Show off your current build
- Thread starter Dopefish
- Start date
- th_trl_thread_readers 0
- Status
Twisted 26g 7 wrap dual vertical coils in Velocity RDA .4Ω, one coil is a little wonky but they heat up evenly. My favorite cloud build. (Sorry about the quality I had to crop it to get it to upload)
twisted 28g, 5 wraps. dual coil on a Royal Hunter clone. chimes in around .33 ohms. decided to try a spaced coil, and got great results so I left it on there. Would love more surface area, might have to try a parallel wrap. Sucks being limited to 50 watts, but I made this for what I have, and I was suprised.
4 strands of 28g twisted together.
10 wraps, 2.5mm diameter. 0.6 ohms
Twisted Messes RDA and Hexohm v2.1
10 wraps, 2.5mm diameter. 0.6 ohms
Twisted Messes RDA and Hexohm v2.1
Hex Ohm 2.1, have the red one myself, absolutely love it.. Nice build too.4 strands of 28g twisted together.
10 wraps, 2.5mm diameter. 0.6 ohms
Twisted Messes RDA and Hexohm v2.1
5 strand 32awg rope twist 1.3ohms Subtank Mini
Twisted 0.6x0.1 flat with 32awg twisted in the flat. 1.5ohms Magma
Three strands of twisted 32awg flat braided together. 0.8ohms Russian 91%v2
28awg dual coil 8:9 wrap one contact one Bow .75ohms Magma
8 wrap bow coil 28awg 1.5ohms KFv4
8wrap 32awg 3.3ohm Phoenix v1
Twisted 0.6x0.1 flat with 32awg twisted in the flat. 1.5ohms Magma
Three strands of twisted 32awg flat braided together. 0.8ohms Russian 91%v2
28awg dual coil 8:9 wrap one contact one Bow .75ohms Magma
8 wrap bow coil 28awg 1.5ohms KFv4
8wrap 32awg 3.3ohm Phoenix v1
28/32 claptons, 6 wraps .24ohm on a CLT2+
Plume Veil with 24G N80, 6 wraps about .25 ohms.
GA Rampage 24G N80 trips @ 6 wraps. .14ohms
Tugboat built for TC. 28G Ni200 6 wraps @ 1/4", .09ohms
Billow V2 28G KA1 duallys 8 wraps @ 2mm, .8ohms.
And a KFL 28G KA1 8 wraps @ 2mm 1.4 ohms.
Working on a Dark Horse with wire twisted by my son so I forget what it is. Ohmes out a exactly 1Ω. Requires 75+ watts and handles 100 but honestly its too intense for me. The flavor is amazing and dry hits are a thing of the past so I get why he, and others, love them but too too much. Rewicking it now and good heavens was it a, uh, hard to get the wicks out. Gonna put it next to the Kayfuns on the "been there done that" that rack.
Also rebuilding a couple Orchids for a guy. This is more my thing, simple coils. .7Ω in this case. Stock Orchid. Tiny air and juice channels. This guy is using a Orchid I ground down as a loaner while I rebuild his. I wonder if he will be able to go back to the stock setup.
Also rebuilding a couple Orchids for a guy. This is more my thing, simple coils. .7Ω in this case. Stock Orchid. Tiny air and juice channels. This guy is using a Orchid I ground down as a loaner while I rebuild his. I wonder if he will be able to go back to the stock setup.
Dual coils, wrapped by hand using a screwdriver, with 14/13 wraps each using 32g Pure Nickel wire. ID is 3mm and ohm reading is .21. Built into my Deadmodz RDA and firing it with the Tesla TC 120w Dual 18650 box mod at 375 degrees F starting at 50w. Flavor of my Binary Liquids "Byte" is just outstanding. Clouds aren't bad either
That rampage build is just pretty!! I bet that takes a while to cool down.
Thanks. It's N80, so not too bad. It stops making vapor less than half a second after you let go of the button if you keep drawing air over it.
Just finished a nano dragon coil today, 2nd attempt at it and it came out pretty good. Anyway, the deets: 26 gauge kanthal, 10 wraps around a 1mm rod and it came out to approx .36 ohm
Vapin this right now. 28g ni200 2.5mm diameter 10 wraps .15 on the ipv d2. Its ok getting used to it still fiddling with the settings. This D2 is pretty awesome I recommend.
28g/36g dual twisted fused on freakshow mini.
24g/36g fused clapton on mutation x v2
and a 28g/36g clapton on a zephyrus(to lazy to pull it apart)
24g/36g fused clapton on mutation x v2
and a 28g/36g clapton on a zephyrus(to lazy to pull it apart)
Dual Clapton coils with a 28 gauge center and a 32 around it. Reading in at .2 on my sigeli 150 in a Hellboy RDA. Best claptons I have made to date! One coil is a little off sadly but works amazingly!
Sent from my iPhone using Tapatalk
Do you like your billow? I have given up on mine lately. Can't seem to get it to keep up with me. Too many dry hits
Some gorgeous builds on here ....
I feel inadequate lol
This is on my beat up formerly black IPV mini II
I feel inadequate lol
This is on my beat up formerly black IPV mini II
I'm a terrible photographer. This is the wildest build I have going on. Quad verticals using 27g. Other side is a mirror image. 0.35 ohm and vaping at 60W. It did keep up until my 100W limit of my mod so not sure what its true limit is.
I did the same thing tk my IPV Mini, i just wish i could polish it a little more so it doesnt looj so scrathed
- Status
