Hi i have a releaux rx 2/3 by weismec and not only does it not work with the 3 battery configuration it now also doesnt work with the two. It says check battery but the batteries are fully charged. I also am not able to charge it directly only through external charger.. and nevermind the fact the back panel doesnt stay closed (the shop isnt very helpful even even i had warrenty) does anyone have any experience? Does anyone maybe know of some troubleshooting problem i can take care of? Also please does anyone have please a good recomendation for a mod suitable for sub ohm i currently have the cleito 120 tank... thanks and would really appreciate any help i can get.
Seeking help with realux rx 2/3 weismec
- Thread starter Ethan diy
- Start date
- th_trl_thread_readers 0
- Status
Lets start with the basics.
Are you installing the batteries in the correct orientation + / - ?
What exact batteries are you using?
name brand & any letters / numbers on the wrap to help identify.
Have you verified the batteries are actually charged with a dvom/multimeter?
After you put the batteries in are you turning the power device on?
Did you inadvertently put the power device in stealth mode?
Are you using the correct mode for the wire type in the cleilto head?
There are literally dozens of power devices suitable for subΩ resistances, what are some features you want?
Are you installing the batteries in the correct orientation + / - ?
What exact batteries are you using?
name brand & any letters / numbers on the wrap to help identify.
Have you verified the batteries are actually charged with a dvom/multimeter?
After you put the batteries in are you turning the power device on?
Did you inadvertently put the power device in stealth mode?
Are you using the correct mode for the wire type in the cleilto head?
There are literally dozens of power devices suitable for subΩ resistances, what are some features you want?
1 of my 3 is doing the same with either battery cover. When I bought the 3 last year one new out of the box would only work with the 3 battery door on and the vendor replaced it.
Yup affirmative to all these it actually worked fine for a day or so but now this began... thanks umm features i want i guess onevwould be enough power to fully utilize any sub ohm tank.. also safety wise i would want a good mod.. i guess another feature would be that i could charge it directly or directly and with an external charger but not just an external charger. Thats about all i know if there are any other good features i missed id be happy to hear but it seems like that would be the basics. Thank you really.
Thats a shame and I am sorry to hear your mod is not working. My reuleaux 2/3 has been doing fine for about a year now with one drop onto pavement. With that being said, my buddy back home bought one too and it stopped working, he said he looked up an article or a YouTube video, not sure of which one, and found instructions on how to re-solder the wiring inside his mod because the wires came loose. I would look into that...
Also ensure your reuleaux looks like this and does not have any bending of the housing anywhere, another friend of mine did not have a perfectly straight box, if its not straight, its wrong.
Notice the top of the mod next to the 510 is flush with the battery door and the bottom is also flush. Like I said I have seen a friends with the top where the battery door meets the mod near the 510 pin angled upward.
I am not saying these are your problem, but I would imagine if its not straight, it would affect your battery door.
IMO both should be looked at just to be sure, check your mod, check your soldering.
Sent from my iPhone using Tapatalk
Also ensure your reuleaux looks like this and does not have any bending of the housing anywhere, another friend of mine did not have a perfectly straight box, if its not straight, its wrong.
Notice the top of the mod next to the 510 is flush with the battery door and the bottom is also flush. Like I said I have seen a friends with the top where the battery door meets the mod near the 510 pin angled upward.
I am not saying these are your problem, but I would imagine if its not straight, it would affect your battery door.
IMO both should be looked at just to be sure, check your mod, check your soldering.
Sent from my iPhone using Tapatalk
Mine done this when I used it. It was a wire that had came lose inside.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Status
