Setup for Construction Jobsites?
- Thread starter K Williams
- Start date
- th_trl_thread_readers 0
- Status
I would suggest a Sigelei 100w plus. If you don't have a decent charger, then you'll need that too.
Some of these new tanks are awesome performers but a little delicate so I'm not sure. A good kayfun lite plus v2 clone with the steel middle section would do the job in terms of durability. Maybe others have better suggestions?
Some of these new tanks are awesome performers but a little delicate so I'm not sure. A good kayfun lite plus v2 clone with the steel middle section would do the job in terms of durability. Maybe others have better suggestions?
The only thing I can recommend for a construction site is a metal Reo but it's a mechanical - not VV/VW. You can drop it and you will pop open the door and maybe the batteries will fly out but you can't break it. Internal feed system eliminates all the concern about breaking a top heavy tank. And it's pocket size.
Last edited:
Maybe a hexohm v1 or v2, strong aluminum body. For the tank, there are a number that you can substitute glass for steel. A good number of kayfun styles and even the nautalis and Atlantis have the steel outer guard.
Not sure of the budget you had in mind but the Billet Box, Hexohm, or maybe a e-lvt 30w. There are other options obviously but I was just throwing a few out there.
joyetech eGrip is a tad smaller than a REO 2.1.
I'd go with an eGrip or a REO but you would probably want a REO GRAND for battery life (18650) .....that one is the same height as a business card.
REO is all mechanical and eGrip has circuitry, goes up to 20 watts I think.
I'd go with an eGrip or a REO but you would probably want a REO GRAND for battery life (18650) .....that one is the same height as a business card.
REO is all mechanical and eGrip has circuitry, goes up to 20 watts I think.
My SO is an iron worker as well. He's using an e-lvt with a Kanger Aerotank V2 with the stainless body. Judging from the scratch marks and dents, I'd say it's been kicked around a bit. (He actually just managed to dent the display last week.) He's had it just shy of 6 months and it still runs great. We finally upgraded him to this set up after he kept dropping eGos out his pocket from 20+. The rubber case on the lvt really helps it stay in your pocket.
Hope you find a good set up that works for you.
And remember: for a bigger, better erection - call your local ironworker.
Hope you find a good set up that works for you.
And remember: for a bigger, better erection - call your local ironworker.
Not too sure which of the latest tanks offer stainless bodies and could take some abuse (think the new Kayfun v4 comes with one), but so far as devices go we need a bit of direction to make good suggestions. What power level are you after? What's your vaping style?
I just got an MVP 20 which is tough as nails and cheap enough not to cry over if you did somehow kill it... but it'll only push twenty watts. I'd recommend it in a heartbeat if that's enough for you.
I just got an MVP 20 which is tough as nails and cheap enough not to cry over if you did somehow kill it... but it'll only push twenty watts. I'd recommend it in a heartbeat if that's enough for you.
The MVP's are the only devices that i trust to not only last through the toughest conditions but to never run out of power for days . They have never let me down and i have beaten mine to death while doing construction, surf fishing for three days at a time where i cannot recharge it even if i wanted to and it charges
my other devices while i'm working.
The thing that really blows me away is it's vape quality though, the MVP 20 watt blows my higher powered devices away in the quality of vape it provides , i have yet to find anything as smooth , i mean it's out of this World smooth.
I have an ego one kit to go with me when I'm out in the field. Stainless steel tank with tiny juice level windows. Not a vv but that tiny pv performs like my expensive mods. The .5 ohm coil puts out some serious clouds for a tiny device. Best of all, it's only $50 for the kit. I won't be heart broken if i do break it. I have already abused it so I'll get my money's worth.
The key is having a lanyard and keep it under your shirt / jacket and you don't have to worry about what tank you use .....
Innokin CLK! 1280 - White
Innokin CLK! 1280 - White
I have an elvt and it was too big for work so I went with an aspire cf spinner with a kanger pro tank 3 mini and I modified a fellet knife sheath to hold it no problems. I had a natlus on the lvt and snapped it off right below the air flow control. Was surprised I didn't break the glass just find a place other than ur pocket to keep what ever u go with cuz when u kneel or bend down it ....s them up
Also if noticed the ego fittings seem stronger than 510 except like on the lvt where it has an 8th inch thick beauty ring that killed the nautlus. And pre build coils are nice cuz u can change in a flash if u keep a spare in ur lunch box.
- Status
Similar threads
