Tried this is another area but didn't get any responses so trying here. I got some readyxwick and recoiled my origen v2 running 1.5 ohms "ugly coils" heated them then pushed my wick through and it slid in quite easily so I don't think it's choked. I am getting flavor but I am not getting vapor or any throat hit. I am vaping Blue Voodoo 3 mg 50/50 on a nemmy clone and an evic at 9.1 watts. I don't know what I am doing wrong. My previous coil was a micro coil also at 1.5 with cotton and the same flavor and I had great throat hit with that one. Please help me. Thanks in advance.
ReadyxWick
- Thread starter koriandjon
- Start date
- th_trl_thread_readers 0
- Status
A pic would help, but in my experience that usually means you are not getting good contact with the readyxwick and your coil. I used a 1/16" drill bit to wrap a coil and then thread the wick through. Worked well for me on the 2mm. I also would put a pin through the center on the rxw to open the center up. The ceramic acts almost like a hose. You should be able to see the channel in the center open. To increase th you can also raise the coil some off the deck, however your lack of vapor makes me think it is a surface contact issue. On pic below you can see what I mean by the center channel.
I don't know if those help but that's the best I could take
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
I built a new coil at 1.7 ohms and got rid of the ugly coils
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
I don't have that particular rda but I use the vertical on my Cyclone, and in that case I would move the coil up a little higher than you have it. I normally run at about .7-1.0 ohms so that is naturally a warmer vape with more TH. How is your air flow?
Airflow seems pretty good. Vapor production has picked up since I last posted not sure if it from opening it up or recoiling but still working out the kinks.
I have wanted to like readyxwick because of its longevity. I have never built one that did not have an unpleasant taste to it frequently. My theory, and I'm sticking to it even if you have facts to refute it :>), is that it will not wick liquid fast enough and what I taste is a dry burn. Or, my wire/wick interface is not tight with a dry burn. I keep returning to Sally's rayon. If anyone has a suggestion, I'd like to hear it.
- Status
Similar threads
