Scubagen Mods

[asdaq]

Gtank for several months?!? I hope you mean hybrid mini, lol. I can see what you mean with un rolling the curved wick and not getting it back proper. Mathe as a final autopsy?

sent from my HTC genisis using Tapatalk

 

[UA72Riddle]

No...I killed my Hybrid Mini......turned it in to an all mods Genisis, then busted my tanks. Didn't know they didn't like alcohol baths!

I started making a Genisis tank from keychain flashlights. It was the original idea by STURM prior to the SS G-tank design.

 

[Scubabatdan]

Ok finally got this thing threaded, had to increase the drill size, and use a bit of oil to get it threaded. Am still looking for a place to make the pyrex pieces, no luck so far.
Here are a couple pics:

Dan

 

[lexi60]

That looks extremely nice.
Nice job Dan.
I hope this is something that'll go into production.

Sent from my HTC Glacier using Tapatalk

 

[Dalton63841]

That is gorgeous!

 

[Vtwin]

Hi Dan,

Shoot me a PM about the pyrex. I have a manufacturer that I talked to about making tanks and he is very interested in talking to you about this project.

Steve

Ok finally got this thing threaded, had to increase the drill size, and use a bit of oil to get it threaded. Am still looking for a place to make the pyrex pieces, no luck so far.
Here are a couple pics:
View attachment 52750View attachment 52751View attachment 52752View attachment 52753
Dan

 

[Brazilleon]

Another master piece Dan!!!

 

[Gummy Bear]

That looks extremely nice.
Nice job Dan.
I hope this is something that'll go into production.

Sent from my HTC Glacier using Tapatalk

Only if Dan is the one producing it.

 

[lexi60]

Only if Dan is the one producing it.

Of course. That's what I was meaning.

Sent from my HTC Glacier using Tapatalk

 

[UA72Riddle]

Great work Dan! Can't wait to see it in action.....in my hands! Haha!

 

[Zen~]

Only if Dan is the one producing it.

Or out-licensing it...

 

[Gummy Bear]

Or out-licensing it...

That worked for me.

 

[Dalton63841]

Great work Dan! Can't wait to see it in action.....in my hands! Haha!

Definitely seconded...

 

[perlionsmitnick]

Ok finally got this thing threaded, had to increase the drill size, and use a bit of oil to get it threaded. Am still looking for a place to make the pyrex pieces, no luck so far.
Here are a couple pics:
View attachment 52750View attachment 52751View attachment 52752View attachment 52753
Dan

That's beautiful. I would love to suckle that pink nipple. lmao

 

[mrengles]

Hello everyone,

I've got my ScubaGenv3 wicked and coiled at 2.6 ohms. The wick has been oxidized. My bobas taste great, very clean (best flavor I've ever had) but the throat hit is way to strong. I mean really strong.

I'm using it at 4.2 volts? Am I doing something wrong? Is there anyway to reduce te TH?

Thanks for helping out a genesis newb.

PS. Dan the DSU looks great!

 

[mj64]

Hello everyone,

I've got my ScubaGenv3 wicked and coiled at 2.6 ohms. The wick has been oxidized. My bobas taste great, very clean (best flavor I've ever had) but the throat hit is way to strong. I mean really strong.

I'm using it at 4.2 volts? Am I doing something wrong? Is there anyway to reduce te TH?

Thanks for helping out a genesis newb.

PS. Dan the DSU looks great!

Lower voltage is the only way I can keep the throat hit down and then I am not satisfied with the vapor. So I cant help, but you are not alone!

 

[nicotime]

Hello everyone,

I've got my ScubaGenv3 wicked and coiled at 2.6 ohms. The wick has been oxidized. My bobas taste great, very clean (best flavor I've ever had) but the throat hit is way to strong. I mean really strong.

I'm using it at 4.2 volts? Am I doing something wrong? Is there anyway to reduce te TH?

Thanks for helping out a genesis newb.

PS. Dan the DSU looks great!

If you havent used SS wick before...or just the nature of this type of mod... you might need to reduce your nic level...I know I did...from 36mg to about 20mg now.

I noticed there was some talk of the SS wicks and air entrapment...I dont really think at the minute rate fluid feeds in wicks will cause "vapor lock"....IMO. When I ran SS wick I used a "J" type wick and it worked well...even on the CE2's way back when. One...it will eliminate for sure any chance of an air bubble like in a dual feed wick....two...the short end after the coil will act as an immediate reservoir and may help slightly by the siphon effect...I never had a problem with dry wicks...but again...just my thoughts. Good luck!

 

[lexi60]

Hello everyone,

I've got my ScubaGenv3 wicked and coiled at 2.6 ohms. The wick has been oxidized. My bobas taste great, very clean (best flavor I've ever had) but the throat hit is way to strong. I mean really strong.

I'm using it at 4.2 volts? Am I doing something wrong? Is there anyway to reduce te TH?

Thanks for helping out a genesis newb.

PS. Dan the DSU looks great!

Adding a very small extra air hole in the top cap will reduce TH. And add alot more vapor.
Just line it up with the coil.

Sent from my HTC Glacier using Tapatalk

 

[mrengles]

If you havent used SS wick before...or just the nature of this type of mod... you might need to reduce your nic level...I know I did...from 36mg to about 20mg now.

I noticed there was some talk of the SS wicks and air entrapment...I dont really think at the minute rate fluid feeds in wicks will cause "vapor lock"....IMO. When I ran SS wick I used a "J" type wick and it worked well...even on the CE2's way back when. One...it will eliminate for sure any chance of an air bubble like in a dual feed wick....two...the short end after the coil will act as an immediate reservoir and may help slightly by the siphon effect...I never had a problem with dry wicks...but again...just my thoughts. Good luck!
View attachment 52834

Nicotime,

Thats for the diagram! I have lowered my nic for this build from 18mg to 6mg (thats why i'm so surprised about the TH). Its literally kicking me in the back of the neck every hit, toot, puff what ever you want to call it.

One question, should the short end of the "J" wick go into the juice, or be cutoff before that, so that the end is just above the juice reservoir, and below the coil. (right between them both?)

Just my observation the TH seems to be getting less, and less slowly, but less. Maybe my wick just needs to be a little more seasoned?

THANKS EVERYONE for your suggestions!

 

[asdaq]

Dan, this is really a beauty! Now I'm going to have to go back and look at the plans again and see how it works, as you have got the juice in a different place than I thought /me not following along properly.

sent from my HTC genisis using Tapatalk