RDA Round-Table Discussion and Lookout

Status
Not open for further replies.

inspects

Squonkamaniac
ECF Veteran
Verified Member
Dec 15, 2014
4,455
10,798
Arizona, Ecuador

Bought one JH.....:)

Item Name Description Qty Taxable Unit Price Item Total
567 The Bo'sun Atomizer SKU: 9000 1 N 45.00 (USD) 45.00 (USD)
Shipping: Flat Rate 5.50 (USD)
Total: 50.50 (USD)

Payment Information
Date/Time: 19-Jan-2016 18:12:31 CST
Transaction ID: 790XXXXXXX
Payment Method: MasterCard xxxxxxx
Transaction Type: Purchase
Auth Code: XXXXB

Merchant Contact Information
SWMO vape shop, LLC.
joplin, MO 64801
US
swmovapeshop@gmail.com
 

67Tele

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2014
2,868
8,947
Austin
Can you comment on the o-rings and if this is the updated version with stronger rings? I heard the first few had super weak o-rings and then they fixed the rest. Not a huge deal and an easy fix, I'm just curious.

Sent from my SM-G925V using Tapatalk

I screwed it on to the Realeaux and lifted. Slides right off. The o-rings for the barrel to the deck ARE weak and need to be replaced or beefed up. The rings holding the top piece on are tight. Once you get yours and know what rings to replace them with I'd like to hear about them.
 
  • Like
Reactions: HeiSINberg

HeiSINberg

Ultra Member
ECF Veteran
Verified Member
Nov 6, 2013
2,206
2,478
39
Groveville, NJ
I screwed it on to the Realeaux and lifted. Slides right off. The o-rings for the barrel to the deck ARE weak and need to be replaced or beefed up. The rings holding the top piece on are tight. Once you get yours and know what rings to replace them with I'd like to hear about them.
Ugh....damnit lol I was hoping these were the fixed versions. Oh well, I should be glad it's an easy fix though. If it's that weak imagine when it gets all juiced up, that thing will fall off by itself. I have a plethora of o-rings just in case so I'm sure at least 1 of them has to fit. If you don't have extras and I do i will send you some for free.

Sent from my SM-G925V using Tapatalk
 
  • Like
Reactions: 67Tele

WharfRat1976

Vaping Master
ECF Veteran
Verified Member
May 31, 2014
4,731
5,980
Austin, Texas
Triple twisted Ti1, 26g, 2.5MMID, 6/5 in my STUMPY on my RX200. Hitting it with a TCR of 0350 at 47watts, 520F. Incredible flavor and vapor. I'm running 4 STUMPYS exclusively right now. 2 poster with all the possibilities.
217736e231a54b42982da4a031bcb8f7.jpg
c76c9974202567acec6785dbb4a26bec.jpg
 

67Tele

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2014
2,868
8,947
Austin
Ugh....damnit lol I was hoping these were the fixed versions. Oh well, I should be glad it's an easy fix though. If it's that weak imagine when it gets all juiced up, that thing will fall off by itself. I have a plethora of o-rings just in case so I'm sure at least 1 of them has to fit. If you don't have extras and I do i will send you some for free.

Sent from my SM-G925V using Tapatalk

Thank you!
 
  • Like
Reactions: HeiSINberg

sig-cmt

Ultra Member
ECF Veteran
Sep 28, 2015
1,088
1,094
HoustΩn, TX
Magma Reborn (MR) in Teflon Black has landed. Machined like the $75 atomizer that it is: Slightly imperfect, but absolutely good enough. Fairly clean when received. Unlike the K24, the MR does not tend to leak when dripping straight through the cap (in between the posts). Had to rewick with longer tails to reach the juice well. Tossed a twisted 24g 316L ~4mm build on it. So far, so good...

magma_reborn_006.jpg
 
Last edited:

67Tele

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2014
2,868
8,947
Austin
Ugh....damnit lol I was hoping these were the fixed versions. Oh well, I should be glad it's an easy fix though. If it's that weak imagine when it gets all juiced up, that thing will fall off by itself. I have a plethora of o-rings just in case so I'm sure at least 1 of them has to fit. If you don't have extras and I do i will send you some for free.

Sent from my SM-G925V using Tapatalk

I sent an email to N8 asking if they have or could suggest beefier o-rings. Like you said not all that big of a deal but, it'd be good to know if anyone else is thinking of getting one.
 
  • Like
Reactions: HeiSINberg

jhhollier

Ultra Member
ECF Veteran
Verified Member
Dec 3, 2014
2,322
5,303
Bought one JH.....:)

Item Name Description Qty Taxable Unit Price Item Total
567 The Bo'sun Atomizer SKU: 9000 1 N 45.00 (USD) 45.00 (USD)
Shipping: Flat Rate 5.50 (USD)
Total: 50.50 (USD)

Payment Information
Date/Time: 19-Jan-2016 18:12:31 CST
Transaction ID: 790XXXXXXX
Payment Method: MasterCard xxxxxxx
Transaction Type: Purchase
Auth Code: XXXXB

Merchant Contact Information
SWMO Vape Shop, LLC.
joplin, MO 64801
US
swmovapeshop@gmail.com
Can't wait to hear your thoughts on it. I should get the Nuevo in on Friday, looking forward to messing around with that. It's really nice to find good, inexpensive authentic attys.
 
  • Like
Reactions: inspects

HeiSINberg

Ultra Member
ECF Veteran
Verified Member
Nov 6, 2013
2,206
2,478
39
Groveville, NJ
I sent an email to N8 asking if they have or could suggest beefier o-rings. Like you said not all that big of a deal but, it'd be good to know if anyone else is thinking of getting one.
Awesome, let me know what happens or if they ever get back to you. Mine won't be here anyway so I can't help out just yet unfortunately. But I'm itching to get it in!

Sent from my SM-G925V using Tapatalk
 
  • Like
Reactions: 67Tele

67Tele

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2014
2,868
8,947
Austin
Awesome, let me know what happens or if they ever get back to you. Mine won't be here anyway so I can't help out just yet unfortunately. But I'm itching to get it in!

Sent from my SM-G925V using Tapatalk

Will do. I won't get a chance to build them until this weekend...and I'm itching already to see how they come out.
 
  • Like
Reactions: HeiSINberg

inspects

Squonkamaniac
ECF Veteran
Verified Member
Dec 15, 2014
4,455
10,798
Arizona, Ecuador
Can't wait to hear your thoughts on it. I should get the Nuevo in on Friday, looking forward to messing around with that. It's really nice to find good, inexpensive authentic attys.

Indeed JH...!!

Received the shipping notice first thing this morning. Can't wait to get it coiled and cookin...!
 
Status
Not open for further replies.

Users who are viewing this thread