RM2 build question

[SKYYcamel]

How low (ohm wise) can I safely go with an RM2 single coil build using the red AW IMR 18650 batteries? Thanks!

 

[Bigflyrodder]

Which AW IMR are you using?

The newest ones are rated to 20amps so you can theoretically build down to .21ohms on a fresh charge. That would be absolute max thought, put you right at 20amps.

Personally I like to leave a little headroom with the amp limit but that's what the Ohm's Law says.

 

[SKYYcamel]

They're not the newer ones.

 

[Papa_Lazarou]

What is the MaH rating on them?

 

[TheBikeGuy]

I always go overkill on batteries. They aren't that much more.

 

[SKYYcamel]

What is the MaH rating on them?

2000 MaH........

 

[six]

2000 MaH........

Those are a 10 amp batt. .5 ohm is as low as I would go... a little over 8 amp draw

 

[rudy4653]

I just got some new AW IMR 2200 mah they are- 20 amp

 

[SKYYcamel]

I just got some new AW IMR 2200 mah they are- 20 amp

They aren't too long?

 

[super_X_drifter]

They aren't too long?

No they are the perfect fit. The 1600mah are 15c which is 24 amps.

Here's a vid on this very subject

http://youtu.be/QQbWVHSiltQ

I use the 2200 most of the day then throw in a 1600 if up later in the night. Ima hit the sack now so I don't have to throw in a 1600