Hi guys,
I have a single 18650 Mod, Itaste Arachnid, With a VV Mutant RDA, and i use LG HG2 batteries and ive ordered some Vtc5a Batteries.
I wondered, what would be a considered SAFE build on LG batts (20amp) on a single batt unregulated mod. Currently im using Ni80 5 wrap 26ga.
Hi,. Well ive tried various wires,. Got the mech a year back but wasnt getting the flavour that i do on my reg so havent used it in a while. I just swapped the coils out,. It a mutant rda so legs are opposite, kanth 24ga,. 7 wrap,. Around 0.3 on my calculations,. Figured thst as safe,. About 15amp on LG,. Problem im having is taste,. On my reg im using aliens,. Have for 3 years,. Best taste ive ever had,. 0.21 dual coil 5 wrap,. Obviously thats not gonna be safe really on single batt mech,. But other wires ive ive tried are,. Kanthal round,. Ss316l,. Ni80,. But on building between 0.25 and 0.3, i just cant get good flavour like the aliens. There must be a build or wire that'd hit the spot for me but at same time be safe,. Trying to avoid exotics to avoid mass and slow ramp up to,. Please can anyone recommend a wire and build that'd blow my socks off whilst being safe at same time.
Hi,. Well ive tried various wires,. Got the mech a year back but wasnt getting the flavour that i do on my reg so havent used it in a while. I just swapped the coils out,. It a mutant rda so legs are opposite, kanth 24ga,. 7 wrap,. Around 0.3 on my calculations,. Figured thst as safe,. About 15amp on LG,. Problem im having is taste,. On my reg im using aliens,. Have for 3 years,. Best taste ive ever had,. 0.21 dual coil 5 wrap,. Obviously thats not gonna be safe really on single batt mech,. But other wires ive ive tried are,. Kanthal round,. Ss316l,. Ni80,. But on building between 0.25 and 0.3, i just cant get good flavour like the aliens. There must be a build or wire that'd hit the spot for me but at same time be safe,. Trying to avoid exotics to avoid mass and slow ramp up to,. Please can anyone recommend a wire and build that'd blow my socks off whilst being safe at same time.
I have no way to check im just reliant on the online calc,. Battery drain cslc and coil calc
And yes resistence matching to online calc checked on my 521 tab
Yes bud,. I thought you meant reading Amps,. No i do have a 521 tab which is thankfully accurateI’m confused. So you do have one then?
im just having this relentless struggle to find a build with good flavour,
Thanks ill give it a shot, resist changes on ss, im aware if that but its gonna be safe as resistence goes up when fired,. Ill try for around 0.4Try SSS316L say 26 gauge at around 0.40 using 3 mm ID. I'm thinking it's five wraps but not exactly sure. I tried aiming at .35 and wound up hitting .55 recently. Yep, I followed Steam Engine and checked my wraps, not sure why I was so off. Possibly humidity, barometric here presently. Here being WV.
im aware if that but its gonna be safe as resistence goes up when fired,