it's a tight draw coming up to a wide bore. Vector's great!
I like the look and feel of the 2Puffs but, it's a tight draw coming up to a wide bore. Vector's great!
Last edited:
They had problems with there eclipse tank too. Either half the Atlantis coils I had wouldn't screw into it or they wouldn't make connection with the bottom pin. Maybe 2 out of a 5 pack worked perfectly. On top of that it was a royal pain to disassemble the tank and all its sections. I will give them credit where it's due, they did send me all new parts free of charge and shipped free as well. But up until that, it was a pain to say the least.
Sent from my VS986 using Tapatalk
Ok everyone here's something I think ALL tugboat lovers will love especially if you like the vector as well. The Blast Sheild from AVLyfe top airflow, fits the torpedo atty and all tugboat editions. I really like this idea but there's no way in HELL I'm paying 64$ for just a cap. That's just ridiculous.Authentic AVLyfe BLAST SHIELD CAP (signed box)
Sent from my VS986 using Tapatalk
Sent from my VS986 using Tapatalk
Last edited:
$64 for the top cap of an already-too-expensive atty? Wow. That would make the Tug like $160!!!!!!! Sorry to be on this price tip lately, but I am just simply amazed at what these makers are charging. But I'd sooner just not buy it than to buy any knock-off.
Don't get a velocity. I also own the stumpy and the velocity and while the velocity is really easy to build on that's about all it has going for it. The flavor is nearly non existent regardless of coil height, airflow options and watts. I really tried to like the velocity but I just couldn't, I put it back on my mod yesterday to give it another chance and a few hours later the stumpy was back on it's throne. I bought the Velocity right after RT released his review of it thinking it would be the "one" but I was disappointed. I really need to stop shopping for vape gear when I'm bored.
Thanks for saving me from myself you guys. I love that this is a thread where, for the most part, people feel flavor comes first. No offense to cloud chasers, but I ain't one and it's hard to know sometimes who's giving the advice.
It's only that much cause of who made it and cause the box is signed. I mean honestly who cares?! I swear these people act like he's a god, give me a break, he's a nobody, 64$ for a freakin cap lol and they'll sell like hot cakes too watch. Back when I first got my tug I woulda loved this cap but the tugboat isn't worth a 64$ cap I'm sorry.
Sent from my VS986 using Tapatalk
Sorry to sound stupid haha but who even makes it? I never pay much attention to the "big" companies or people involved, just look at peformance haha. I would never buy that, for a variety of reasons.
I think I will buy the second last Origen V3 in ONTARIO. I have always wanted one and once I started to watch reviews I was basically sold. Flavor and quality look outstanding. Its going to run me $140 though so I am still thinking on it. Id like someone to tell me about it and sell me haha. Can you run 24g, most people I see use 28 or 26 so I assume larger gauge wire may not fit?
Mr Mann, flavor to me is sooo much more important then clouds. I got nothing against cloud chasers I just know flavor junkies opinions and mine are more likely to line up. It would seem to me an Origen V3 would be right up alot of your guys alley.
I think I will buy the second last Origen V3 in ONTARIO. I have always wanted one and once I started to watch reviews I was basically sold. Flavor and quality look outstanding. Its going to run me $140 though so I am still thinking on it. Id like someone to tell me about it and sell me haha. Can you run 24g, most people I see use 28 or 26 so I assume larger gauge wire may not fit?
Mr Mann, flavor to me is sooo much more important then clouds. I got nothing against cloud chasers I just know flavor junkies opinions and mine are more likely to line up. It would seem to me an Origen V3 would be right up alot of your guys alley.
It's Eric Hutchinson the guy behind Amerivape or AVlyfe or whatever it is now lol. The Manhattan mod they made with the 9,000lb magnets in it. Hahaha sorry I kid about the last part.
Sent from my VS986 using Tapatalk
- Status
Similar threads
