I think ideally you want to have your ohms read around .5 ohms or higher for a dna30 even though hana modz specs say .3 on the official evolv website it states .5 , I also put on my friends patriot that was reading .5 ohms and it was firing perfect
S.S. Vape Pre-Order Hana Modz V3
- Thread starter tastyjuice
- Start date
- th_trl_thread_readers 0
- Status
I don't want to vape a KFL on my dna30 I feel like it's a waste since I'll only be able to pump out like 15 watts max unless I want to get burnt hits >.<
I have a Rose V2 coming in soon.. I'm planning to take it up to 20+ watts
I have a Rose V2 coming in soon.. I'm planning to take it up to 20+ watts
Last edited:
I can get about 18-20 watts easy on the taifun GT with no issues
I haven't touched my kayfun in a while, sorry
I haven't touched my kayfun in a while, sorry
I'll try that when this build plays out. Right now though she perfect.
Sent from my SPH-L900 using Tapatalk
12-15watts 8 wrap 26g around 5/64 drill bit equivalent. I don't get enough wicking if my coils are smaller in diameter than 5/64 with cotton.
I'm using twisted 30 gauge at 1.1Ω on a 5/64ths drill bit. it's 7 wraps I believe
That's whack.. I pre-ordered the official dark blue color for the full size hana modz and I get the light blue color.. -___-
I find less is more in regards to the amount of cotton and trying to keep up with wicking. could just be this 50/50 mix as well.
30 watts on a dual coil aqua @ .67Ω is no thing
30 watts on a dual coil aqua @ .67Ω is no thing
In my opinion that is a little low I've found. Your either running running straight off the battery or 26ish or higher regulated. I find the Hana works best in single coil configuration between 1 and 1.2 ohms. It allows me to adjust from 12ish to 30 watts rather than 26-30. The Hana doesn't regulate (buck) down much. It's great going the other way.
Last edited:
On a mech that's about 21 watts with a fresh battery. Got a little headroom for sure to go above that. No problem how's your aqua wick when pushed up to 30 watts?
Hana is a group of idiots. I do not understand how they get I haven't received my mod from me asking why I have a damaged mod. UNBELIEVABLE
Sent from my SPH-L900 using Tapatalk
Sent from my SPH-L900 using Tapatalk
Emailed hana several times about my mod. This is the response I get from there top notch customer service team. Keep in mind I have stated several times to them I have the mod.
Please contact SS Vape, they are aware of their order schedule. They have stated on their website, when orders received will be shipped. We have no knowledge of.your order from SS Vape, you will have to contact SS Vape regarding your order.
Sent from my SPH-L900 using Tapatalk
Speaking of other options (we were speaking about other options, weren't we?)
Anybody know anything about this guy?
Anybody know anything about this guy?
This is the runaround from both sides. I do not understand how I can get two separate answers in one day from the same person.
Sent from my SPH-L900 using Tapatalk
Sent from my SPH-L900 using Tapatalk
Ya I noticed that in their fb page too. They have canned responses they give, but worse they don't read the question so they give the wrong canned response.
Sent from my The Bat Phone using Tapatalk
Nope and that picture looks like a 3d rendering of a mod in a computer. Pretty sure its not a real picture
Sent from my The Bat Phone using Tapatalk
I am done with hana. I will find another dna 30 somewhere else. I wish you guys the best of luck.
Sent from my SPH-L900 using Tapatalk
Sent from my SPH-L900 using Tapatalk
- Status
