I think the Cyclone and RM2 are close and based on price you'd go RM2. You'd choose Cyclone for looks or to have 100% SS. The Divo (BF version) also by VA has a slightly better flavor than the Cyclone or RM2 because of it's small chamber.
Reo compatible RBAs
- Thread starter hildicat
- Start date
- th_trl_thread_readers 0
-
- Tags
- evic fasttech mt baker myvaporstore
- Status
Both the cyclone and RM2 are excellent RBAs. You really can't go wrong with either one. Both vape well and build easy.
RM2 +'s are ceramic deck and wide posts.
Cyclone +'s are SS construction and higher quality. I also find it a plus that you can build on either side of the posts adding flexibility to position it properly on a BF mod. The airhole placement is adjustable because the cap mounts with Orings
For the price you can't get a better vape than an RM2. Vape wise it can keep with up and often beat BF RBAs at any price point.
I find the same to be true about the cyclone and I believe the extra cost is justified by the materials and build quality.
It all comes down to what features are important to you my brother
RM2 +'s are ceramic deck and wide posts.
Cyclone +'s are SS construction and higher quality. I also find it a plus that you can build on either side of the posts adding flexibility to position it properly on a BF mod. The airhole placement is adjustable because the cap mounts with Orings
For the price you can't get a better vape than an RM2. Vape wise it can keep with up and often beat BF RBAs at any price point.
I find the same to be true about the cyclone and I believe the extra cost is justified by the materials and build quality.
It all comes down to what features are important to you my brother
I have a question... Why are there so many people going with bigger RBAs when smaller chambers gives you a better flavor. Maybe someone can explain it to me.
UK brother, Vicious Ant, via their Facebook Group, told me that this UK vendor has BF cyclones
http://e-cigz.co.uk/store/index.php?main_page=product_info&cPath=44&products_id=302
http://e-cigz.co.uk/store/index.php?main_page=product_info&cPath=44&products_id=302
Good question and I've been kicking that one around myself. ..I love ERA's and the iGo S' s but since LP'ing all my grands I've been playing with Nimby's, iGo L's, Atomics, etc... I'm not sure I can really tell if the flavor is any different but I do like the bigger playpen and having to squonk less... Just my 2 cents. ..
Sent using a soup can and a piece of string
Sent using a soup can and a piece of string
That's where I bought a AFC cap from for xmas. Fast ship with good tracking, got here quicker than the order from Indy vapors.UK brother, Vicious Ant, via their Facebook Group, told me that this UK vendor has BF cyclones
Vicious Ant Cyclone Bottom Feed Atomizer [CYCLONEBF] - £44.99 : E-Cigz London, Discount Electronic Cigarette & cheap E-liquid suppliers, Atomizers, Cartomizers, Batteries, GGTS, Ecigs E-Cigs E Cigs E Cigz
Paul, I went back on the FB group and let him know that they were out of stock. He suggested ukecigstore.com.
I haven't checked it out but hoping it works out for you bro
Paul, I went back on the FB group and let him know that they were out of stock. He suggested ukecigstore.com.
I haven't checked it out but hoping it works out for you bro
UKecigstore are only showing top feeders.
Thanks for investigating SX and please let me know if you hear of any other vendors.
Must be a quite popular atti in the UK for Reonaughts.
Hi Paul,
If you have a top feed, I could send you a slotted insulator (PM Me) to swap in and make it BF.
You would need to pop the centre post out, remove the old insulator and then push it all back together (blade screwdriver needed) with the slotted insulator, align screw holes and your father has a brother named Bob.
Cheers
I
If you have a top feed, I could send you a slotted insulator (PM Me) to swap in and make it BF.
You would need to pop the centre post out, remove the old insulator and then push it all back together (blade screwdriver needed) with the slotted insulator, align screw holes and your father has a brother named Bob.
Cheers
I
Many thanks Izan,
I havn't ordered a top feed cyclone yet so will wait a few days to see if the vendors respond to my e-mails regarding new bottom feeder stock.
I will go with the top feeder and PM you if they don't respond and take you up on your offer.
thanks again
I havn't ordered a top feed cyclone yet so will wait a few days to see if the vendors respond to my e-mails regarding new bottom feeder stock.
I will go with the top feeder and PM you if they don't respond and take you up on your offer.
thanks again
Paul, Justin with vicious ant stated that vicious ant is also out of stock on BF cyclones at the moment. Hope that changes soon
I've often wondered why in the day of automated cnc lathes banging out the parts in these rda's...why don't the makers supply both a bf and tf center pin?
Sent using a soup can and a piece of string
Sent using a soup can and a piece of string
I bet BF users are a small % of the market and probably doesn't make sense when competing in the sub $20 range. I agree the premium manufactures charging over $50 should do it.
Looks like Mountain Oak Vapors has the BF cyclone in stock if anyone's interested.
The Cyclone RBA by Vicious Ant
Just ordered another just to make sure. 31 left, get em while they're hot.
The Cyclone RBA by Vicious Ant
Just ordered another just to make sure. 31 left, get em while they're hot.
Last edited:
I hear ya, but kind of a mute point on the sub $20's...they're usually the ones easiest to drill
Speaking of sub $20, the A6 mini from FT arrived yesterday, fit and finish is very nice, also its easy to mod. Well-fitting o-rings, cannot leak, comes with philips screws in the posts, and a smooth drip tip. What you see in the pics is exactly what you get (for a change). The Divo lookalike I ordered got discontinued and they sent me a horrible looking thing instead, I'll have to use it for parts 
- Status
Similar threads
