Reo P 67 prototype

Status
Not open for further replies.

Frenchfry1942

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2014
7,459
14,397
I've never had a Reo. But I have just been snooping as to what I want mine to look like. That is why I was earlier asking about the fire button being on the side for a non-P67. I prefer a "trigger" grip with my index finger on the trigger. Top button just doesn't feel right.

Anyway, when yous change the flavor bottle, do you change the wick? Or, do you just vape it pretty dry and then put a different flavor bottle in?

I have many RTAs for my regulated ones. Just wondering if I am going to end up with 10-12 BF atties.
 
  • Like
Reactions: Debadoo

dbrandt01

Ultra Member
ECF Veteran
Verified Member
Jun 6, 2014
2,548
5,766
34
Alabama
I've never had a Reo. But I have just been snooping as to what I want mine to look like. That is why I was earlier asking about the fire button being on the side for a non-P67. I prefer a "trigger" grip with my index finger on the trigger. Top button just doesn't feel right.

Anyway, when yous change the flavor bottle, do you change the wick? Or, do you just vape it pretty dry and then put a different flavor bottle in?

I have many RTAs for my regulated ones. Just wondering if I am going to end up with 10-12 BF atties.

I was the same about a button being on top, honestly you get used to it and don't even think about it. I'll grab other mods and push the top of the mod not thinking there isn't a button. Although, a trigger fire would be amazing. I don't vape flavors anymore, however I think it depends on your flavors. If you're going from say menthal to something fruit flavor, I would change the wick out. If you're switching flavors, but it's a relatively same flavor profile, it can mix together well. I am rocking one atty on my Reo. I have 2 Reo's 2 atty's I have sitting as a backup. Almost scared to use it as I want to preserve it haha.

When I used to do juice reviews I would always change wick, sometimes 5 times in a video so I could be accurate in my review. Only takes maybe 1-2 minutes at most to change wick anyways.
 

dbrandt01

Ultra Member
ECF Veteran
Verified Member
Jun 6, 2014
2,548
5,766
34
Alabama
Still hoping to get one. May be spending $500 for my dad for Christmas since he deserves it and my pathetic brother and sister doesn't do anything for him, can't even call. Figured a good Christmas for him before he goes on his Key West winter trip, I could get him something he needs/wants. Family (excluding the lame people I have for siblings) come before everything even my channel and mods when I have working mods now haha. Maybe I'll get it on this round or have to suffer seeing people post pics of their P67 and I'd have to wait til the second run.
 

SteamStack

Ultra Member
ECF Veteran
Verified Member
Aug 7, 2014
2,248
5,252
Macomb, MI, USA
I've never had a Reo. But I have just been snooping as to what I want mine to look like. That is why I was earlier asking about the fire button being on the side for a non-P67. I prefer a "trigger" grip with my index finger on the trigger. Top button just doesn't feel right.

Anyway, when yous change the flavor bottle, do you change the wick? Or, do you just vape it pretty dry and then put a different flavor bottle in?

I have many RTAs for my regulated ones. Just wondering if I am going to end up with 10-12 BF atties.

Depends on what wick you use and how picky you are about mixing juice flavors.

I just vape my DIY Flavorless. But others swap the bottle. Some have a different reo dedicated to ea juice they vape. Seems like just swapping attys would do with the bottle swap.

Though I'll say it first before you read it from others.. once you get a reo they will multiply!
 

Frenchfry1942

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2014
7,459
14,397
Okay...right now I assign an RTA to a bottle of juice until it is gone. It kinda came from my trying different RTAs and finding many were good in their own way. So, along with P67, I will need BF atties, a good few. Any particular one that seems to have a conscientious of a good first one for flavor?

I don't mind personal opinions.
 

oplholik

ECF Guru
ECF Veteran
Verified Member
Mar 22, 2011
12,078
33,862
San Bernardino area, So. Cal.
Still hoping to get one. May be spending $500 for my dad for Christmas since he deserves it and my pathetic brother and sister doesn't do anything for him, can't even call. Figured a good Christmas for him before he goes on his Key West winter trip, I could get him something he needs/wants. Family (excluding the lame people I have for siblings) come before everything even my channel and mods when I have working mods now haha. Maybe I'll get it on this round or have to suffer seeing people post pics of their P67 and I'd have to wait til the second run.

Good for you in taking care of your father. :) I may be in somewhat the same boat, except for others not doing anything. Due to my health probs over the last few years, and my recent hip surgery, I owe my wife something really nice for all her help and support. That will need to come first.
 

SteamStack

Ultra Member
ECF Veteran
Verified Member
Aug 7, 2014
2,248
5,252
Macomb, MI, USA
Okay...right now I assign an RTA to a bottle of juice until it is gone. It kinda came from my trying different RTAs and finding many were good in their own way. So, along with P67, I will need BF atties, a good few. Any particular one that seems to have a conscientious of a good first one for flavor?

I don't mind personal opinions.

Rm2 and rm8 I believe it's a derringer clone.
 

dbrandt01

Ultra Member
ECF Veteran
Verified Member
Jun 6, 2014
2,548
5,766
34
Alabama
Good for you in taking care of your father. :) I may be in somewhat the same boat, except for others not doing anything. Due to my health probs over the last few years, and my recent hip surgery, I owe my wife something really nice for all her help and support. That will need to come first.

Thank you. I've been helping my mother too. She had hysterectomy or however you spell it. So I've been spending a lot of time helping her out. She's easy to buy for, my girlfriend is easy to by for. My dad, meh not the easiest task in the world haha. It's usually a "nothing" until he gets drunk and starts ranting about something he wants. Some weight distribution hitch thing I Never knew existed until now. It'd help with him towing a camper.

Okay...right now I assign an RTA to a bottle of juice until it is gone. It kinda came from my trying different RTAs and finding many were good in their own way. So, along with P67, I will need BF atties, a good few. Any particular one that seems to have a conscientious of a good first one for flavor?

I don't mind personal opinions.

What kind of vape do you enjoy? Lung inhale or mouth to lung inhale? Single coil or dual coil? Personally I favor the Loki Lab Odin. There are better atty's to build on though. Easy to build on, good flavor when I vaped flavors. Option for single coil and dual coil builds. There is a derringer clone I want to try on Rob's site. RM8? I believe it is. I prefer lung inhales though.
 

CMD-Ky

Highly Esteemed Member
ECF Veteran
Verified Member
Sep 15, 2013
5,321
42,395
KY
I am not the REO expert but I have found that most BF attys are easier to do a wick change than tanks. Cap off the wick is there ready to be burned slightly and pulled, fewer parts to remove.

I've never had a Reo. But I have just been snooping as to what I want mine to look like. That is why I was earlier asking about the fire button being on the side for a non-P67. I prefer a "trigger" grip with my index finger on the trigger. Top button just doesn't feel right.

Anyway, when yous change the flavor bottle, do you change the wick? Or, do you just vape it pretty dry and then put a different flavor bottle in?

I have many RTAs for my regulated ones. Just wondering if I am going to end up with 10-12 BF atties.
 

DoubleDZA

Senior Member
ECF Veteran
Aug 29, 2014
158
480
South Africa
Okay...right now I assign an RTA to a bottle of juice until it is gone. It kinda came from my trying different RTAs and finding many were good in their own way. So, along with P67, I will need BF atties, a good few. Any particular one that seems to have a conscientious of a good first one for flavor?

I don't mind personal opinions.


Origen Little 16 BF atty is the out right winner for me :thumb:

But theres also other great attys out there, namely:

RM2, Rm4, Chalice V3, Nuppin, Cyclone, Stumpy, Thump
 

Robinowitz

Ultra Member
ECF Veteran
Verified Member
May 27, 2013
2,452
5,751
No. Cal.
Okay...right now I assign an RTA to a bottle of juice until it is gone. It kinda came from my trying different RTAs and finding many were good in their own way. So, along with P67, I will need BF atties, a good few. Any particular one that seems to have a conscientious of a good first one for flavor?

I don't mind personal opinions.
Welcome Frenchfry. There's a great/long thread called "Reo Compatable RBA's" that will also help with your research. I came over to Reo (full-time) after enjoying RTA's for a spell. I was/am amazed with the ease of using a Reo AND the flavor is the best I've ever had. Have no plans on scouting out what's new out there ( just in Reoville).
 

JC Okie

REOnaut
ECF Veteran
Verified Member
Jul 2, 2010
6,511
17,814
Tulsa, OK
RM2 by far and away.
+++++++1 for the RM2.

If you ordered an LP REO Grand, make sure you get the LP RM2 (if you decide to go with the RM2.) The "regular" RM2 has been milled down to fit down inside a regular (not LP) catch cup. It'll work with any REO, but it'll look a little funny on the LP because of its bare midriff.
 

earthrocker*72

Unresolved Status
ECF Veteran
May 20, 2015
96
821
53
Maine
Rock on brother. I got ya covered for when I make my first P 67 vid. I was rapping with ol' Rob last night . My wife tried calling me a couple of times when he and I were talking and I sent her to VM. When I called her after Rob and I finished talking she was like "what was so important that you couldn't take my call" I told her that I haven't talked to Rob in a month or two and I talked to you like an hour ago". Yeah, that went over like a turd in a punch bowl.

But no worries brother T, I'll be shouting you out in the flick bro :)
Sounds great my friend,I will be watching! Hope you are back in the wifes good graces...Someone told me the key to a great relationship...and it works! Ask yourself, Do you want to be right or happy? Shes right and Im happy! goin on ten years now...LOL Keep in touch brother!
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
Anyway, when yous change the flavor bottle, do you change the wick? Or, do you just vape it pretty dry and then put a different flavor bottle in?

I have many RTAs for my regulated ones. Just wondering if I am going to end up with 10-12 BF atties.
lol you might end up with quite a few. There are many that I haven't tried. I did try the Odin danny mentioned, and it's a great atty, but kinda known to not be a good flavor atty. which is fine for him since he vapes flavorless.

If you like small attys, mtl inhales and single coils, the Rm2 is great........ lung hits, dual coils, the derringer style rm8 is my happy place!!! I'll second what everyone else is saying. Or maybe 5th it, lol

As far as wicking, one thing you'll notice with BF rather than dripping.......less is more when it comes to wicking. You want the wick to just barely touch the deck. you'll use a LOT less wick...so it's super quick and easy to change out. No fancy bunny ears etc, and stuffing tons of wick in a juice well.

Danny, and I forget who said they had hip issues.....so nice to see folks taking care of family and appreciating them! Doesn't happen as much as it should these days.
 

fishwater

Ultra Member
ECF Veteran
Verified Member
Sep 22, 2015
1,087
2,329
54
New Hampshire
Yep, I'll have to sixth the RM8 (derringer clone/style) I purchased mine from Reo when I got my mod, I also purchased the RM2 but I've been so happy with the 8 that I haven't even built the RM2 yet. I also have a Mephisto BF that I received in a trade, can't compare to the RM8 in flavor FWIW.
 
Status
Not open for further replies.

Users who are viewing this thread